[Mon Dec 19 23:24:17 2011] Detection parameters:
  Position = (186.8, 293.6) = 16 16 12.94 -22 44 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1852.2 +/- 52.4
  Background counts = 62.5
  Rate = 0.02 +/- 0.0005

[Mon Dec 19 23:24:19 2011] Off-axis axis estimate = 8.10'
[Tue Dec 20 02:39:59 2011] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 02:39:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 02:39:59 2011] Initial guess for spatial extent in simple fitting = 10.48"
[Tue Dec 20 02:39:59 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.886
[Tue Dec 20 02:39:59 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.48"
[Tue Dec 20 04:27:26 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Dec 20 04:27:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src2.csv
[Tue Dec 20 04:27:26 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Dec 20 04:27:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src2.csv
[Tue Dec 20 04:27:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 04:27:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Dec 20 04:27:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Dec 20 04:27:27 2011] Fit fullrun_mos1_xmm0555650301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Dec 20 06:26:54 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.816190 pixels away
[Tue Dec 20 06:26:54 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 06:26:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 06:26:54 2011] Assessing source extent using major
[Tue Dec 20 06:26:54 2011] Source does appear to be extended
[Tue Dec 20 06:26:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 09:16:48 2011] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 09:16:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 09:16:48 2011] Initial guess for spatial extent in simple fitting = 10.48"
[Tue Dec 20 09:16:48 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.886
[Tue Dec 20 09:16:48 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.48"
[Tue Dec 20 11:25:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Dec 20 11:25:27 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Dec 20 11:25:27 2011] Fit fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Dec 20 11:25:28 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Dec 20 11:25:28 2011] fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Dec 20 11:25:28 2011] Fit fullrun_mos1_xmm0555650301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Dec 20 13:16:51 2011] Warning, spatial fit 2 centroid is now closest to src. 41
[Tue Dec 20 13:16:51 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 13:16:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 13:16:51 2011] Assessing source extent using major
[Tue Dec 20 13:16:51 2011] Source does appear to be extended
[Tue Dec 20 13:16:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 18:50:24 2011] Counts = 1852.217285, rescaling region sizes by 2.000000
[Tue Dec 20 18:50:24 2011] XMMSAS src. selection expression = ellipse(16206.446930, 25492.765015, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Dec 20 18:50:24 2011] Writing source region out to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src2_src.reg
[Tue Dec 20 18:50:24 2011] Extracting stamp from image fullrun_mos1_xmm0555650301_pi300-10000_cl_sm2.00.img.gz, (112, 219) - (262, 369)
[Tue Dec 20 18:50:24 2011] XMMSAS bgd. selection expression = annulus(16206.446930, 25492.765015, 4350.000000, 8700.000000, X, Y) && !ellipse(17141.553558, 26487.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18925.072144, 29612.611145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20206.547200, 23328.131200, 539.539216, 539.539216, 0.000000, X, Y) && !ellipse(23848.746979, 23392.549225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25698.936005, 32175.545441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18264.057400, 22521.664400, 508.660815, 508.660815, 0.000000, X, Y) && !ellipse(19236.096400, 27862.010200, 460.516813, 293.229608, 55.923142, X, Y) && !ellipse(22665.408160, 25464.921000, 456.144813, 456.144813, 0.000000, X, Y) && !ellipse(17814.940000, 23885.534000, 1607.096046, 1607.096046, 0.000000, X, Y) && !ellipse(17176.453918, 28367.808624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15268.073288, 34941.791260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.160400, 23728.702000, 764.997622, 764.997622, 0.000000, X, Y) && !ellipse(15995.601761, 28573.060974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17328.626200, 25493.147000, 688.320020, 688.320020, 0.000000, X, Y) && !ellipse(18550.478043, 33944.888824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22306.380800, 26527.581400, 699.300820, 699.300820, 0.000000, X, Y) && !ellipse(17623.968000, 23981.130200, 1607.096046, 331.454410, 28.610100, X, Y)
[Tue Dec 20 18:50:24 2011] Writing fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src2.gif
[Tue Dec 20 18:57:43 2011] Mean detx,y = (-77.57, -10934.27) 
[Tue Dec 20 18:57:47 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 19:01:28 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 19:01:28 2011] Setting source spectrum file to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Dec 20 19:01:28 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Dec 20 19:36:21 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 20 19:36:21 2011] rmf not generated due to insufficient counts
[Tue Dec 20 23:04:53 2011] Updating aperture counts using extracted products
[Tue Dec 20 23:04:53 2011] Error reading totcts from fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Dec 20 23:04:55 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 23:04:55 2011] Using photon index=1.80, rate=0.0176, arf fullrun_mos1_xmm0555650301_pi300-10000_pass1_cl_src2.arf
[Tue Dec 20 23:04:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 23:04:55 2011] Updating source flux to 3.2e-13
[Tue Dec 20 23:05:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting