[Mon Dec 19 23:25:21 2011] Detection parameters:
  Position = (369.6, 178.5) = 16 15 15.44 -22 52 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.1 +/- 16.8
  Background counts = 59.5
  Rate = 0.002 +/- 0.0003

[Mon Dec 19 23:25:21 2011] Off-axis axis estimate = 10.11'
[Tue Dec 20 04:27:28 2011] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 04:27:28 2011] Initial guess for spatial extent in simple fitting = 11.49"
[Tue Dec 20 04:27:28 2011] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.242
[Tue Dec 20 04:27:28 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 11.49"
[Tue Dec 20 06:26:19 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src27.ximg exists
[Tue Dec 20 06:26:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src27.csv
[Tue Dec 20 06:26:19 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Dec 20 06:26:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src27.csv
[Tue Dec 20 06:26:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Dec 20 06:26:20 2011] Fit fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Dec 20 06:27:08 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 15.001579 pixels away
[Tue Dec 20 06:27:08 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 06:27:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 06:27:08 2011] Assessing source extent using major
[Tue Dec 20 06:27:08 2011] Source does appear to be extended
[Tue Dec 20 06:27:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 11:25:28 2011] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 11:25:28 2011] Initial guess for spatial extent in simple fitting = 11.49"
[Tue Dec 20 11:25:28 2011] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.242
[Tue Dec 20 11:25:28 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 11.49"
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src26.ximg exists
[Tue Dec 20 13:16:13 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src26.csv
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Dec 20 13:16:13 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src26.csv
[Tue Dec 20 13:16:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 13:16:14 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Dec 20 13:16:14 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Dec 20 13:16:14 2011] Fit fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Dec 20 13:17:05 2011] Spatial fit model total counts = 659.999000, observed total counts = 660.000000
[Tue Dec 20 13:17:05 2011] Offset between fit and detection position for source 51 = 0.095551 pixels
[Tue Dec 20 13:17:05 2011] 660.899400 total counts/ 585.875000 bgd. counts: snr = 3.099560
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.095551 pixels
  Position = (369.5, 178.4) = 16 15 15.47 -22 52 54.9
  Extent = 6.8 (4.5-10.0)", rotation angle = 0
  Source counts = 75.0 +/- 25.7
  Background counts = 585.9
  Rate = 0.0007 +/- 0.0002
[Tue Dec 20 13:17:05 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 13:17:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 13:17:05 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 13:17:05 2011] Source does appear to be extended
[Tue Dec 20 13:17:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 20:56:44 2011] XMMSAS src. selection expression = ellipse(32101.812400, 15476.422000, 407.917212, 407.917212, 0.000000, X, Y)
[Tue Dec 20 20:56:44 2011] Writing source region out to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src51_src.reg
[Tue Dec 20 20:56:44 2011] Extracting stamp from image fullrun_mos2_xmm0555650301_pi300-10000_cl_sm2.00.img.gz, (346, 155) - (393, 202)
[Tue Dec 20 20:56:44 2011] XMMSAS bgd. selection expression = annulus(32101.812400, 15476.422000, 679.862020, 1359.724039, X, Y) && !ellipse(30664.722260, 16424.046494, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 20 20:56:44 2011] Writing fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src51.gif
[Tue Dec 20 21:25:18 2011] Mean detx,y = (-3126.53, -12987.44) 
[Tue Dec 20 21:25:21 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 21:25:37 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 21:25:37 2011] Setting source spectrum file to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue Dec 20 21:25:37 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Tue Dec 20 22:43:09 2011] Not generating rmf since there are only 75 counts
[Tue Dec 20 22:43:09 2011] rmf not generated due to insufficient counts
[Tue Dec 20 23:05:01 2011] Updating aperture counts using extracted products
[Tue Dec 20 23:05:01 2011] Error reading totcts from fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue Dec 20 23:05:04 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:05:04 2011] Using photon index=1.80, rate=0.000721, arf fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src51.arf
[Tue Dec 20 23:05:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:05:04 2011] Updating source flux to 1.7e-14
[Tue Dec 20 23:10:41 2011] Source 51 has fewer than 100.000000 counts, skipping spectral fitting