[Sun Mar 11 21:03:04 2012] Detection parameters:
  Position = (282.9, 453.0) = 16 14 8.76 -51 59 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.4 +/- 22.1
  Background counts = 52.1
  Rate = 0.005 +/- 0.0005

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 11.26'
[Sun Mar 11 21:11:19 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:19 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Sun Mar 11 21:11:19 2012] source mask rpix=2.8, npix_max = 42, mask sum = 29, frac = 0.677
[Sun Mar 11 21:11:19 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 12.06"
[Mon Mar 12 06:25:15 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src77.ximg exists
[Mon Mar 12 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src77.csv
[Mon Mar 12 06:25:15 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src77_1.ximg exists
[Mon Mar 12 06:25:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src77.csv
[Mon Mar 12 06:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:19 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Mon Mar 12 06:25:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src77.csv
[Mon Mar 12 06:25:19 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Mon Mar 12 06:25:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src77.csv
[Mon Mar 12 06:25:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:01:13 2012] Warning, spatial fit 77 centroid is now closest to src. 18
[Mon Mar 12 07:01:13 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 07:01:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 07:01:13 2012] Assessing source extent using major
[Mon Mar 12 07:01:13 2012] Source does appear to be extended
[Mon Mar 12 07:01:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:01:14 2012] Source is confused with source 16
[Mon Mar 12 07:02:05 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:02:05 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Mon Mar 12 07:02:05 2012] source mask rpix=2.8, npix_max = 42, mask sum = 29, frac = 0.677
[Mon Mar 12 07:02:05 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 12.06"
[Mon Mar 12 18:24:21 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src67.ximg exists
[Mon Mar 12 18:24:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src67.csv
[Mon Mar 12 18:24:21 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src67_1.ximg exists
[Mon Mar 12 18:24:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src67.csv
[Mon Mar 12 18:24:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:24:24 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Mon Mar 12 18:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Mon Mar 12 18:24:24 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Mon Mar 12 18:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Mon Mar 12 18:24:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 19:02:05 2012] Warning, spatial fit 67 centroid is now closest to src. 12
[Mon Mar 12 19:02:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:02:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:02:06 2012] Assessing source extent using major
[Mon Mar 12 19:02:06 2012] Source does appear to be extended
[Mon Mar 12 19:02:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:03:20 2012] XMMSAS src. selection expression = ellipse(24567.601471, 39358.711273, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 19:03:20 2012] Writing source region out to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src77_src.reg
[Mon Mar 12 19:03:20 2012] Extracting stamp from image fullrun_pn_xmm0555660101_pi300-10000_cl_sm2.00.img.gz, (245, 415) - (320, 490)
[Mon Mar 12 19:03:21 2012] XMMSAS bgd. selection expression = annulus(24567.601471, 39358.711273, 1087.500000, 2175.000000, X, Y) && !ellipse(24609.250916, 42054.566956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24631.433685, 41622.548553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24635.179932, 40849.183655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25398.315002, 40402.405945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.495880, 39838.427277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25125.927582, 39446.948517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24696.545624, 38841.745209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24778.806396, 37451.176270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25245.868530, 41707.222748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25780.684357, 41794.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.443939, 41524.623108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.419769, 40407.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.963806, 39881.149353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.651600, 39323.768000, 1954.856056, 1954.856056, 0.000000, X, Y) && !ellipse(25573.862885, 39356.913818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27388.854187, 38411.803040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26406.334045, 38321.999329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.471283, 37877.380157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.935944, 37881.298981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27362.091492, 37311.572174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.232208, 37369.257996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26336.992645, 37369.475708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.756927, 36581.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24882.994000, 36707.882000, 1313.320038, 1313.320038, 0.000000, X, Y) && !ellipse(24883.836000, 36568.514000, 1588.200046, 1588.200046, 0.000000, X, Y)
[Mon Mar 12 19:03:21 2012] Writing fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src77.gif
[Mon Mar 12 20:15:49 2012] Mean detx,y = (-1690.39, -11988.61) 
[Mon Mar 12 20:15:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 20:16:32 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 20:16:33 2012] Setting source spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Mon Mar 12 20:16:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Tue Mar 13 01:58:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 01:58:41 2012] rmf not generated due to insufficient counts
[Tue Mar 13 04:24:20 2012] Updating aperture counts using extracted products
[Tue Mar 13 04:24:20 2012] Error reading totcts from fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Tue Mar 13 04:24:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 04:24:39 2012] Using photon index=1.80, rate=0.00501, arf fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src77.arf
[Tue Mar 13 04:24:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 04:24:39 2012] Updating source flux to 1.1e-13
[Tue Mar 13 04:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting