[Sun Mar 11 21:03:05 2012] Detection parameters:
  Position = (407.3, 428.0) = 16 13 10.17 -52 1 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.5 +/- 20.9
  Background counts = 164.7
  Rate = 0.002 +/- 0.0005

[Sun Mar 11 21:03:16 2012] Off-axis axis estimate = 12.27'
[Sun Mar 11 21:11:20 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 21:11:20 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Sun Mar 11 21:11:20 2012] source mask rpix=2.9, npix_max = 45, mask sum = 30, frac = 0.653
[Sun Mar 11 21:11:20 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 12.56"
[Mon Mar 12 06:25:16 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src100.ximg exists
[Mon Mar 12 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src100.csv
[Mon Mar 12 06:25:16 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src100_1.ximg exists
[Mon Mar 12 06:25:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src100.csv
[Mon Mar 12 06:25:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 06:25:20 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Mon Mar 12 06:25:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src100.csv
[Mon Mar 12 06:25:20 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Mon Mar 12 06:25:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src100.csv
[Mon Mar 12 06:25:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 07:01:13 2012] Source 101 is offset by -4.895548 and 2.199259 pixels which is larger than
2 X fitted extent = 1.456345 x 1.456345, not incorporating fit results
[Mon Mar 12 07:01:13 2012] Warning, spatial fit 100 centroid is now closest to src. 87
[Mon Mar 12 07:01:13 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 07:01:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 07:01:13 2012] Assessing source extent using major
[Mon Mar 12 07:01:13 2012] Source does appear to be extended
[Mon Mar 12 07:01:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:01:14 2012] Source is confused with source 93
[Mon Mar 12 07:01:14 2012] Source is confused with source 102
[Mon Mar 12 07:01:14 2012] Source is confused with source 104
[Mon Mar 12 07:02:05 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 07:02:05 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Mon Mar 12 07:02:05 2012] source mask rpix=2.9, npix_max = 45, mask sum = 30, frac = 0.653
[Mon Mar 12 07:02:05 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 12.56"
[Mon Mar 12 18:24:22 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src85.ximg exists
[Mon Mar 12 18:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src85.csv
[Mon Mar 12 18:24:22 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src85_1.ximg exists
[Mon Mar 12 18:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src85.csv
[Mon Mar 12 18:24:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 18:24:25 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Mon Mar 12 18:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src85.csv
[Mon Mar 12 18:24:25 2012] fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Mon Mar 12 18:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src85.csv
[Mon Mar 12 18:24:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555660101_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 19:02:06 2012] Warning, spatial fit 85 centroid is now closest to src. 84
[Mon Mar 12 19:02:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 19:02:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 19:02:06 2012] Assessing source extent using major
[Mon Mar 12 19:02:06 2012] Source does appear to be extended
[Mon Mar 12 19:02:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 19:03:23 2012] XMMSAS src. selection expression = ellipse(35382.701355, 37191.721497, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 19:03:23 2012] Writing source region out to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src101_src.reg
[Mon Mar 12 19:03:23 2012] Extracting stamp from image fullrun_pn_xmm0555660101_pi300-10000_cl_sm2.00.img.gz, (370, 391) - (445, 466)
[Mon Mar 12 19:03:23 2012] XMMSAS bgd. selection expression = annulus(35382.701355, 37191.721497, 1087.500000, 2175.000000, X, Y) && !ellipse(34038.433472, 35170.800812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35148.087036, 39264.744476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.581543, 40223.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34640.304000, 39581.412000, 2074.728060, 2074.728060, 0.000000, X, Y) && !ellipse(36021.400513, 39378.799225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34086.010000, 39143.896000, 2061.512059, 2061.512059, 0.000000, X, Y) && !ellipse(33774.478424, 39089.932037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35544.018280, 38242.167908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36022.544830, 38131.530182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34827.351532, 37956.064606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34247.753326, 37803.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35513.408447, 37726.035522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33248.158691, 37258.081299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34899.263000, 37014.819550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34224.513855, 37184.457336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35441.738586, 36666.585907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35012.210602, 36489.030823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33968.306183, 36231.670868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33240.698000, 36578.701000, 1877.488054, 1877.488054, 0.000000, X, Y) && !ellipse(36128.496429, 35670.830444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35419.691223, 35966.159973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33101.030243, 35497.512787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33522.293121, 35536.921387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34882.010620, 35288.569946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35959.872864, 35165.610229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33141.320312, 35032.765839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36836.760010, 34649.528290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35528.600525, 34653.954224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.917358, 34668.556885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33970.878906, 34668.381653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36200.328247, 34450.061249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34873.588867, 34223.473083, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 12 19:03:23 2012] Writing fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src101.gif
[Mon Mar 12 20:34:21 2012] Mean detx,y = (8900.84, -9433.90) 
[Mon Mar 12 20:34:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 20:34:55 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 20:34:56 2012] Setting source spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Mon Mar 12 20:34:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Tue Mar 13 02:08:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 02:08:47 2012] rmf not generated due to insufficient counts
[Tue Mar 13 04:24:21 2012] Updating aperture counts using extracted products
[Tue Mar 13 04:24:21 2012] Error reading totcts from fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Tue Mar 13 04:24:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 04:24:40 2012] Using photon index=1.80, rate=0.00245, arf fullrun_pn_xmm0555660101_pi300-10000_pass1_cl_src101.arf
[Tue Mar 13 04:24:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 04:24:40 2012] Updating source flux to 5.5e-14
[Tue Mar 13 04:26:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting