[Sun Jul 22 00:48:23 2012] Detection parameters:
  Position = (122.1, 267.6) = 20 29 28.32 41 45 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.2 +/- 9.4
  Background counts = 7.3
  Rate = 0.009 +/- 0.002

[Sun Jul 22 00:48:23 2012] Off-axis axis estimate = 12.98'
[Sun Jul 22 00:49:45 2012] Using EEF radius (= 12.92 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 00:49:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 00:49:45 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Sun Jul 22 00:49:45 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.017
[Sun Jul 22 00:49:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.92"
[Sun Jul 22 01:12:17 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 22 01:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 01:12:17 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 22 01:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 01:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 01:12:18 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 22 01:12:18 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 22 01:12:18 2012] Fit fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 22 02:10:08 2012] Spatial fit model total counts = 185.972000, observed total counts = 186.000000
[Sun Jul 22 02:10:08 2012] Offset between fit and detection position for source 1 = 0.208797 pixels
[Sun Jul 22 02:10:08 2012] 185.470300 total counts/ 157.681000 bgd. counts: snr = 2.213033
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.208797 pixels
  Position = (122.3, 267.7) = 20 29 28.25 41 45 18.1
  Extent = 5.0 (3.2-8.3)", rotation angle = 0
  Source counts = 27.8 +/- 13.6
  Background counts = 157.7
  Rate = 0.005 +/- 0.003
[Sun Jul 22 02:10:08 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:10:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:10:08 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 02:10:08 2012] Source does appear to be extended
[Sun Jul 22 02:10:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 02:10:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 22 02:10:20 2012] Initial guess for spatial extent in simple fitting = 4.96"
[Sun Jul 22 02:10:20 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.836
[Sun Jul 22 02:10:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.96"
[Sun Jul 22 02:33:27 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 22 02:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 02:33:27 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 22 02:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 02:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:33:27 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 22 02:33:27 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 22 02:33:27 2012] Fit fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 22 04:42:50 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Sun Jul 22 04:42:50 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 04:42:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 04:42:50 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 04:42:50 2012] Source does appear to be extended
[Sun Jul 22 04:42:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 04:43:03 2012] XMMSAS src. selection expression = ellipse(10587.960400, 23241.895600, 297.696609, 297.696609, 0.000000, X, Y)
[Sun Jul 22 04:43:03 2012] Writing source region out to fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 22 04:43:03 2012] Extracting stamp from image fullrun_pn_xmm0555690501_pi300-10000_cl_sm2.00.img.gz, (105, 251) - (139, 285)
[Sun Jul 22 04:43:03 2012] XMMSAS bgd. selection expression = annulus(10587.960400, 23241.895600, 496.161014, 992.322029, X, Y) && !ellipse(12403.037811, 24265.060883, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 04:43:03 2012] Writing fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src1.gif
[Sun Jul 22 04:43:07 2012] Mean detx,y = (-14720.32, 8889.68) 
[Sun Jul 22 04:43:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 04:43:21 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 04:43:22 2012] Setting source spectrum file to fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 22 04:43:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 22 04:50:56 2012] Not generating rmf since there are only 27 counts
[Sun Jul 22 04:50:56 2012] rmf not generated due to insufficient counts
[Sun Jul 22 05:20:25 2012] Updating aperture counts using extracted products
[Sun Jul 22 05:20:26 2012] Error reading totcts from fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 22 05:20:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 05:20:26 2012] Using photon index=1.80, rate=0.00542, arf fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src1.arf
[Sun Jul 22 05:20:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 05:20:26 2012] Updating source flux to 6.3e-14
[Sun Jul 22 05:21:33 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jul 22 05:22:23 2012] xmm0555690501/analysis//spectral/fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete