[Mon Dec 19 23:25:20 2011] Detection parameters:
  Position = (287.0, 339.5) = 16 15 41.45 -22 41 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.1 +/- 15.0
  Background counts = 72.0
  Rate = 0.001 +/- 0.0002

[Mon Dec 19 23:25:21 2011] Off-axis axis estimate = 3.09'
[Tue Dec 20 04:27:28 2011] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 04:27:28 2011] Initial guess for spatial extent in simple fitting = 7.98"
[Tue Dec 20 04:27:28 2011] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.689
[Tue Dec 20 04:27:28 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 7.98"
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src47.ximg exists
[Tue Dec 20 06:26:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src47.csv
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src47_1.ximg exists
[Tue Dec 20 06:26:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src47.csv
[Tue Dec 20 06:26:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Tue Dec 20 06:26:20 2011] Fit fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Tue Dec 20 06:27:08 2011] Spatial fit model total counts = 974.133000, observed total counts = 971.000000
[Tue Dec 20 06:27:08 2011] Offset between fit and detection position for source 30 = 1.190966 pixels
[Tue Dec 20 06:27:08 2011] Warning, changing simple spatial fit ID from 47 to 25
[Tue Dec 20 06:27:08 2011] 971.967000 total counts/ 959.718000 bgd. counts: snr = 0.395393
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.190966 pixels
  Position = (287.7, 340.4) = 16 15 41.21 -22 41 10.3
  Extent = 2.3 (2.1-5.4)", rotation angle = 0
  Source counts = 12.2 +/- 31.2
  Background counts = 959.7
  Rate = 0.0001 +/- 0.0003
  Deleting source due to low Poisson probability