[Sun Feb 19 04:34:26 2012] Detection parameters:
  Position = (160.0, 464.0) = 16 16 21.45 -22 32 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.0 +/- 23.8
  Background counts = 112.0
  Rate = 0.002 +/- 0.0002

[Sun Feb 19 04:34:28 2012] Off-axis axis estimate = 15.64'
[Sun Feb 19 04:39:48 2012] Using EEF radius (= 14.25 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 04:39:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 04:39:48 2012] Initial guess for spatial extent in simple fitting = 14.25"
[Sun Feb 19 04:39:48 2012] source mask rpix=3.3, npix_max = 57, mask sum = 57, frac = 1.000
[Sun Feb 19 04:39:48 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 14.25"
[Sun Feb 19 06:54:14 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src6.ximg exists
[Sun Feb 19 06:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src6.csv
[Sun Feb 19 06:54:14 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Feb 19 06:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src6.csv
[Sun Feb 19 06:54:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 06:54:15 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Feb 19 06:54:15 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Feb 19 06:54:15 2012] Fit fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Feb 19 09:51:56 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.161486 pixels away
[Sun Feb 19 09:51:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 09:51:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 09:51:56 2012] Assessing source extent using major
[Sun Feb 19 09:51:56 2012] Source does appear to be extended
[Sun Feb 19 09:51:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 09:52:35 2012] Using EEF radius (= 14.25 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 09:52:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 09:52:35 2012] Initial guess for spatial extent in simple fitting = 14.25"
[Sun Feb 19 09:52:35 2012] source mask rpix=3.3, npix_max = 57, mask sum = 57, frac = 1.000
[Sun Feb 19 09:52:35 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.25"
[Sun Feb 19 12:48:58 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src6.ximg exists
[Sun Feb 19 12:48:58 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Feb 19 12:48:58 2012] Fit fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Feb 19 12:48:59 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Feb 19 12:48:59 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Feb 19 12:48:59 2012] Fit fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Feb 19 17:53:09 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.022333 pixels away
[Sun Feb 19 17:53:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 17:53:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 17:53:09 2012] Assessing source extent using major
[Sun Feb 19 17:53:09 2012] Source does appear to be extended
[Sun Feb 19 17:53:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 17:53:58 2012] XMMSAS src. selection expression = ellipse(13875.771942, 40315.451080, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 19 17:53:58 2012] Writing source region out to fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src6_src.reg
[Sun Feb 19 17:53:58 2012] Extracting stamp from image fullrun_pn_xmm0555650201_pi300-10000_cl_sm2.00.img.gz, (123, 426) - (198, 501)
[Sun Feb 19 17:53:58 2012] XMMSAS bgd. selection expression = annulus(13875.771942, 40315.451080, 1087.500000, 2175.000000, X, Y)
[Sun Feb 19 17:53:58 2012] Writing fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src6.gif
[Sun Feb 19 18:15:44 2012] Mean detx,y = (-10255.03, -14848.05) 
[Sun Feb 19 18:15:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 18:16:12 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 18:16:13 2012] Setting source spectrum file to fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 19 18:16:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Feb 19 20:50:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 19 20:50:44 2012] rmf not generated due to insufficient counts
[Mon Feb 20 03:09:44 2012] Updating aperture counts using extracted products
[Mon Feb 20 03:09:44 2012] Error reading totcts from fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Feb 20 03:09:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 03:09:45 2012] Using photon index=1.80, rate=0.00234, arf fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src6.arf
[Mon Feb 20 03:09:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 03:09:45 2012] Updating source flux to 2.4e-14
[Mon Feb 20 03:17:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting