[Mon Dec 19 23:25:17 2011] Detection parameters:
  Position = (308.7, 319.2) = 16 15 34.64 -22 42 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17200.3 +/- 155.7
  Background counts = 73.5
  Rate = 0.2 +/- 0.002

[Mon Dec 19 23:25:21 2011] Off-axis axis estimate = 1.68'
[Tue Dec 20 04:27:28 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 04:27:28 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Dec 20 04:27:28 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Tue Dec 20 04:27:28 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Dec 20 06:26:19 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 20 06:26:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 06:26:19 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 20 06:26:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 06:26:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 20 06:26:20 2011] Fit fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 20 06:27:08 2011] Spatial fit model total counts = 15861.100000, observed total counts = 15864.000000
[Tue Dec 20 06:27:08 2011] Offset between fit and detection position for source 4 = 0.211280 pixels
[Tue Dec 20 06:27:08 2011] 15813.800000 total counts/ 3700.000000 bgd. counts: snr = 199.149645
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.211280 pixels
  Position = (308.5, 319.3) = 16 15 34.69 -22 42 42.1
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 12113.8 +/- 125.8
  Background counts = 3700.0
  Rate = 0.1 +/- 0.001
[Tue Dec 20 06:27:08 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 06:27:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 06:27:08 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 06:27:08 2011] Source does appear to be extended
[Tue Dec 20 06:27:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 11:25:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 11:25:28 2011] Initial guess for spatial extent in simple fitting = 5.51"
[Tue Dec 20 11:25:28 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.720
[Tue Dec 20 11:25:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.51"
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 20 13:16:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 20 13:16:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 13:16:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 20 13:16:13 2011] Fit fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 20 13:17:05 2011] Spatial fit model total counts = 15863.900000, observed total counts = 15864.000000
[Tue Dec 20 13:17:05 2011] Offset between fit and detection position for source 4 = 0.001688 pixels
[Tue Dec 20 13:17:05 2011] 15816.640000 total counts/ 3686.940000 bgd. counts: snr = 199.763908
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.001688 pixels
  Position = (308.5, 319.3) = 16 15 34.69 -22 42 42.1
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 12129.7 +/- 125.8
  Background counts = 3686.9
  Rate = 0.1 +/- 0.001
[Tue Dec 20 13:17:05 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 13:17:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 13:17:05 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 13:17:05 2011] Source does appear to be extended
[Tue Dec 20 13:17:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 20:56:43 2011] Counts = 12129.700000, rescaling region sizes by 3.000000
[Tue Dec 20 20:56:43 2011] XMMSAS src. selection expression = ellipse(26790.867000, 27733.018400, 990.437428, 990.437428, 0.000000, X, Y)
[Tue Dec 20 20:56:43 2011] Writing source region out to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4_src.reg
[Tue Dec 20 20:56:43 2011] Extracting stamp from image fullrun_mos2_xmm0555650301_pi300-10000_cl_sm2.00.img.gz, (252, 262) - (365, 376)
[Tue Dec 20 20:56:43 2011] XMMSAS bgd. selection expression = annulus(26790.867000, 27733.018400, 4952.187142, 9904.374285, X, Y) && !ellipse(16211.245895, 25525.490906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28561.583282, 19227.040573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28817.982000, 31617.212000, 467.998413, 467.998413, 0.000000, X, Y) && !ellipse(20219.580400, 23320.329600, 447.844813, 447.844813, 0.000000, X, Y) && !ellipse(31087.033140, 31445.120200, 334.459210, 334.459210, 0.000000, X, Y) && !ellipse(34323.567688, 35255.429871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23819.039400, 23394.035800, 296.877609, 296.877609, 0.000000, X, Y) && !ellipse(18277.285400, 22562.509760, 420.840812, 274.906408, 28.211119, X, Y) && !ellipse(25707.840000, 32188.166000, 271.000008, 271.000008, 0.000000, X, Y) && !ellipse(32354.151917, 26820.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17334.627289, 25454.699860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24731.950000, 36487.404000, 657.868019, 657.868019, 0.000000, X, Y) && !ellipse(17849.083023, 23881.379944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.993200, 29256.560000, 294.532008, 294.532008, 0.000000, X, Y) && !ellipse(19201.720886, 27867.439148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36173.199158, 28738.663116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.059300, 25444.241200, 323.916009, 323.916009, 0.000000, X, Y) && !ellipse(18627.203079, 34064.917389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25660.493835, 30198.164581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18947.001358, 29591.724030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26290.444672, 32562.659332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.503762, 22628.015200, 263.668008, 263.668008, 0.000000, X, Y) && !ellipse(27815.346000, 28709.148000, 385.535211, 385.535211, 0.000000, X, Y) && !ellipse(17309.546555, 24111.610809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28304.035584, 17452.980476, 388.427286, 201.798406, 350.147916, X, Y) && !ellipse(30253.251129, 37429.691772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18588.243700, 23738.948200, 527.293615, 527.293615, 0.000000, X, Y) && !ellipse(17144.026718, 28320.336700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17096.566742, 38246.625702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21967.573761, 31541.609406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29553.239380, 30864.409668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20497.738600, 22455.074600, 603.178417, 603.178417, 0.000000, X, Y) && !ellipse(26223.126000, 34951.870000, 1624.016047, 1624.016047, 0.000000, X, Y)
[Tue Dec 20 20:56:43 2011] Writing fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4.gif
[Tue Dec 20 20:57:08 2011] Mean detx,y = (31.66, 6.18) 
[Tue Dec 20 20:57:12 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 21:04:02 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 21:04:03 2011] Setting source spectrum file to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Dec 20 21:04:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Dec 20 23:04:59 2011] Updating aperture counts using extracted products
[Tue Dec 20 23:04:59 2011] Error reading totcts from fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Dec 20 23:05:02 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:05:02 2011] Using photon index=1.80, rate=0.117, arf fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4.arf
[Tue Dec 20 23:05:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:05:02 2011] Updating source flux to 1.2e-12
[Tue Dec 20 23:15:44 2011] Reading fit data from xmm0555650301/analysis//spectral/fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4_pl.csv
[Tue Dec 20 23:15:44 2011] Spectral fit parameter nH value = 3.61387e+21
[Tue Dec 20 23:15:44 2011] Spectral fit parameter PhoIndex value = 4.17638
[Tue Dec 20 23:15:44 2011] Failed to get F(0.3-8.0) from xmm0555650301/analysis//spectral/fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue Dec 20 23:15:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:15:44 2011] Using Nh = 3.6e+21, photon index=4.18, rate=0.117, arf fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src4.arf
[Tue Dec 20 23:15:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:15:44 2011] Updating source flux to 7.6e-13