[Sun Jul 22 00:48:45 2012] Detection parameters:
  Position = (198.5, 298.0) = 20 28 58.64 41 47 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 7.6
  Background counts = 3.4
  Rate = 0.01 +/- 0.002

[Sun Jul 22 00:48:45 2012] Off-axis axis estimate = 7.25'
[Sun Jul 22 01:12:18 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 01:12:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 01:12:18 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Sun Jul 22 01:12:18 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949
[Sun Jul 22 01:12:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.05"
[Sun Jul 22 01:51:32 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 22 01:51:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 01:51:32 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 22 01:51:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 01:51:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 01:51:32 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 22 01:51:32 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 22 01:51:32 2012] Fit fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jul 22 02:10:11 2012] Warning, spatial fit 3 centroid is now closest to src. 13
[Sun Jul 22 02:10:11 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:10:11 2012] Assessing source extent using major
[Sun Jul 22 02:10:11 2012] Source does appear to be extended
[Sun Jul 22 02:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 02:33:27 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 02:33:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 02:33:27 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Sun Jul 22 02:33:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949
[Sun Jul 22 02:33:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.05"
[Sun Jul 22 04:25:17 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 22 04:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 04:25:17 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 22 04:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 04:25:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 04:25:18 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 22 04:25:18 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 22 04:25:18 2012] Fit fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jul 22 04:42:54 2012] Warning, spatial fit 3 centroid is now closest to src. 18
[Sun Jul 22 04:42:54 2012] Spatial fit model total counts = 118.951000, observed total counts = 119.000000
[Sun Jul 22 04:42:54 2012] Offset between fit and detection position for source 6 = 6.090770 pixels
[Sun Jul 22 04:42:54 2012] Warning, changing simple spatial fit ID from 3 to 4
[Sun Jul 22 04:42:54 2012] 36.719510 total counts/ 0.021710 bgd. counts: snr = 249.065812
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 6.090770 pixels
  Position = (204.6, 298.4) = 20 28 56.27 41 47 32.5
  Extent = 18.6 (17.4-19.2)", rotation angle = 0
  Source counts = 36.7 +/- 6.1
  Background counts = 0.0
  Rate = 0.005 +/- 0.0009
[Sun Jul 22 04:42:54 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 04:42:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 04:42:54 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 04:42:54 2012] Source does appear to be extended
[Sun Jul 22 04:42:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 04:42:54 2012] Source is confused with source 13
[Sun Jul 22 05:01:12 2012] XMMSAS src. selection expression = ellipse(17748.600000, 25910.408000, 1117.794032, 1117.794032, 0.000000, X, Y)
[Sun Jul 22 05:01:12 2012] Writing source region out to fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src6_src.reg
[Sun Jul 22 05:01:12 2012] Extracting stamp from image fullrun_mos1_xmm0555690501_pi300-10000_cl_sm2.00.img.gz, (140, 234) - (269, 363)
[Sun Jul 22 05:01:12 2012] XMMSAS bgd. selection expression = annulus(17748.600000, 25910.408000, 1862.990054, 3725.980107, X, Y) && !ellipse(18955.522000, 25228.246000, 1303.592038, 1303.592038, 0.000000, X, Y) && !ellipse(19097.045400, 26700.054800, 2906.992084, 363.374410, 31.020000, X, Y) && !ellipse(19810.208000, 26367.315400, 1453.496042, 1453.496042, 0.000000, X, Y) && !ellipse(20322.087494, 28315.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17079.592200, 24262.526200, 405.128012, 405.128012, 0.000000, X, Y) && !ellipse(16218.031000, 30106.124400, 567.574384, 567.574384, 0.000000, X, Y) && !ellipse(14473.703880, 28803.270600, 410.212812, 410.212812, 0.000000, X, Y) && !ellipse(13369.171112, 27937.449615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15750.541229, 26560.636383, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 05:01:12 2012] Writing fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src6.gif
[Sun Jul 22 05:01:39 2012] Mean detx,y = (-4085.55, -9029.67) 
[Sun Jul 22 05:01:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 05:01:54 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 05:01:54 2012] Setting source spectrum file to fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 22 05:01:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jul 22 05:11:16 2012] Not generating rmf since there are only 36 counts
[Sun Jul 22 05:11:16 2012] rmf not generated due to insufficient counts
[Sun Jul 22 05:20:26 2012] Updating aperture counts using extracted products
[Sun Jul 22 05:20:26 2012] Error reading totcts from fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 22 05:20:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 05:20:26 2012] Using photon index=1.80, rate=0.00548, arf fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src6.arf
[Sun Jul 22 05:20:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 05:20:26 2012] Updating source flux to 8.9e-14
[Sun Jul 22 05:20:28 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Sun Jul 22 05:20:28 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting