[Sun Mar 11 21:03:01 2012] Detection parameters:
  Position = (311.7, 458.5) = 16 13 55.20 -51 59 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 240.6 +/- 49.0
  Background counts = 181.5
  Rate = 0.005 +/- 0.001

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 11.64'
[Sun Mar 11 21:11:19 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:19 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Sun Mar 11 21:11:19 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.728
[Sun Mar 11 21:11:19 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.25"
[Mon Mar 12 06:25:14 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src15.ximg exists
[Mon Mar 12 06:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src15.csv
[Mon Mar 12 06:25:14 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Mar 12 06:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src15.csv
[Mon Mar 12 06:25:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:17 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Mar 12 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Mar 12 06:25:17 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Mar 12 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Mar 12 06:25:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:01:12 2012] Warning, spatial fit 15 centroid is now closest to src. 63
[Mon Mar 12 07:01:13 2012] Source 15 is offset by -7.382599 and 0.577118 pixels which is larger than
2 X fitted extent = 1.450837 x 1.450837, not incorporating fit results
[Mon Mar 12 07:01:13 2012] Source 15 is offset by -1.626254 and 4.389486 pixels which is larger than
2 X fitted extent = 1.358244 x 1.358244, not incorporating fit results
[Mon Mar 12 07:01:13 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 07:01:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 07:01:13 2012] Assessing source extent using major
[Mon Mar 12 07:01:13 2012] Source does appear to be extended
[Mon Mar 12 07:01:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:01:14 2012] Source is confused with source 72
[Mon Mar 12 07:02:05 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:02:05 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Mon Mar 12 07:02:05 2012] source mask rpix=2.8, npix_max = 43, mask sum = 32, frac = 0.728
[Mon Mar 12 07:02:05 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 12.25"
[Mon Mar 12 18:24:19 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Mar 12 18:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src14.csv
[Mon Mar 12 18:24:19 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Mar 12 18:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src14.csv
[Mon Mar 12 18:24:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:24:23 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Mar 12 18:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Mar 12 18:24:23 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Mar 12 18:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Mar 12 18:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 19:02:04 2012] Source 15 is offset by -6.223105 and -5.316353 pixels which is larger than
2 X fitted extent = 4.676828 x 11.264138, not incorporating fit results
[Mon Mar 12 19:02:05 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.351745 pixels away
[Mon Mar 12 19:02:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:02:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:02:06 2012] Assessing source extent using major
[Mon Mar 12 19:02:06 2012] Source does appear to be extended
[Mon Mar 12 19:02:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:03:12 2012] XMMSAS src. selection expression = ellipse(27071.495880, 39838.427277, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 19:03:12 2012] Writing source region out to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src15_src.reg
[Mon Mar 12 19:03:12 2012] Extracting stamp from image fullrun_pn_xmm0555660101_pi300-10000_cl_sm2.00.img.gz, (274, 421) - (349, 496)
[Mon Mar 12 19:03:13 2012] XMMSAS bgd. selection expression = annulus(27071.495880, 39838.427277, 1087.500000, 2175.000000, X, Y) && !ellipse(24893.394806, 42573.431366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24609.250916, 42054.566956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24631.433685, 41622.548553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24635.179932, 40849.183655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25398.315002, 40402.405945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25125.927582, 39446.948517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24696.545624, 38841.745209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24778.806396, 37451.176270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.897400, 43778.556000, 2169.152062, 2169.152062, 0.000000, X, Y) && !ellipse(26486.027405, 42763.475708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.731903, 42411.721497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25245.868530, 41707.222748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25780.684357, 41794.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.443939, 41524.623108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.419769, 40407.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.963806, 39881.149353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.651600, 39323.768000, 1954.856056, 1954.856056, 0.000000, X, Y) && !ellipse(25573.862885, 39356.913818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24567.601471, 39358.711273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27388.854187, 38411.803040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26406.334045, 38321.999329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.471283, 37877.380157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.935944, 37881.298981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27362.091492, 37311.572174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.232208, 37369.257996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26336.992645, 37369.475708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24882.994000, 36707.882000, 1313.320038, 1313.320038, 0.000000, X, Y) && !ellipse(24883.836000, 36568.514000, 1588.200046, 1588.200046, 0.000000, X, Y)
[Mon Mar 12 19:03:13 2012] Writing fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src15.gif
[Mon Mar 12 19:16:56 2012] Mean detx,y = (608.33, -12362.25) 
[Mon Mar 12 19:17:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 19:17:39 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 19:17:39 2012] Setting source spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon Mar 12 19:17:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Mar 13 01:14:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 01:14:36 2012] rmf not generated due to insufficient counts
[Tue Mar 13 04:24:18 2012] Updating aperture counts using extracted products
[Tue Mar 13 04:24:18 2012] Error reading totcts from fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Mar 13 04:24:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 04:24:35 2012] Using photon index=1.80, rate=0.0053, arf fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src15.arf
[Tue Mar 13 04:24:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 04:24:35 2012] Getting flux using calc_pl_flux failed
[Tue Mar 13 04:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting