[Sun Mar 11 21:03:03 2012] Detection parameters:
  Position = (290.7, 480.0) = 16 14 5.08 -51 57 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.8 +/- 27.6
  Background counts = 91.5
  Rate = 0.006 +/- 0.0006

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 13.17'
[Sun Mar 11 21:11:19 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:19 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Sun Mar 11 21:11:19 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Sun Mar 11 21:11:19 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 13.01"
[Mon Mar 12 06:25:15 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src53.ximg exists
[Mon Mar 12 06:25:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src53.csv
[Mon Mar 12 06:25:15 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src53_1.ximg exists
[Mon Mar 12 06:25:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src53.csv
[Mon Mar 12 06:25:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:18 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Mon Mar 12 06:25:18 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Mon Mar 12 06:25:18 2012] Fit fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Mon Mar 12 07:01:12 2012] Source 53 is offset by 3.511627 and 0.191848 pixels which is larger than
2 X fitted extent = 1.538212 x 1.538212, not incorporating fit results
[Mon Mar 12 07:01:12 2012] Spatial fit model total counts = 1288.370000, observed total counts = 944.000000
[Mon Mar 12 07:01:12 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar 12 07:01:13 2012] Warning, spatial fit 53 centroid is now closest to src. 62
[Mon Mar 12 07:01:13 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 07:01:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 07:01:13 2012] Assessing source extent using major
[Mon Mar 12 07:01:13 2012] Source does appear to be extended
[Mon Mar 12 07:01:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:01:14 2012] Source is confused with source 11
[Mon Mar 12 07:01:14 2012] Source is confused with source 56
[Mon Mar 12 07:02:05 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:02:05 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Mon Mar 12 07:02:05 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Mon Mar 12 07:02:05 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 13.01"
[Mon Mar 12 18:24:20 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src47.ximg exists
[Mon Mar 12 18:24:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src47.csv
[Mon Mar 12 18:24:20 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src47_1.ximg exists
[Mon Mar 12 18:24:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src47.csv
[Mon Mar 12 18:24:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:24:24 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Mon Mar 12 18:24:24 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Mon Mar 12 18:24:24 2012] Fit fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Mon Mar 12 19:02:05 2012] Warning, spatial fit 47 centroid is now closest to src. 68
[Mon Mar 12 19:02:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:02:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:02:06 2012] Assessing source extent using major
[Mon Mar 12 19:02:06 2012] Source does appear to be extended
[Mon Mar 12 19:02:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:03:18 2012] XMMSAS src. selection expression = ellipse(25245.868530, 41707.222748, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 19:03:18 2012] Writing source region out to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src53_src.reg
[Mon Mar 12 19:03:18 2012] Extracting stamp from image fullrun_pn_xmm0555660101_pi300-10000_cl_sm2.00.img.gz, (253, 442) - (328, 517)
[Mon Mar 12 19:03:18 2012] XMMSAS bgd. selection expression = annulus(25245.868530, 41707.222748, 1087.500000, 2175.000000, X, Y) && !ellipse(24698.478485, 43011.880249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.394806, 42573.431366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24609.250916, 42054.566956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24631.433685, 41622.548553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24635.179932, 40849.183655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25398.315002, 40402.405945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.495880, 39838.427277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25125.927582, 39446.948517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24696.545624, 38841.745209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24691.139984, 43541.744446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.897400, 43778.556000, 2169.152062, 2169.152062, 0.000000, X, Y) && !ellipse(25516.307159, 43266.919708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26182.002655, 43022.075562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.027405, 42763.475708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.731903, 42411.721497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25780.684357, 41794.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.443939, 41524.623108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.419769, 40407.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.963806, 39881.149353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.651600, 39323.768000, 1954.856056, 1954.856056, 0.000000, X, Y) && !ellipse(25573.862885, 39356.913818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24567.601471, 39358.711273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25455.684875, 43762.032227, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 12 19:03:18 2012] Writing fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src53.gif
[Mon Mar 12 19:53:26 2012] Mean detx,y = (-1138.56, -14325.99) 
[Mon Mar 12 19:53:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 19:53:51 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 19:53:51 2012] Setting source spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Mar 12 19:53:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Tue Mar 13 01:42:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 01:42:19 2012] rmf not generated due to insufficient counts
[Tue Mar 13 04:24:19 2012] Updating aperture counts using extracted products
[Tue Mar 13 04:24:19 2012] Error reading totcts from fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Mar 13 04:24:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 04:24:38 2012] Using photon index=1.80, rate=0.0057, arf fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src53.arf
[Tue Mar 13 04:24:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 04:24:38 2012] Updating source flux to 3.8e-14
[Tue Mar 13 04:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting