[Sun Mar 11 21:03:04 2012] Detection parameters:
  Position = (409.1, 440.1) = 16 13 9.31 -52 0 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.5 +/- 22.2
  Background counts = 180.4
  Rate = 0.002 +/- 0.0005

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 13.03'
[Sun Mar 11 21:11:20 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:20 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Sun Mar 11 21:11:20 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Sun Mar 11 21:11:20 2012] Giving source the simple spatial ID 84 for pass 0, mean size = 12.95"
[Mon Mar 12 06:25:16 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src84.ximg exists
[Mon Mar 12 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src84.csv
[Mon Mar 12 06:25:16 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src84_1.ximg exists
[Mon Mar 12 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src84.csv
[Mon Mar 12 06:25:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:19 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Mon Mar 12 06:25:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src84.csv
[Mon Mar 12 06:25:19 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Mon Mar 12 06:25:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src84.csv
[Mon Mar 12 06:25:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:01:13 2012] Warning, spatial fit 84 centroid is now closest to src. 17
[Mon Mar 12 07:01:13 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 07:01:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 07:01:13 2012] Assessing source extent using major
[Mon Mar 12 07:01:13 2012] Source does appear to be extended
[Mon Mar 12 07:01:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:01:14 2012] Source is confused with source 87
[Mon Mar 12 07:01:14 2012] Source is confused with source 93
[Mon Mar 12 07:02:05 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:02:05 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Mon Mar 12 07:02:05 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Mon Mar 12 07:02:05 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 12.95"
[Mon Mar 12 18:24:21 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src72.ximg exists
[Mon Mar 12 18:24:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src72.csv
[Mon Mar 12 18:24:21 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src72_1.ximg exists
[Mon Mar 12 18:24:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src72.csv
[Mon Mar 12 18:24:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:24:25 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Mon Mar 12 18:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src72.csv
[Mon Mar 12 18:24:25 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Mon Mar 12 18:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src72.csv
[Mon Mar 12 18:24:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 19:02:05 2012] Warning, spatial fit 72 centroid is now closest to src. 17
[Mon Mar 12 19:02:06 2012] Source 84 is offset by 1.790468 and 0.449608 pixels which is larger than
2 X fitted extent = 1.444064 x 1.444064, not incorporating fit results
[Mon Mar 12 19:02:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:02:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:02:06 2012] Assessing source extent using major
[Mon Mar 12 19:02:06 2012] Source does appear to be extended
[Mon Mar 12 19:02:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:03:21 2012] XMMSAS src. selection expression = ellipse(35544.018280, 38242.167908, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 19:03:21 2012] Writing source region out to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src84_src.reg
[Mon Mar 12 19:03:21 2012] Extracting stamp from image fullrun_pn_xmm0555660101_pi300-10000_cl_sm2.00.img.gz, (372, 403) - (447, 478)
[Mon Mar 12 19:03:21 2012] XMMSAS bgd. selection expression = annulus(35544.018280, 38242.167908, 1087.500000, 2175.000000, X, Y) && !ellipse(35148.087036, 39264.744476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36727.619720, 41281.414459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35435.740875, 40905.303009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34640.296753, 40750.265228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37603.394409, 40558.134033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36213.072388, 40414.311096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.581543, 40223.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35741.021454, 40333.956635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34640.304000, 39581.412000, 2074.728060, 2074.728060, 0.000000, X, Y) && !ellipse(36021.400513, 39378.799225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34086.010000, 39143.896000, 2061.512059, 2061.512059, 0.000000, X, Y) && !ellipse(33774.478424, 39089.932037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36022.544830, 38131.530182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34827.351532, 37956.064606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34247.753326, 37803.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35513.408447, 37726.035522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33248.158691, 37258.081299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35382.701355, 37191.721497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34899.263000, 37014.819550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34224.513855, 37184.457336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35441.738586, 36666.585907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35012.210602, 36489.030823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33968.306183, 36231.670868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33240.698000, 36578.701000, 1877.488054, 1877.488054, 0.000000, X, Y) && !ellipse(36128.496429, 35670.830444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35419.691223, 35966.159973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33101.030243, 35497.512787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33522.293121, 35536.921387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34882.010620, 35288.569946, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 12 19:03:21 2012] Writing fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src84.gif
[Mon Mar 12 20:21:17 2012] Mean detx,y = (9119.55, -10456.82) 
[Mon Mar 12 20:21:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 20:22:00 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 20:22:01 2012] Setting source spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Mon Mar 12 20:22:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Tue Mar 13 02:04:23 2012] Not generating rmf since there are only 97 counts
[Tue Mar 13 02:04:23 2012] rmf not generated due to insufficient counts
[Tue Mar 13 04:24:20 2012] Updating aperture counts using extracted products
[Tue Mar 13 04:24:21 2012] Error reading totcts from fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Tue Mar 13 04:24:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 04:24:39 2012] Using photon index=1.80, rate=0.00215, arf fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src84.arf
[Tue Mar 13 04:24:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 04:24:39 2012] Updating source flux to 1.5e-14
[Tue Mar 13 04:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting