[Mon Dec 19 23:25:19 2011] Detection parameters:
  Position = (404.6, 149.8) = 16 15 4.43 -22 54 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.0 +/- 16.1
  Background counts = 46.9
  Rate = 0.0008 +/- 0.0002

[Mon Dec 19 23:25:21 2011] Off-axis axis estimate = 13.24'
[Tue Dec 20 04:27:28 2011] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 04:27:28 2011] Initial guess for spatial extent in simple fitting = 13.05"
[Tue Dec 20 04:27:28 2011] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.980
[Tue Dec 20 04:27:28 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 13.05"
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src49.ximg exists
[Tue Dec 20 06:26:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src49.csv
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue Dec 20 06:26:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src49.csv
[Tue Dec 20 06:26:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue Dec 20 06:26:20 2011] Fit fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Tue Dec 20 06:27:08 2011] Spatial fit model total counts = 630.100000, observed total counts = 636.000000
[Tue Dec 20 06:27:08 2011] Offset between fit and detection position for source 26 = 6.196094 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 6.196094 pixels
  Position = (408.7, 154.5) = 16 15 3.15 -22 54 38.9
  Extent = 25.8 (25.2-26.1)", rotation angle = 0
  Source counts = 574.0 +/- 24.0
  Background counts = 0.0
  Rate = 0.006 +/- 0.0002
 Deleting source due to low signal-to-noise ratio