[Sun Jul 22 00:48:45 2012] Detection parameters:
  Position = (225.4, 304.4) = 20 28 48.16 41 47 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.5 +/- 6.4
  Background counts = 3.7
  Rate = 0.005 +/- 0.002

[Sun Jul 22 00:48:45 2012] Off-axis axis estimate = 5.31'
[Sun Jul 22 01:12:18 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 01:12:18 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Sun Jul 22 01:12:18 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.933
[Sun Jul 22 01:12:18 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.08"
[Sun Jul 22 01:51:32 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jul 22 01:51:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src11.csv
[Sun Jul 22 01:51:32 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jul 22 01:51:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src11.csv
[Sun Jul 22 01:51:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 01:51:32 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jul 22 01:51:32 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jul 22 01:51:32 2012] Fit fullrun_mos1_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jul 22 02:10:11 2012] Source 15 is offset by -2.176466 and 7.832003 pixels which is larger than
2 X fitted extent = 1.074464 x 1.074464, not incorporating fit results
[Sun Jul 22 02:10:11 2012] Warning, spatial fit 11 centroid is now closest to src. 13
[Sun Jul 22 02:10:11 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:10:11 2012] Assessing source extent using major
[Sun Jul 22 02:10:11 2012] Source does appear to be extended
[Sun Jul 22 02:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 02:10:11 2012] Source is confused with source 13
[Sun Jul 22 02:33:27 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 02:33:27 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Sun Jul 22 02:33:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.933
[Sun Jul 22 02:33:27 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.08"
[Sun Jul 22 04:25:18 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jul 22 04:25:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src11.csv
[Sun Jul 22 04:25:18 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jul 22 04:25:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src11.csv
[Sun Jul 22 04:25:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 04:25:18 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jul 22 04:25:18 2012] fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jul 22 04:25:18 2012] Fit fullrun_mos1_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jul 22 04:42:54 2012] Spatial fit model total counts = 64.404300, observed total counts = 71.000000
[Sun Jul 22 04:42:54 2012] Offset between fit and detection position for source 15 = 2.951597 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.951597 pixels
  Position = (228.3, 303.6) = 20 28 47.06 41 47 55.5
  Extent = 18.2 (18.1-36.3)", rotation angle = 0
  Source counts = 58.4 +/- 7.6
  Background counts = 0.0
  Rate = 0.009 +/- 0.001
[Sun Jul 22 04:42:54 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 04:42:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 04:42:54 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 04:42:54 2012] Source does appear to be extended
[Sun Jul 22 04:42:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 05:01:12 2012] XMMSAS src. selection expression = ellipse(19810.208000, 26367.315400, 1090.122031, 1090.122031, 0.000000, X, Y)
[Sun Jul 22 05:01:12 2012] Writing source region out to fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src15_src.reg
[Sun Jul 22 05:01:12 2012] Extracting stamp from image fullrun_mos1_xmm0555690501_pi300-10000_cl_sm2.00.img.gz, (166, 241) - (291, 366)
[Sun Jul 22 05:01:12 2012] XMMSAS bgd. selection expression = annulus(19810.208000, 26367.315400, 1816.870052, 3633.740105, X, Y) && !ellipse(17748.600000, 25910.408000, 1490.392043, 1490.392043, 0.000000, X, Y) && !ellipse(18955.522000, 25228.246000, 1303.592038, 1303.592038, 0.000000, X, Y) && !ellipse(19097.045400, 26700.054800, 2906.992084, 363.374410, 31.020000, X, Y) && !ellipse(20322.087494, 28315.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17079.592200, 24262.526200, 405.128012, 405.128012, 0.000000, X, Y) && !ellipse(16218.031000, 30106.124400, 567.574384, 567.574384, 0.000000, X, Y) && !ellipse(15750.541229, 26560.636383, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 05:01:12 2012] Writing fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src15.gif
[Sun Jul 22 05:04:02 2012] Mean detx,y = (-3059.40, -7384.05) 
[Sun Jul 22 05:04:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 05:04:35 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 05:04:36 2012] Setting source spectrum file to fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jul 22 05:04:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Jul 22 05:11:51 2012] Not generating rmf since there are only 58 counts
[Sun Jul 22 05:11:51 2012] rmf not generated due to insufficient counts
[Sun Jul 22 05:20:26 2012] Updating aperture counts using extracted products
[Sun Jul 22 05:20:26 2012] Error reading totcts from fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jul 22 05:20:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 05:20:27 2012] Using photon index=1.80, rate=0.00873, arf fullrun_mos1_xmm0555690501_pi300-10000_pass1_cl_src15.arf
[Sun Jul 22 05:20:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 05:20:27 2012] Updating source flux to 1.2e-13
[Sun Jul 22 05:20:28 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Sun Jul 22 05:20:28 2012] Flag c found in src. 15 procflags, skipping spectral fitting
[Sun Jul 22 05:20:28 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting