[Sun Jul 22 00:49:04 2012] Detection parameters:
  Position = (279.4, 218.0) = 20 28 27.14 41 41 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.9 +/- 6.3
  Background counts = 3.4
  Rate = 0.005 +/- 0.001

[Sun Jul 22 00:49:04 2012] Off-axis axis estimate = 5.99'
[Sun Jul 22 01:51:33 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 01:51:33 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Sun Jul 22 01:51:33 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.055
[Sun Jul 22 01:51:33 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.42"
[Sun Jul 22 02:10:03 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jul 22 02:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src10.csv
[Sun Jul 22 02:10:04 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jul 22 02:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src10.csv
[Sun Jul 22 02:10:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:10:04 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jul 22 02:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jul 22 02:10:04 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jul 22 02:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jul 22 02:10:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:10:14 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.685022 pixels away
[Sun Jul 22 02:10:14 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:10:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:10:14 2012] Assessing source extent using major
[Sun Jul 22 02:10:14 2012] Source does appear to be extended
[Sun Jul 22 02:10:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 04:25:18 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 04:25:18 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Sun Jul 22 04:25:18 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.055
[Sun Jul 22 04:25:18 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.42"
[Sun Jul 22 04:42:46 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jul 22 04:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src9.csv
[Sun Jul 22 04:42:46 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jul 22 04:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src9.csv
[Sun Jul 22 04:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 04:42:46 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jul 22 04:42:46 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jul 22 04:42:46 2012] Fit fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Jul 22 04:42:56 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 70.562503 pixels away
[Sun Jul 22 04:42:56 2012] Spatial fit model total counts = 48.759800, observed total counts = 50.000000
[Sun Jul 22 04:42:56 2012] Offset between fit and detection position for source 7 = 1.026140 pixels
[Sun Jul 22 04:42:56 2012] 47.835600 total counts/ 30.020500 bgd. counts: snr = 3.251467
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.026140 pixels
  Position = (280.4, 218.3) = 20 28 26.76 41 41 44.7
  Extent = 6.5 (4.4-11.0)", rotation angle = 0
  Source counts = 17.8 +/- 6.9
  Background counts = 30.0
  Rate = 0.003 +/- 0.001
[Sun Jul 22 04:42:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 04:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 04:42:56 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 04:42:56 2012] Source does appear to be extended
[Sun Jul 22 04:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 05:13:06 2012] XMMSAS src. selection expression = ellipse(24346.983000, 18947.000800, 389.658232, 389.658232, 0.000000, X, Y)
[Sun Jul 22 05:13:06 2012] Writing source region out to fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src7_src.reg
[Sun Jul 22 05:13:06 2012] Extracting stamp from image fullrun_mos2_xmm0555690501_pi300-10000_cl_sm2.00.img.gz, (258, 196) - (303, 241)
[Sun Jul 22 05:13:06 2012] XMMSAS bgd. selection expression = annulus(24346.983000, 18947.000800, 649.430386, 1298.860773, X, Y) && !ellipse(22345.408325, 20671.008789, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 05:13:06 2012] Writing fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src7.gif
[Sun Jul 22 05:15:15 2012] Mean detx,y = (366.12, -8728.58) 
[Sun Jul 22 05:15:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 05:15:26 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 05:15:26 2012] Setting source spectrum file to fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jul 22 05:15:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jul 22 05:20:02 2012] Not generating rmf since there are only 17 counts
[Sun Jul 22 05:20:02 2012] rmf not generated due to insufficient counts
[Sun Jul 22 05:20:27 2012] Updating aperture counts using extracted products
[Sun Jul 22 05:20:27 2012] Error reading totcts from fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jul 22 05:20:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 05:20:27 2012] Using photon index=1.80, rate=0.00266, arf fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src7.arf
[Sun Jul 22 05:20:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 05:20:27 2012] Updating source flux to 4.1e-14
[Sun Jul 22 05:21:02 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting