[Mon Dec 19 23:23:28 2011] Detection parameters:
  Position = (197.4, 305.0) = 16 16 9.61 -22 43 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2012.8 +/- 56.2
  Background counts = 258.4
  Rate = 0.02 +/- 0.0005

[Mon Dec 19 23:23:31 2011] Off-axis axis estimate = 7.34'
[Mon Dec 19 23:34:21 2011] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 23:34:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 23:34:21 2011] Initial guess for spatial extent in simple fitting = 10.10"
[Mon Dec 19 23:34:21 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Mon Dec 19 23:34:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.10"
[Tue Dec 20 02:39:57 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 20 02:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 02:39:57 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 20 02:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 02:39:57 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 02:39:58 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 20 02:39:58 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 20 02:39:58 2011] Fit fullrun_pn_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 20 06:26:41 2011] Spatial fit model total counts = 4595.010000, observed total counts = 4595.000000
[Tue Dec 20 06:26:41 2011] Offset between fit and detection position for source 1 = 0.145275 pixels
[Tue Dec 20 06:26:41 2011] 4301.910000 total counts/ 2924.110000 bgd. counts: snr = 25.479408
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.145275 pixels
  Position = (197.6, 305.1) = 16 16 9.56 -22 43 43.9
  Extent = 5.5 (5.2-5.7)", rotation angle = 0
  Source counts = 1377.8 +/- 65.6
  Background counts = 2924.1
  Rate = 0.01 +/- 0.0007
[Tue Dec 20 06:26:41 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 06:26:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 06:26:41 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 06:26:41 2011] Source does appear to be extended
[Tue Dec 20 06:26:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 06:27:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 06:27:35 2011] Initial guess for spatial extent in simple fitting = 5.48"
[Tue Dec 20 06:27:35 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.970
[Tue Dec 20 06:27:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.48"
[Tue Dec 20 09:16:47 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 20 09:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 09:16:47 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 20 09:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 09:16:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 09:16:47 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 20 09:16:47 2011] fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 20 09:16:47 2011] Fit fullrun_pn_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 20 13:16:37 2011] Spatial fit model total counts = 3377.000000, observed total counts = 3377.000000
[Tue Dec 20 13:16:37 2011] Offset between fit and detection position for source 1 = 0.028734 pixels
[Tue Dec 20 13:16:37 2011] 3308.690000 total counts/ 1908.540000 bgd. counts: snr = 32.049697
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.028734 pixels
  Position = (197.6, 305.1) = 16 16 9.57 -22 43 44.0
  Extent = 5.5 (5.3-5.8)", rotation angle = 0
  Source counts = 1400.2 +/- 57.5
  Background counts = 1908.5
  Rate = 0.01 +/- 0.0006
[Tue Dec 20 13:16:38 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 13:16:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 13:16:38 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 13:16:38 2011] Source does appear to be extended
[Tue Dec 20 13:16:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 13:17:33 2011] Counts = 1400.150000, rescaling region sizes by 2.000000
[Tue Dec 20 13:17:33 2011] XMMSAS src. selection expression = ellipse(17138.692000, 26490.888200, 663.673219, 663.673219, 0.000000, X, Y)
[Tue Dec 20 13:17:33 2011] Writing source region out to fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1_src.reg
[Tue Dec 20 13:17:33 2011] Extracting stamp from image fullrun_pn_xmm0555650301_pi300-10000_cl_sm2.00.img.gz, (159, 267) - (236, 343)
[Tue Dec 20 13:17:33 2011] XMMSAS bgd. selection expression = annulus(17138.692000, 26490.888200, 2212.244064, 4424.488127, X, Y) && !ellipse(16225.873760, 25548.018800, 610.395218, 357.306410, 85.563790, X, Y) && !ellipse(18940.286400, 29583.005000, 531.685615, 350.692010, 93.493237, X, Y) && !ellipse(15994.323600, 28601.540000, 453.300013, 453.300013, 0.000000, X, Y) && !ellipse(19231.384200, 27858.113000, 355.113610, 355.113610, 0.000000, X, Y) && !ellipse(17347.090820, 25453.052400, 424.852812, 424.852812, 0.000000, X, Y) && !ellipse(20200.892044, 23341.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18254.705124, 22584.148560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21973.033829, 31512.080170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17161.253876, 28403.996674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22355.075287, 26523.033203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18550.914000, 23758.873000, 287.754408, 287.754408, 0.000000, X, Y) && !ellipse(17814.730927, 23962.698181, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 20 13:17:33 2011] Writing fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1.gif
[Tue Dec 20 13:18:56 2011] Mean detx,y = (-9591.84, -625.26) 
[Tue Dec 20 13:19:16 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 13:20:57 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 13:20:58 2011] Setting source spectrum file to fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 20 13:20:58 2011] Setting bgd. spectrum file to fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Dec 20 23:04:43 2011] Updating aperture counts using extracted products
[Tue Dec 20 23:04:43 2011] Error reading totcts from fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 20 23:04:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:04:48 2011] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1.arf
[Tue Dec 20 23:04:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:04:48 2011] Updating source flux to 7.8e-14
[Tue Dec 20 23:25:40 2011] Reading fit data from xmm0555650301/analysis//spectral/fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Dec 20 23:25:40 2011] Spectral fit parameter nH value = 8.55462e+21
[Tue Dec 20 23:25:40 2011] Spectral fit parameter PhoIndex value = 7.19032
[Tue Dec 20 23:25:40 2011] Failed to get F(0.3-8.0) from xmm0555650301/analysis//spectral/fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Dec 20 23:25:40 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:25:40 2011] Using Nh = 8.6e+21, photon index=7.19, rate=0.0149, arf fullrun_pn_xmm0555650301_pi300-10000_pass1_cl_src1.arf
[Tue Dec 20 23:25:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:25:40 2011] Updating source flux to 4.7e-14