[Mon Dec 19 23:23:28 2011] Detection parameters:
  Position = (328.7, 221.9) = 16 15 28.34 -22 49 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4322.7 +/- 82.7
  Background counts = 263.9
  Rate = 0.07 +/- 0.001

[Mon Dec 19 23:23:31 2011] Off-axis axis estimate = 5.97'
[Mon Dec 19 23:34:21 2011] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 23:34:21 2011] Initial guess for spatial extent in simple fitting = 9.41"
[Mon Dec 19 23:34:21 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.057
[Mon Dec 19 23:34:21 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.41"
[Tue Dec 20 02:39:57 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Dec 20 02:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src3.csv
[Tue Dec 20 02:39:57 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Dec 20 02:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src3.csv
[Tue Dec 20 02:39:57 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 02:39:58 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Dec 20 02:39:58 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Dec 20 02:39:58 2011] Fit fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Dec 20 06:26:41 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.262713 pixels away
[Tue Dec 20 06:26:41 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 06:26:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 06:26:41 2011] Assessing source extent using major
[Tue Dec 20 06:26:41 2011] Source does appear to be extended
[Tue Dec 20 06:26:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 06:27:35 2011] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 06:27:35 2011] Initial guess for spatial extent in simple fitting = 9.41"
[Tue Dec 20 06:27:35 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.057
[Tue Dec 20 06:27:35 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.41"
[Tue Dec 20 09:16:47 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Dec 20 09:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src3.csv
[Tue Dec 20 09:16:47 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Dec 20 09:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src3.csv
[Tue Dec 20 09:16:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 09:16:47 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Dec 20 09:16:48 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Dec 20 09:16:48 2011] Fit fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Dec 20 13:16:37 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.756120 pixels away
[Tue Dec 20 13:16:38 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 13:16:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 13:16:38 2011] Assessing source extent using major
[Tue Dec 20 13:16:38 2011] Source does appear to be extended
[Tue Dec 20 13:16:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 13:17:33 2011] Counts = 4322.747070, rescaling region sizes by 2.000000
[Tue Dec 20 13:17:33 2011] XMMSAS src. selection expression = ellipse(28544.492859, 19257.764572, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Dec 20 13:17:33 2011] Writing source region out to fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src3_src.reg
[Tue Dec 20 13:17:33 2011] Extracting stamp from image fullrun_pn_xmm0555650301_pi300-10000_cl_sm2.00.img.gz, (254, 147) - (404, 297)
[Tue Dec 20 13:17:33 2011] XMMSAS bgd. selection expression = annulus(28544.492859, 19257.764572, 4350.000000, 8700.000000, X, Y) && !ellipse(26795.315400, 27737.178200, 1421.253641, 1421.253641, 0.000000, X, Y) && !ellipse(21127.717636, 12039.491287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25310.168030, 12769.036255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23874.580800, 23402.635000, 344.868010, 344.868010, 0.000000, X, Y) && !ellipse(20200.892044, 23341.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.916992, 28494.719025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19348.238000, 12008.323000, 2070.952060, 2070.952060, 0.000000, X, Y) && !ellipse(32351.127838, 26828.181030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22355.075287, 26523.033203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26808.812592, 26501.731903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22672.237840, 25460.940400, 507.601615, 507.601615, 0.000000, X, Y) && !ellipse(27831.788000, 24902.806200, 571.597616, 294.724808, 280.667000, X, Y) && !ellipse(27381.345764, 24713.604187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25210.216797, 24584.657379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23084.940186, 13059.496460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27716.732560, 23013.634380, 1261.832036, 329.620809, 90.000000, X, Y) && !ellipse(26530.031000, 22556.142600, 514.560015, 514.560015, 0.000000, X, Y) && !ellipse(28908.685883, 13615.572433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26185.032043, 21442.739517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34756.172852, 20738.204926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28111.887857, 20830.268920, 1707.536049, 413.321240, 76.074827, X, Y) && !ellipse(29402.322205, 13620.797531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.052800, 19750.252800, 455.480813, 174.816805, 22.672600, X, Y) && !ellipse(32958.751400, 18571.475400, 521.392015, 521.392015, 0.000000, X, Y) && !ellipse(23390.075600, 18456.602400, 442.905613, 442.905613, 0.000000, X, Y) && !ellipse(28275.041321, 17501.206190, 400.907209, 259.715604, 341.798719, X, Y) && !ellipse(29074.010200, 16961.566800, 500.181614, 264.612008, 49.915700, X, Y) && !ellipse(30694.011400, 16408.343000, 385.328011, 247.247207, 344.010661, X, Y) && !ellipse(23795.522760, 16199.496200, 605.402417, 605.402417, 0.000000, X, Y) && !ellipse(29231.733917, 15020.668365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27387.332855, 14578.518372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20910.488449, 13906.829147, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 20 13:17:33 2011] Writing fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src3.gif
[Tue Dec 20 13:27:09 2011] Mean detx,y = (290.52, 8489.16) 
[Tue Dec 20 13:27:24 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 13:31:37 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 13:31:38 2011] Setting source spectrum file to fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Dec 20 13:31:38 2011] Setting bgd. spectrum file to fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Dec 20 16:30:03 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 20 16:30:03 2011] rmf not generated due to insufficient counts
[Tue Dec 20 23:04:43 2011] Updating aperture counts using extracted products
[Tue Dec 20 23:04:43 2011] Error reading totcts from fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Dec 20 23:04:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:04:48 2011] Using photon index=1.80, rate=0.0709, arf fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src3.arf
[Tue Dec 20 23:04:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:04:48 2011] Updating source flux to 2.4e-13
[Tue Dec 20 23:15:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting