[Sun Mar 11 21:03:01 2012] Detection parameters:
  Position = (285.3, 461.0) = 16 14 7.65 -51 59 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 438.1 +/- 28.6
  Background counts = 61.7
  Rate = 0.01 +/- 0.0006

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 11.82'
[Sun Mar 11 21:11:19 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:19 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Sun Mar 11 21:11:19 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Sun Mar 11 21:11:19 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.34"
[Mon Mar 12 06:25:13 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src14.ximg exists
[Mon Mar 12 06:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src14.csv
[Mon Mar 12 06:25:14 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Mar 12 06:25:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src14.csv
[Mon Mar 12 06:25:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:17 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Mar 12 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon Mar 12 06:25:17 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Mar 12 06:25:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon Mar 12 06:25:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:01:12 2012] Source 14 is offset by 9.750266 and 0.319049 pixels which is larger than
2 X fitted extent = 2.088717 x 2.088717, not incorporating fit results
[Mon Mar 12 07:01:12 2012] Warning, spatial fit 14 centroid is now closest to src. 75
[Mon Mar 12 07:01:13 2012] Spatial fit model total counts = 1495.950000, observed total counts = 1484.000000
[Mon Mar 12 07:01:13 2012] Offset between fit and detection position for source 14 = 0.477885 pixels
[Mon Mar 12 07:01:13 2012] Warning, changing simple spatial fit ID from 14 to 70
[Mon Mar 12 07:01:13 2012] 1355.370900 total counts/ 1336.910000 bgd. counts: snr = 0.504896
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.477885 pixels
  Position = (285.0, 461.3) = 16 14 7.80 -51 59 19.2
  Extent = 3.1" x 3.1", rotation angle = 0
  Source counts = 18.5 +/- 36.8
  Background counts = 1336.9
  Rate = 0.0006 +/- 0.001
  Deleting source due to low Poisson probability