[Mon Dec 19 23:24:17 2011] Detection parameters:
  Position = (308.7, 319.2) = 16 15 34.62 -22 42 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17983.0 +/- 161.1
  Background counts = 82.3
  Rate = 0.2 +/- 0.002

[Mon Dec 19 23:24:19 2011] Off-axis axis estimate = 1.68'
[Tue Dec 20 02:39:59 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 02:39:59 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Dec 20 02:39:59 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Tue Dec 20 02:39:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Dec 20 04:27:26 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 20 04:27:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 04:27:26 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 20 04:27:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src1.csv
[Tue Dec 20 04:27:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 04:27:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 20 04:27:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 20 04:27:27 2011] Fit fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 20 06:26:54 2011] Spatial fit model total counts = 16264.800000, observed total counts = 16290.000000
[Tue Dec 20 06:26:54 2011] Offset between fit and detection position for source 3 = 0.194300 pixels
[Tue Dec 20 06:26:54 2011] 16268.280000 total counts/ 3984.180000 bgd. counts: snr = 194.613905
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.194300 pixels
  Position = (308.5, 319.3) = 16 15 34.68 -22 42 42.4
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 12284.1 +/- 127.5
  Background counts = 3984.2
  Rate = 0.1 +/- 0.001
[Tue Dec 20 06:26:54 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 06:26:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 06:26:54 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 06:26:54 2011] Source does appear to be extended
[Tue Dec 20 06:26:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 06:26:54 2011] Source is confused with source 38
[Tue Dec 20 09:16:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 09:16:48 2011] Initial guess for spatial extent in simple fitting = 5.52"
[Tue Dec 20 09:16:48 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.719
[Tue Dec 20 09:16:48 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.52"
[Tue Dec 20 11:25:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 20 11:25:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 11:25:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 20 11:25:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 11:25:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 11:25:28 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 20 11:25:28 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 20 11:25:28 2011] Fit fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 20 13:16:51 2011] Spatial fit model total counts = 16261.900000, observed total counts = 16264.000000
[Tue Dec 20 13:16:51 2011] Offset between fit and detection position for source 3 = 0.011493 pixels
[Tue Dec 20 13:16:51 2011] 16219.580000 total counts/ 3983.580000 bgd. counts: snr = 193.866467
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.011493 pixels
  Position = (308.5, 319.3) = 16 15 34.68 -22 42 42.4
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 12236.0 +/- 127.4
  Background counts = 3983.6
  Rate = 0.1 +/- 0.001
[Tue Dec 20 13:16:51 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 13:16:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 13:16:51 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 13:16:51 2011] Source does appear to be extended
[Tue Dec 20 13:16:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 18:50:24 2011] Counts = 12236.000000, rescaling region sizes by 3.000000
[Tue Dec 20 18:50:24 2011] XMMSAS src. selection expression = ellipse(26793.132400, 27728.266600, 985.926628, 985.926628, 0.000000, X, Y)
[Tue Dec 20 18:50:24 2011] Writing source region out to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3_src.reg
[Tue Dec 20 18:50:24 2011] Extracting stamp from image fullrun_mos1_xmm0555650301_pi300-10000_cl_sm2.00.img.gz, (252, 263) - (365, 376)
[Tue Dec 20 18:50:24 2011] XMMSAS bgd. selection expression = annulus(26793.132400, 27728.266600, 4929.633142, 9859.266284, X, Y) && !ellipse(16206.446930, 25492.765015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17141.553558, 26487.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28777.435800, 31602.684000, 413.960812, 326.803209, 6.471000, X, Y) && !ellipse(24722.458710, 36493.488617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31090.493378, 31484.913910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18925.072144, 29612.611145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20206.547200, 23328.131200, 539.539216, 539.539216, 0.000000, X, Y) && !ellipse(23848.746979, 23392.549225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34240.162000, 35214.260200, 335.268010, 335.268010, 0.000000, X, Y) && !ellipse(25698.936005, 32175.545441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32336.881200, 26802.177600, 350.139492, 350.139492, 0.000000, X, Y) && !ellipse(36191.646301, 28731.823761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18264.057400, 22521.664400, 508.660815, 508.660815, 0.000000, X, Y) && !ellipse(19236.096400, 27862.010200, 460.516813, 293.229608, 55.923142, X, Y) && !ellipse(22665.408160, 25464.921000, 456.144813, 456.144813, 0.000000, X, Y) && !ellipse(25658.084600, 30236.934800, 348.476010, 348.476010, 0.000000, X, Y) && !ellipse(17814.940000, 23885.534000, 1607.096046, 1607.096046, 0.000000, X, Y) && !ellipse(30052.693276, 29256.191000, 365.507461, 365.507461, 0.000000, X, Y) && !ellipse(26222.200820, 21426.169800, 774.258422, 361.108010, 322.995045, X, Y) && !ellipse(27193.110000, 28122.624000, 1251.752036, 1251.752036, 0.000000, X, Y) && !ellipse(26497.009500, 22590.451000, 400.096012, 400.096012, 0.000000, X, Y) && !ellipse(17176.453918, 28367.808624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30341.891400, 37469.210400, 457.672375, 457.672375, 0.000000, X, Y) && !ellipse(17071.516541, 38205.878967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.160400, 23728.702000, 764.997622, 764.997622, 0.000000, X, Y) && !ellipse(35089.248932, 34064.033264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17328.626200, 25493.147000, 688.320020, 688.320020, 0.000000, X, Y) && !ellipse(18550.478043, 33944.888824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36786.564026, 30090.378357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22306.380800, 26527.581400, 699.300820, 699.300820, 0.000000, X, Y) && !ellipse(17623.968000, 23981.130200, 1607.096046, 331.454410, 28.610100, X, Y)
[Tue Dec 20 18:50:24 2011] Writing fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3.gif
[Tue Dec 20 18:50:43 2011] Mean detx,y = (221.58, -182.05) 
[Tue Dec 20 18:50:47 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 18:57:21 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 18:57:22 2011] Setting source spectrum file to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Dec 20 18:57:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Dec 20 23:04:53 2011] Updating aperture counts using extracted products
[Tue Dec 20 23:04:53 2011] Error reading totcts from fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Dec 20 23:04:55 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:04:55 2011] Using photon index=1.80, rate=0.118, arf fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3.arf
[Tue Dec 20 23:04:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:04:55 2011] Updating source flux to 1.1e-12
[Tue Dec 20 23:05:08 2011] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue Dec 20 23:10:41 2011] Reading fit data from xmm0555650301/analysis//spectral/fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3_pl.csv
[Tue Dec 20 23:10:41 2011] Spectral fit parameter nH value = 3.65959e+21
[Tue Dec 20 23:10:41 2011] Spectral fit parameter PhoIndex value = 4.2644
[Tue Dec 20 23:10:41 2011] Failed to get F(0.3-8.0) from xmm0555650301/analysis//spectral/fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Dec 20 23:10:41 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:10:41 2011] Using Nh = 3.7e+21, photon index=4.26, rate=0.118, arf fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src3.arf
[Tue Dec 20 23:10:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:10:41 2011] Updating source flux to 7.1e-13