[Sun Feb 19 04:34:32 2012] Detection parameters:
  Position = (309.2, 318.9) = 16 15 34.63 -22 42 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17328.7 +/- 156.0
  Background counts = 54.0
  Rate = 0.2 +/- 0.002

[Sun Feb 19 04:34:34 2012] Off-axis axis estimate = 1.67'
[Sun Feb 19 08:14:18 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 08:14:18 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Feb 19 08:14:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sun Feb 19 08:14:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Feb 19 09:51:41 2012] fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 19 09:51:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 19 09:51:41 2012] fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 19 09:51:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 19 09:51:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 09:51:42 2012] fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 19 09:51:42 2012] fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 19 09:51:42 2012] Fit fullrun_mos2_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 19 09:52:16 2012] Spatial fit model total counts = 15883.400000, observed total counts = 15858.000000
[Sun Feb 19 09:52:16 2012] Offset between fit and detection position for source 4 = 0.164887 pixels
[Sun Feb 19 09:52:16 2012] 15787.740000 total counts/ 3551.640000 bgd. counts: snr = 205.318720
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.164887 pixels
  Position = (309.0, 318.8) = 16 15 34.67 -22 42 42.2
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 12236.1 +/- 125.6
  Background counts = 3551.6
  Rate = 0.1 +/- 0.001
[Sun Feb 19 09:52:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 09:52:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 09:52:16 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 09:52:16 2012] Source does appear to be extended
[Sun Feb 19 09:52:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 15:12:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 15:12:58 2012] Initial guess for spatial extent in simple fitting = 5.55"
[Sun Feb 19 15:12:58 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.267
[Sun Feb 19 15:12:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.55"
[Sun Feb 19 17:52:42 2012] fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 19 17:52:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 17:52:42 2012] fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 19 17:52:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 17:52:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 17:52:43 2012] fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 17:52:43 2012] fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 17:52:43 2012] Fit fullrun_mos2_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 19 17:53:30 2012] Spatial fit model total counts = 15864.900000, observed total counts = 15865.000000
[Sun Feb 19 17:53:30 2012] Offset between fit and detection position for source 4 = 0.011039 pixels
[Sun Feb 19 17:53:30 2012] 15826.040000 total counts/ 3558.940000 bgd. counts: snr = 205.627679
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.011039 pixels
  Position = (309.0, 318.8) = 16 15 34.67 -22 42 42.3
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 12267.1 +/- 125.8
  Background counts = 3558.9
  Rate = 0.1 +/- 0.001
[Sun Feb 19 17:53:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 17:53:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 17:53:30 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 17:53:30 2012] Source does appear to be extended
[Sun Feb 19 17:53:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 01:04:08 2012] Counts = 12267.100000, rescaling region sizes by 3.000000
[Mon Feb 20 01:04:08 2012] XMMSAS src. selection expression = ellipse(26836.334306, 27686.241260, 1003.687229, 1003.687229, 0.000000, X, Y)
[Mon Feb 20 01:04:08 2012] Writing source region out to fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4_src.reg
[Mon Feb 20 01:04:08 2012] Extracting stamp from image fullrun_mos2_xmm0555650201_pi300-10000_cl_sm2.00.img.gz, (251, 261) - (367, 376)
[Mon Feb 20 01:04:08 2012] XMMSAS bgd. selection expression = annulus(26836.334306, 27686.241260, 5018.436144, 10036.872289, X, Y) && !ellipse(28660.984848, 19201.852800, 503.116014, 503.116014, 0.000000, X, Y) && !ellipse(17162.426071, 26413.170746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28824.022308, 31558.086517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18953.976800, 29487.184400, 504.836015, 504.836015, 0.000000, X, Y) && !ellipse(24747.887398, 36454.826200, 512.538415, 512.538415, 0.000000, X, Y) && !ellipse(31134.296051, 31374.661163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20271.477600, 23253.756400, 523.648815, 523.648815, 0.000000, X, Y) && !ellipse(32390.814600, 26753.753400, 425.959212, 297.540009, 47.551906, X, Y) && !ellipse(17371.752200, 25402.797200, 320.865609, 320.865609, 0.000000, X, Y) && !ellipse(34370.513916, 35197.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23863.878080, 23371.834200, 321.826409, 321.826409, 0.000000, X, Y) && !ellipse(25622.484480, 30136.318600, 700.752820, 700.752820, 0.000000, X, Y) && !ellipse(18284.444107, 22555.325562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25737.154000, 32141.660000, 265.515208, 265.515208, 0.000000, X, Y) && !ellipse(22693.287000, 25407.306800, 403.415212, 403.415212, 0.000000, X, Y) && !ellipse(36221.275600, 28676.843600, 293.825608, 293.825608, 0.000000, X, Y) && !ellipse(30076.538200, 29201.896600, 349.573610, 349.573610, 0.000000, X, Y) && !ellipse(19242.401245, 27790.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16030.541946, 28543.677765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28345.601959, 17433.220474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.407410, 32487.516693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17883.536011, 23834.962067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27869.371020, 28683.821400, 403.726412, 403.726412, 0.000000, X, Y) && !ellipse(20406.708200, 20125.049600, 386.920811, 386.920811, 0.000000, X, Y) && !ellipse(17415.252000, 24055.386400, 1581.712046, 1581.712046, 0.000000, X, Y) && !ellipse(32431.291138, 37904.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.028931, 22552.123596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17116.995865, 38167.590790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18641.244202, 34032.188843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18244.694000, 23554.176000, 1581.712046, 1581.712046, 0.000000, X, Y) && !ellipse(35003.602176, 34057.659007, 453.902767, 286.924492, 5.054471, X, Y) && !ellipse(32929.540600, 18536.085800, 826.352024, 207.882406, 0.000000, X, Y) && !ellipse(24952.674000, 29447.250000, 807.760023, 807.760023, 0.000000, X, Y) && !ellipse(22033.969360, 31525.106400, 384.473611, 384.473611, 0.000000, X, Y) && !ellipse(29579.877400, 30768.911600, 317.618409, 317.618409, 0.000000, X, Y) && !ellipse(25939.009064, 34573.358154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26236.721780, 21392.030400, 526.277615, 294.065608, 355.688000, X, Y) && !ellipse(27585.098022, 27207.967041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35811.440796, 28332.156891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.316040, 23840.888092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.412567, 28785.866882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28272.282000, 35489.434000, 1261.936036, 1261.936036, 0.000000, X, Y) && !ellipse(17677.286000, 35131.602200, 1833.600053, 1833.600053, 0.000000, X, Y)
[Mon Feb 20 01:04:08 2012] Writing fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4.gif
[Mon Feb 20 01:04:30 2012] Mean detx,y = (-4.99, -41.63) 
[Mon Feb 20 01:04:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 01:09:48 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 01:09:48 2012] Setting source spectrum file to fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Feb 20 01:09:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Feb 20 03:09:52 2012] Updating aperture counts using extracted products
[Mon Feb 20 03:09:52 2012] Error reading totcts from fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Feb 20 03:09:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 03:09:55 2012] Using photon index=1.80, rate=0.118, arf fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4.arf
[Mon Feb 20 03:09:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 03:09:55 2012] Updating source flux to 1.2e-12
[Mon Feb 20 03:17:43 2012] Reading fit data from xmm0555650201/analysis//spectral/fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4_pl.csv
[Mon Feb 20 03:17:43 2012] Spectral fit parameter nH value = 3.99037e+21
[Mon Feb 20 03:17:43 2012] Spectral fit parameter PhoIndex value = 4.44769
[Mon Feb 20 03:17:43 2012] Failed to get F(0.3-8.0) from xmm0555650201/analysis//spectral/fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Mon Feb 20 03:17:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 03:17:43 2012] Using Nh = 4e+21, photon index=4.45, rate=0.118, arf fullrun_mos2_xmm0555650201_pi300-10000_pass1_cl_src4.arf
[Mon Feb 20 03:17:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 03:17:43 2012] Updating source flux to 7.5e-13