[Mon Dec 19 23:25:19 2011] Detection parameters:
  Position = (232.7, 268.7) = 16 15 58.52 -22 46 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.9 +/- 23.3
  Background counts = 61.3
  Rate = 0.004 +/- 0.0003

[Mon Dec 19 23:25:21 2011] Off-axis axis estimate = 5.23'
[Tue Dec 20 04:27:28 2011] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 04:27:28 2011] Initial guess for spatial extent in simple fitting = 9.04"
[Tue Dec 20 04:27:28 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Tue Dec 20 04:27:28 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 9.04"
[Tue Dec 20 06:26:19 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src7.ximg exists
[Tue Dec 20 06:26:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src7.csv
[Tue Dec 20 06:26:19 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Dec 20 06:26:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src7.csv
[Tue Dec 20 06:26:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Dec 20 06:26:20 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Dec 20 06:26:20 2011] Fit fullrun_mos2_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Dec 20 06:27:08 2011] Warning, spatial fit 7 centroid is now closest to src. 43
[Tue Dec 20 06:27:08 2011] Source 19 is offset by -0.518136 and 1.758960 pixels which is larger than
2 X fitted extent = 1.364322 x 1.364322, not incorporating fit results
[Tue Dec 20 06:27:08 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 06:27:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 06:27:08 2011] Assessing source extent using major
[Tue Dec 20 06:27:08 2011] Source does appear to be extended
[Tue Dec 20 06:27:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 11:25:28 2011] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 11:25:28 2011] Initial guess for spatial extent in simple fitting = 9.04"
[Tue Dec 20 11:25:28 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Tue Dec 20 11:25:28 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 9.04"
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src6.ximg exists
[Tue Dec 20 13:16:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src6.csv
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Dec 20 13:16:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src6.csv
[Tue Dec 20 13:16:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Dec 20 13:16:13 2011] fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Dec 20 13:16:13 2011] Fit fullrun_mos2_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Dec 20 13:17:05 2011] Spatial fit model total counts = 765.829000, observed total counts = 766.000000
[Tue Dec 20 13:17:05 2011] Offset between fit and detection position for source 19 = 0.267604 pixels
[Tue Dec 20 13:17:05 2011] 754.945000 total counts/ 529.609000 bgd. counts: snr = 9.791583
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.267604 pixels
  Position = (233.0, 268.6) = 16 15 58.44 -22 46 22.7
  Extent = 5.6 (4.7-6.3)", rotation angle = 0
  Source counts = 225.3 +/- 27.5
  Background counts = 529.6
  Rate = 0.002 +/- 0.0003
[Tue Dec 20 13:17:05 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 13:17:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 13:17:05 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 13:17:05 2011] Source does appear to be extended
[Tue Dec 20 13:17:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 20:56:43 2011] XMMSAS src. selection expression = ellipse(20219.580400, 23320.329600, 335.883610, 335.883610, 0.000000, X, Y)
[Tue Dec 20 20:56:43 2011] Writing source region out to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src19_src.reg
[Tue Dec 20 20:56:43 2011] Extracting stamp from image fullrun_mos2_xmm0555650301_pi300-10000_cl_sm2.00.img.gz, (214, 249) - (252, 288)
[Tue Dec 20 20:56:43 2011] XMMSAS bgd. selection expression = annulus(20219.580400, 23320.329600, 559.806016, 1119.612032, X, Y) && !ellipse(18588.243700, 23738.948200, 527.293615, 527.293615, 0.000000, X, Y) && !ellipse(20497.738600, 22455.074600, 603.178417, 603.178417, 0.000000, X, Y)
[Tue Dec 20 20:56:43 2011] Writing fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src19.gif
[Tue Dec 20 21:12:48 2011] Mean detx,y = (7251.87, -3201.49) 
[Tue Dec 20 21:12:51 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 21:13:09 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 21:13:10 2011] Setting source spectrum file to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Dec 20 21:13:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Dec 20 23:04:59 2011] Updating aperture counts using extracted products
[Tue Dec 20 23:05:00 2011] Error reading totcts from fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Dec 20 23:05:02 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:05:02 2011] Using photon index=1.80, rate=0.00217, arf fullrun_mos2_xmm0555650301_pi300-10000_pass1_cl_src19.arf
[Tue Dec 20 23:05:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:05:02 2011] Updating source flux to 3.8e-14
[Tue Dec 20 23:10:41 2011] Flag b found in src. 19 procflags, skipping spectral fitting