[Sun Jul 22 00:49:04 2012] Detection parameters:
  Position = (317.8, 313.1) = 20 28 12.23 41 48 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 549.2 +/- 28.0
  Background counts = 4.5
  Rate = 0.09 +/- 0.004

[Sun Jul 22 00:49:04 2012] Off-axis axis estimate = 1.76'
[Sun Jul 22 01:51:33 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 01:51:33 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jul 22 01:51:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sun Jul 22 01:51:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Sun Jul 22 02:10:03 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 22 02:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 02:10:03 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 22 02:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 02:10:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:10:04 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 22 02:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 22 02:10:04 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 22 02:10:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 22 02:10:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:10:14 2012] Source 1 is offset by 6.506056 and 5.778425 pixels which is larger than
2 X fitted extent = 0.839968 x 0.839968, not incorporating fit results
[Sun Jul 22 02:10:14 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:10:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:10:14 2012] Assessing source extent using major
[Sun Jul 22 02:10:14 2012] Source does appear to be extended
[Sun Jul 22 02:10:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 04:25:18 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 04:25:18 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jul 22 04:25:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sun Jul 22 04:25:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.31"
[Sun Jul 22 04:42:46 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 22 04:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 04:42:46 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 22 04:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 04:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 04:42:46 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 22 04:42:46 2012] fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 22 04:42:46 2012] Fit fullrun_mos2_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 22 04:42:56 2012] Spatial fit model total counts = 546.106000, observed total counts = 536.000000
[Sun Jul 22 04:42:56 2012] Offset between fit and detection position for source 1 = 0.141634 pixels
[Sun Jul 22 04:42:56 2012] 543.458000 total counts/ 171.162000 bgd. counts: snr = 28.456710
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.141634 pixels
  Position = (317.7, 313.1) = 20 28 12.28 41 48 36.9
  Extent = 5.5 (5.0-5.9)", rotation angle = 0
  Source counts = 372.3 +/- 23.3
  Background counts = 171.2
  Rate = 0.06 +/- 0.003
[Sun Jul 22 04:42:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 04:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 04:42:56 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 04:42:56 2012] Source does appear to be extended
[Sun Jul 22 04:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 05:13:06 2012] XMMSAS src. selection expression = ellipse(27587.476000, 27192.204200, 327.365517, 327.365517, 0.000000, X, Y)
[Sun Jul 22 05:13:06 2012] Writing source region out to fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 22 05:13:06 2012] Extracting stamp from image fullrun_mos2_xmm0555690501_pi300-10000_cl_sm2.00.img.gz, (299, 294) - (336, 332)
[Sun Jul 22 05:13:06 2012] XMMSAS bgd. selection expression = annulus(27587.476000, 27192.204200, 545.609194, 1091.218389, X, Y)
[Sun Jul 22 05:13:06 2012] Writing fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1.gif
[Sun Jul 22 05:13:08 2012] Mean detx,y = (28.11, 122.14) 
[Sun Jul 22 05:13:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 05:13:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 05:13:14 2012] Setting source spectrum file to fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 22 05:13:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 22 05:20:27 2012] Updating aperture counts using extracted products
[Sun Jul 22 05:20:27 2012] Error reading totcts from fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 22 05:20:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 05:20:27 2012] Using photon index=1.80, rate=0.0555, arf fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1.arf
[Sun Jul 22 05:20:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 05:20:27 2012] Updating source flux to 6.7e-13
[Sun Jul 22 05:21:02 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Jul 22 05:21:33 2012] Reading fit data from xmm0555690501/analysis//spectral/fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 22 05:21:33 2012] Spectral fit parameter nH value = 4.23547e+21
[Sun Jul 22 05:21:33 2012] Spectral fit parameter PhoIndex value = 9.999
[Sun Jul 22 05:21:33 2012] Failed to get F(0.3-8.0) from xmm0555690501/analysis//spectral/fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 22 05:21:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 05:21:33 2012] Using Nh = 4.2e+21, photon index=10.00, rate=0.0555, arf fullrun_mos2_xmm0555690501_pi300-10000_pass1_cl_src1.arf
[Sun Jul 22 05:21:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 05:21:33 2012] Updating source flux to 4.1e-13