[Sun Mar 11 21:03:02 2012] Detection parameters:
  Position = (404.6, 451.9) = 16 13 11.47 -52 0 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.1 +/- 28.8
  Background counts = 165.6
  Rate = 0.004 +/- 0.0006

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 13.53'
[Sun Mar 11 21:11:19 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:19 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Sun Mar 11 21:11:19 2012] source mask rpix=3.0, npix_max = 49, mask sum = 32, frac = 0.641
[Sun Mar 11 21:11:19 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 13.19"
[Mon Mar 12 06:25:14 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Mar 12 06:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src17.csv
[Mon Mar 12 06:25:14 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Mar 12 06:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src17.csv
[Mon Mar 12 06:25:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:17 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Mar 12 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Mar 12 06:25:17 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Mar 12 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Mar 12 06:25:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:01:12 2012] Warning, spatial fit 17 centroid is now closest to src. 66
[Mon Mar 12 07:01:13 2012] Source 17 is offset by -4.892747 and -0.708684 pixels which is larger than
2 X fitted extent = 1.488028 x 1.488028, not incorporating fit results
[Mon Mar 12 07:01:13 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 07:01:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 07:01:13 2012] Assessing source extent using major
[Mon Mar 12 07:01:13 2012] Source does appear to be extended
[Mon Mar 12 07:01:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:01:14 2012] Source is confused with source 71
[Mon Mar 12 07:02:05 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:02:05 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Mon Mar 12 07:02:05 2012] source mask rpix=3.0, npix_max = 49, mask sum = 32, frac = 0.641
[Mon Mar 12 07:02:05 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 13.19"
[Mon Mar 12 18:24:20 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src16.ximg exists
[Mon Mar 12 18:24:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src16.csv
[Mon Mar 12 18:24:20 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Mar 12 18:24:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src16.csv
[Mon Mar 12 18:24:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:24:23 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Mar 12 18:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Mon Mar 12 18:24:23 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Mar 12 18:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Mon Mar 12 18:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 19:02:04 2012] Warning, spatial fit 16 centroid is now closest to src. 80
[Mon Mar 12 19:02:05 2012] Source 17 is offset by 3.652817 and 0.669730 pixels which is larger than
2 X fitted extent = 1.503862 x 1.503862, not incorporating fit results
[Mon Mar 12 19:02:05 2012] Source 17 is offset by -4.791990 and -0.976431 pixels which is larger than
2 X fitted extent = 1.488028 x 1.488028, not incorporating fit results
[Mon Mar 12 19:02:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:02:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:02:06 2012] Assessing source extent using major
[Mon Mar 12 19:02:06 2012] Source does appear to be extended
[Mon Mar 12 19:02:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:03:13 2012] XMMSAS src. selection expression = ellipse(35148.087036, 39264.744476, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 19:03:13 2012] Writing source region out to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src17_src.reg
[Mon Mar 12 19:03:13 2012] Extracting stamp from image fullrun_pn_xmm0555660101_pi300-10000_cl_sm2.00.img.gz, (367, 414) - (442, 489)
[Mon Mar 12 19:03:13 2012] XMMSAS bgd. selection expression = annulus(35148.087036, 39264.744476, 1087.500000, 2175.000000, X, Y) && !ellipse(35247.727631, 41617.888977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36727.619720, 41281.414459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36045.871918, 41326.154358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35435.740875, 40905.303009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34640.296753, 40750.265228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37603.394409, 40558.134033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36213.072388, 40414.311096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.581543, 40223.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35741.021454, 40333.956635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34640.304000, 39581.412000, 2074.728060, 2074.728060, 0.000000, X, Y) && !ellipse(36021.400513, 39378.799225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34086.010000, 39143.896000, 2061.512059, 2061.512059, 0.000000, X, Y) && !ellipse(33774.478424, 39089.932037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35544.018280, 38242.167908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36022.544830, 38131.530182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34827.351532, 37956.064606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34247.753326, 37803.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35513.408447, 37726.035522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33248.158691, 37258.081299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35382.701355, 37191.721497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34899.263000, 37014.819550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34224.513855, 37184.457336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35441.738586, 36666.585907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35012.210602, 36489.030823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33968.306183, 36231.670868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33240.698000, 36578.701000, 1877.488054, 1877.488054, 0.000000, X, Y)
[Mon Mar 12 19:03:13 2012] Writing fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src17.gif
[Mon Mar 12 19:19:06 2012] Mean detx,y = (8684.93, -11520.82) 
[Mon Mar 12 19:19:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 19:19:44 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 19:19:45 2012] Setting source spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Mar 12 19:19:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Mar 13 01:15:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 01:15:28 2012] rmf not generated due to insufficient counts
[Tue Mar 13 04:24:18 2012] Updating aperture counts using extracted products
[Tue Mar 13 04:24:18 2012] Error reading totcts from fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 13 04:24:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 04:24:35 2012] Using photon index=1.80, rate=0.0041, arf fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src17.arf
[Tue Mar 13 04:24:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 04:24:35 2012] Updating source flux to 7.6e-14
[Tue Mar 13 04:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting