[Sun Feb 19 04:34:27 2012] Detection parameters:
  Position = (292.8, 332.4) = 16 15 39.77 -22 41 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.4 +/- 21.4
  Background counts = 177.7
  Rate = 0.001 +/- 0.0003

[Sun Feb 19 04:34:28 2012] Off-axis axis estimate = 2.49'
[Sun Feb 19 04:39:48 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 04:39:48 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Feb 19 04:39:48 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.926
[Sun Feb 19 04:39:48 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.68"
[Sun Feb 19 06:54:15 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src30.ximg exists
[Sun Feb 19 06:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src30.csv
[Sun Feb 19 06:54:15 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Feb 19 06:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src30.csv
[Sun Feb 19 06:54:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 06:54:16 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Feb 19 06:54:16 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Feb 19 06:54:16 2012] Fit fullrun_pn_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Feb 19 09:51:56 2012] Warning, spatial fit 30 centroid is now closest to src. 29
[Sun Feb 19 09:51:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 09:51:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 09:51:56 2012] Assessing source extent using major
[Sun Feb 19 09:51:56 2012] Source does appear to be extended
[Sun Feb 19 09:51:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 09:51:56 2012] Source is confused with source 29
[Sun Feb 19 09:52:35 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 09:52:35 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Feb 19 09:52:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.926
[Sun Feb 19 09:52:35 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.68"
[Sun Feb 19 12:48:58 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src27.ximg exists
[Sun Feb 19 12:48:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src27.csv
[Sun Feb 19 12:48:58 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Feb 19 12:48:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src27.csv
[Sun Feb 19 12:48:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 12:48:59 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Feb 19 12:48:59 2012] fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Feb 19 12:48:59 2012] Fit fullrun_pn_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Feb 19 17:53:09 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 13.584081 pixels away
[Sun Feb 19 17:53:09 2012] Spatial fit model total counts = 1994.320000, observed total counts = 1989.000000
[Sun Feb 19 17:53:09 2012] Offset between fit and detection position for source 32 = 8.173927 pixels
[Sun Feb 19 17:53:09 2012] 2041.265000 total counts/ 1740.560000 bgd. counts: snr = 7.207691
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 8.173927 pixels
  Position = (297.8, 325.9) = 16 15 38.19 -22 42 11.2
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 300.7 +/- 45.2
  Background counts = 1740.6
  Rate = 0.003 +/- 0.0005
[Sun Feb 19 17:53:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 17:53:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 17:53:09 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 17:53:09 2012] Source does appear to be extended
[Sun Feb 19 17:53:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 17:53:58 2012] XMMSAS src. selection expression = ellipse(25863.384000, 28308.456000, 921.066027, 921.066027, 0.000000, X, Y)
[Sun Feb 19 17:53:58 2012] Writing source region out to fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src32_src.reg
[Sun Feb 19 17:53:58 2012] Extracting stamp from image fullrun_pn_xmm0555650201_pi300-10000_cl_sm2.00.img.gz, (245, 273) - (351, 379)
[Sun Feb 19 17:53:58 2012] XMMSAS bgd. selection expression = annulus(25863.384000, 28308.456000, 1535.110044, 3070.220088, X, Y) && !ellipse(26836.558200, 27695.062920, 1412.815241, 1412.815241, 0.000000, X, Y) && !ellipse(28797.965600, 31567.257000, 435.761613, 435.761613, 0.000000, X, Y) && !ellipse(29398.634369, 30821.472534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25009.934000, 29193.308000, 1228.088035, 1228.088035, 0.000000, X, Y) && !ellipse(27456.120600, 29261.611000, 618.900818, 618.900818, 0.000000, X, Y) && !ellipse(27853.348907, 28515.364532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22451.954400, 26556.559480, 891.048026, 891.048026, 0.000000, X, Y) && !ellipse(27210.411200, 25627.568000, 1114.456032, 1114.456032, 0.000000, X, Y) && !ellipse(22704.998600, 25405.673000, 486.712814, 486.712814, 0.000000, X, Y) && !ellipse(27416.854126, 24484.913239, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 19 17:53:58 2012] Writing fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src32.gif
[Sun Feb 19 18:48:23 2012] Mean detx,y = (-400.23, -600.14) 
[Sun Feb 19 18:48:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 18:49:18 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 18:49:19 2012] Setting source spectrum file to fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Feb 19 18:49:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Feb 20 03:09:44 2012] Updating aperture counts using extracted products
[Mon Feb 20 03:09:44 2012] Error reading totcts from fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Feb 20 03:09:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 03:09:47 2012] Using photon index=1.80, rate=0.00312, arf fullrun_pn_xmm0555650201_pi300-10000_pass1_cl_src32.arf
[Mon Feb 20 03:09:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 03:09:47 2012] Updating source flux to 9.4e-15
[Mon Feb 20 03:17:43 2012] Flag c found in src. 32 procflags, skipping spectral fitting