[Mon Dec 19 23:24:19 2011] Detection parameters:
  Position = (320.3, 330.1) = 16 15 30.98 -22 41 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.7 +/- 21.8
  Background counts = 83.1
  Rate = 0.002 +/- 0.0002

[Mon Dec 19 23:24:19 2011] Off-axis axis estimate = 2.79'
[Tue Dec 20 02:39:59 2011] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 02:39:59 2011] Initial guess for spatial extent in simple fitting = 7.82"
[Tue Dec 20 02:39:59 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.946
[Tue Dec 20 02:39:59 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 7.82"
[Tue Dec 20 04:27:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src26.ximg exists
[Tue Dec 20 04:27:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Dec 20 04:27:27 2011] Fit fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src26 appears to have run properly
[Tue Dec 20 04:27:28 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Dec 20 04:27:28 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Dec 20 04:27:28 2011] Fit fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue Dec 20 06:26:54 2011] Spatial fit model total counts = 1426.010000, observed total counts = 1424.000000
[Tue Dec 20 06:26:54 2011] Offset between fit and detection position for source 38 = 9.543913 pixels
[Tue Dec 20 06:26:54 2011] 1409.639000 total counts/ 1124.720000 bgd. counts: snr = 8.495701
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 9.543913 pixels
  Position = (313.1, 323.8) = 16 15 33.23 -22 42 22.6
  Extent = 15.6 (15.6-31.3)", rotation angle = 0
  Source counts = 284.9 +/- 37.5
  Background counts = 1124.7
  Rate = 0.003 +/- 0.0004
[Tue Dec 20 06:26:54 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 06:26:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 06:26:54 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 06:26:54 2011] Source does appear to be extended
[Tue Dec 20 06:26:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 06:26:54 2011] Source is confused with source 3
[Tue Dec 20 09:16:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 09:16:48 2011] Initial guess for spatial extent in simple fitting = 15.65"
[Tue Dec 20 09:16:48 2011] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.953
[Tue Dec 20 09:16:48 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 15.65"
[Tue Dec 20 11:25:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src25.ximg exists
[Tue Dec 20 11:25:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src25.csv
[Tue Dec 20 11:25:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Dec 20 11:25:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src25.csv
[Tue Dec 20 11:25:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 11:25:28 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Dec 20 11:25:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue Dec 20 11:25:28 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Dec 20 11:25:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue Dec 20 11:25:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 13:16:51 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 20.318030 pixels away
[Tue Dec 20 13:16:51 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 13:16:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 13:16:51 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 13:16:51 2011] Source does appear to be extended
[Tue Dec 20 13:16:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 18:50:25 2011] XMMSAS src. selection expression = ellipse(27193.110000, 28122.624000, 938.814027, 938.814027, 0.000000, X, Y)
[Tue Dec 20 18:50:25 2011] Writing source region out to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src38_src.reg
[Tue Dec 20 18:50:25 2011] Extracting stamp from image fullrun_mos1_xmm0555650301_pi300-10000_cl_sm2.00.img.gz, (259, 270) - (367, 378)
[Tue Dec 20 18:50:25 2011] XMMSAS bgd. selection expression = annulus(27193.110000, 28122.624000, 1564.690045, 3129.380090, X, Y) && !ellipse(26793.132400, 27728.266600, 1314.568838, 1314.568838, 0.000000, X, Y) && !ellipse(28777.435800, 31602.684000, 413.960812, 326.803209, 6.471000, X, Y) && !ellipse(31090.493378, 31484.913910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.084600, 30236.934800, 348.476010, 348.476010, 0.000000, X, Y) && !ellipse(30052.693276, 29256.191000, 365.507461, 365.507461, 0.000000, X, Y)
[Tue Dec 20 18:50:25 2011] Writing fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src38.gif
[Tue Dec 20 19:15:54 2011] Mean detx,y = (271.78, -109.75) 
[Tue Dec 20 19:15:58 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 19:16:14 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 19:16:15 2011] Setting source spectrum file to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Dec 20 19:16:15 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Dec 20 23:04:54 2011] Updating aperture counts using extracted products
[Tue Dec 20 23:04:54 2011] Error reading totcts from fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Dec 20 23:04:56 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:04:56 2011] Using photon index=1.80, rate=0.00274, arf fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src38.arf
[Tue Dec 20 23:04:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:04:57 2011] Updating source flux to 2.6e-14
[Tue Dec 20 23:05:08 2011] Flag c found in src. 38 procflags, skipping spectral fitting