[Sun Mar 11 21:03:01 2012] Detection parameters:
  Position = (112.7, 312.0) = 16 15 29.30 -52 10 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.2 +/- 29.2
  Background counts = 100.6
  Rate = 0.007 +/- 0.0006

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 13.51'
[Sun Mar 11 21:11:19 2012] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:19 2012] Initial guess for spatial extent in simple fitting = 13.18"
[Sun Mar 11 21:11:19 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.983
[Sun Mar 11 21:11:19 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.18"
[Mon Mar 12 06:25:13 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src6.ximg exists
[Mon Mar 12 06:25:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src6.csv
[Mon Mar 12 06:25:13 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Mar 12 06:25:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src6.csv
[Mon Mar 12 06:25:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:16 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Mar 12 06:25:16 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Mar 12 06:25:16 2012] Fit fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Mar 12 07:01:12 2012] Warning, spatial fit 6 centroid is now closest to src. 249
[Mon Mar 12 07:01:13 2012] Source 6 is offset by -1.457059 and -2.890761 pixels which is larger than
2 X fitted extent = 1.490883 x 1.490883, not incorporating fit results
[Mon Mar 12 07:01:13 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 07:01:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 07:01:13 2012] Assessing source extent using major
[Mon Mar 12 07:01:13 2012] Source does appear to be extended
[Mon Mar 12 07:01:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:01:14 2012] Source is confused with source 4
[Mon Mar 12 07:02:05 2012] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:02:05 2012] Initial guess for spatial extent in simple fitting = 13.18"
[Mon Mar 12 07:02:05 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.983
[Mon Mar 12 07:02:05 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.18"
[Mon Mar 12 18:24:19 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src6.ximg exists
[Mon Mar 12 18:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src6.csv
[Mon Mar 12 18:24:19 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Mar 12 18:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src6.csv
[Mon Mar 12 18:24:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:24:22 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Mar 12 18:24:22 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Mar 12 18:24:22 2012] Fit fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Mar 12 19:02:04 2012] Warning, spatial fit 6 centroid is now closest to src. 28
[Mon Mar 12 19:02:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:02:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:02:06 2012] Assessing source extent using major
[Mon Mar 12 19:02:06 2012] Source does appear to be extended
[Mon Mar 12 19:02:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:03:11 2012] XMMSAS src. selection expression = ellipse(9752.261871, 27098.441772, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 19:03:11 2012] Writing source region out to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src6_src.reg
[Mon Mar 12 19:03:11 2012] Extracting stamp from image fullrun_pn_xmm0555660101_pi300-10000_cl_sm2.00.img.gz, (75, 275) - (150, 350)
[Mon Mar 12 19:03:11 2012] XMMSAS bgd. selection expression = annulus(9752.261871, 27098.441772, 1087.500000, 2175.000000, X, Y) && !ellipse(8901.984756, 27446.930298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9988.905000, 27572.898400, 764.049622, 764.049622, 0.000000, X, Y) && !ellipse(10728.129837, 27530.043335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11430.411636, 27573.155701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12997.770800, 27683.746000, 2178.968063, 1116.624032, 339.250300, X, Y) && !ellipse(9511.288757, 27488.545227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12795.080765, 27022.080475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11650.812256, 27102.758850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10223.327126, 26928.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12147.323975, 26840.680908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11061.027367, 26759.370636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9777.374466, 26580.087128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9183.895767, 26668.855377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12348.969467, 26420.416321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10707.565308, 26236.173218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11686.296722, 26226.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11226.388565, 26062.669708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8880.588539, 25973.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9284.038826, 25803.621155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11724.732254, 25708.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10591.690536, 25393.801453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12583.792206, 25708.892365, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 12 19:03:11 2012] Writing fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src6.gif
[Mon Mar 12 19:08:38 2012] Mean detx,y = (-17160.59, -309.61) 
[Mon Mar 12 19:08:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 19:09:13 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 19:09:13 2012] Setting source spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Mar 12 19:09:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Mar 13 01:10:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 01:10:51 2012] rmf not generated due to insufficient counts
[Tue Mar 13 04:24:17 2012] Updating aperture counts using extracted products
[Tue Mar 13 04:24:17 2012] Error reading totcts from fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 04:24:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 04:24:35 2012] Using photon index=1.80, rate=0.00729, arf fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src6.arf
[Tue Mar 13 04:24:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 04:24:35 2012] Updating source flux to 6.5e-14
[Tue Mar 13 04:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting