[Sun Mar 11 21:03:02 2012] Detection parameters:
  Position = (156.5, 318.0) = 16 15 8.57 -52 9 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 371.0 +/- 26.3
  Background counts = 87.5
  Rate = 0.008 +/- 0.0006

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 10.39'
[Sun Mar 11 21:11:19 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:19 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Sun Mar 11 21:11:19 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.044
[Sun Mar 11 21:11:19 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 11.62"
[Mon Mar 12 06:25:14 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Mar 12 06:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src29.csv
[Mon Mar 12 06:25:14 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Mar 12 06:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src29.csv
[Mon Mar 12 06:25:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:17 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Mar 12 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Mar 12 06:25:17 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Mar 12 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Mar 12 06:25:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:01:12 2012] Warning, spatial fit 29 centroid is now closest to src. 30
[Mon Mar 12 07:01:12 2012] Source 29 is offset by 1.544701 and -4.420704 pixels which is larger than
2 X fitted extent = 1.370685 x 1.370685, not incorporating fit results
[Mon Mar 12 07:01:13 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 07:01:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 07:01:13 2012] Assessing source extent using major
[Mon Mar 12 07:01:13 2012] Source does appear to be extended
[Mon Mar 12 07:01:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:01:14 2012] Source is confused with source 25
[Mon Mar 12 07:02:05 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:02:05 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Mon Mar 12 07:02:05 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.044
[Mon Mar 12 07:02:05 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 11.62"
[Mon Mar 12 18:24:20 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src27.ximg exists
[Mon Mar 12 18:24:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src27.csv
[Mon Mar 12 18:24:20 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Mar 12 18:24:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src27.csv
[Mon Mar 12 18:24:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:24:23 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Mar 12 18:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Mar 12 18:24:23 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Mar 12 18:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Mar 12 18:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 19:02:04 2012] Warning, spatial fit 27 centroid is now closest to src. 213
[Mon Mar 12 19:02:04 2012] Source 29 is offset by 1.513322 and -4.455325 pixels which is larger than
2 X fitted extent = 1.369522 x 1.369522, not incorporating fit results
[Mon Mar 12 19:02:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:02:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:02:06 2012] Assessing source extent using major
[Mon Mar 12 19:02:06 2012] Source does appear to be extended
[Mon Mar 12 19:02:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:03:15 2012] XMMSAS src. selection expression = ellipse(13563.879013, 27616.870758, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 19:03:15 2012] Writing source region out to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src29_src.reg
[Mon Mar 12 19:03:15 2012] Extracting stamp from image fullrun_pn_xmm0555660101_pi300-10000_cl_sm2.00.img.gz, (119, 280) - (194, 355)
[Mon Mar 12 19:03:15 2012] XMMSAS bgd. selection expression = annulus(13563.879013, 27616.870758, 1087.500000, 2175.000000, X, Y) && !ellipse(10728.129837, 27530.043335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11430.411636, 27573.155701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16123.029892, 27751.998474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12997.770800, 27683.746000, 2178.968063, 1116.624032, 339.250300, X, Y) && !ellipse(15549.350000, 27801.943200, 1745.784050, 1111.016032, 353.576670, X, Y) && !ellipse(14859.742000, 27513.194000, 1251.400036, 1251.400036, 0.000000, X, Y) && !ellipse(12795.080765, 27022.080475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11650.812256, 27102.758850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12147.323975, 26840.680908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11061.027367, 26759.370636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13367.171875, 26837.083344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14245.958694, 27678.459473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14210.606979, 27280.191803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15674.922012, 27186.979034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14643.463043, 27197.668182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16122.626328, 27014.683563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15230.389130, 26663.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14688.752533, 26656.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15149.101425, 26248.235016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12348.969467, 26420.416321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10707.565308, 26236.173218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11686.296722, 26226.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15766.004120, 26578.661377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12934.278641, 26399.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14975.527557, 25708.902985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11226.388565, 26062.669708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14381.305450, 25794.522369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15647.945587, 25630.561035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11724.732254, 25708.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10591.690536, 25393.801453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13408.623520, 25445.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12583.792206, 25708.892365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16098.970016, 25435.371246, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 12 19:03:15 2012] Writing fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src29.gif
[Mon Mar 12 19:32:05 2012] Mean detx,y = (-13429.35, -560.09) 
[Mon Mar 12 19:32:11 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 19:32:48 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 19:32:49 2012] Setting source spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Mar 12 19:32:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Mar 13 01:30:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 01:30:10 2012] rmf not generated due to insufficient counts
[Tue Mar 13 04:24:19 2012] Updating aperture counts using extracted products
[Tue Mar 13 04:24:19 2012] Error reading totcts from fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Mar 13 04:24:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 04:24:36 2012] Using photon index=1.80, rate=0.00817, arf fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src29.arf
[Tue Mar 13 04:24:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 04:24:36 2012] Updating source flux to 6.3e-14
[Tue Mar 13 04:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting