[Sun Feb 19 04:34:31 2012] Detection parameters:
  Position = (206.1, 274.6) = 16 16 7.05 -22 45 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.5 +/- 13.7
  Background counts = 49.2
  Rate = 0.001 +/- 0.0002

[Sun Feb 19 04:34:31 2012] Off-axis axis estimate = 6.92'
[Sun Feb 19 06:54:17 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 06:54:17 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Sun Feb 19 06:54:17 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.976
[Sun Feb 19 06:54:17 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.89"
[Sun Feb 19 08:14:17 2012] fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_src35.ximg exists
[Sun Feb 19 08:14:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_src35.csv
[Sun Feb 19 08:14:17 2012] fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_src35_1.ximg exists
[Sun Feb 19 08:14:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_src35.csv
[Sun Feb 19 08:14:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 08:14:18 2012] fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sun Feb 19 08:14:18 2012] fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sun Feb 19 08:14:18 2012] Fit fullrun_mos1_xmm0555650201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sun Feb 19 09:52:05 2012] Warning, spatial fit 35 centroid is now closest to src. 46
[Sun Feb 19 09:52:05 2012] Spatial fit model total counts = 615.815000, observed total counts = 616.000000
[Sun Feb 19 09:52:05 2012] Offset between fit and detection position for source 49 = 2.395904 pixels
[Sun Feb 19 09:52:05 2012] Warning, changing simple spatial fit ID from 35 to 44
[Sun Feb 19 09:52:05 2012] 604.950000 total counts/ 242.301000 bgd. counts: snr = 23.297476
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 2.395904 pixels
  Position = (203.7, 275.2) = 16 16 7.78 -22 45 51.8
  Extent = 20.1 (20.0-40.1)", rotation angle = 0
  Source counts = 362.6 +/- 24.6
  Background counts = 242.3
  Rate = 0.003 +/- 0.0002
[Sun Feb 19 09:52:05 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 09:52:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 09:52:05 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 09:52:05 2012] Source does appear to be extended
[Sun Feb 19 09:52:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 09:52:05 2012] Source is confused with source 50
[Sun Feb 19 12:49:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 12:49:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 12:49:00 2012] Initial guess for spatial extent in simple fitting = 20.07"
[Sun Feb 19 12:49:00 2012] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.956
[Sun Feb 19 12:49:00 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 20.07"
[Sun Feb 19 15:12:57 2012] fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_src35.ximg exists
[Sun Feb 19 15:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_src35.csv
[Sun Feb 19 15:12:57 2012] fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Feb 19 15:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_src35.csv
[Sun Feb 19 15:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 15:12:58 2012] fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Feb 19 15:12:58 2012] fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Feb 19 15:12:58 2012] Fit fullrun_mos1_xmm0555650201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sun Feb 19 17:53:19 2012] Warning, spatial fit 35 centroid is now closest to src. 2
[Sun Feb 19 17:53:19 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 17:53:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 17:53:19 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 17:53:19 2012] Source does appear to be extended
[Sun Feb 19 17:53:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 23:14:26 2012] XMMSAS src. selection expression = ellipse(17676.850000, 23892.770000, 1204.482035, 1204.482035, 0.000000, X, Y)
[Sun Feb 19 23:14:26 2012] Writing source region out to fullrun_mos1_xmm0555650201_pi300-10000_pass1_cl_src49_src.reg
[Sun Feb 19 23:14:26 2012] Extracting stamp from image fullrun_mos1_xmm0555650201_pi300-10000_cl_sm2.00.img.gz, (135, 206) - (273, 344)
[Sun Feb 19 23:14:26 2012] XMMSAS bgd. selection expression = annulus(17676.850000, 23892.770000, 2007.470058, 4014.940116, X, Y) && !ellipse(17174.508400, 26462.008800, 465.204813, 465.204813, 0.000000, X, Y) && !ellipse(20232.583720, 23268.921200, 354.642410, 354.642410, 0.000000, X, Y) && !ellipse(18333.694400, 22520.480600, 465.473613, 465.473613, 0.000000, X, Y) && !ellipse(19275.343240, 27832.766600, 365.297611, 196.730406, 125.944260, X, Y) && !ellipse(18585.172500, 23702.298400, 400.633612, 400.633612, 0.000000, X, Y) && !ellipse(20408.897659, 20171.904434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17541.889080, 23974.198000, 1452.848042, 488.945614, 23.904000, X, Y) && !ellipse(17367.423600, 25462.032800, 987.648028, 536.848815, 7.682000, X, Y)
[Sun Feb 19 23:14:26 2012] Writing fullrun_mos1_xmm0555650201_pi300-10000_pass1_cl_src49.gif
[Sun Feb 19 23:31:14 2012] Mean detx,y = (-1971.52, -9798.85) 
[Sun Feb 19 23:31:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 23:31:58 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 23:31:58 2012] Setting source spectrum file to fullrun_mos1_xmm0555650201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun Feb 19 23:31:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555650201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Mon Feb 20 03:09:50 2012] Updating aperture counts using extracted products
[Mon Feb 20 03:09:50 2012] Error reading totcts from fullrun_mos1_xmm0555650201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Feb 20 03:09:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 03:09:52 2012] Using photon index=1.80, rate=0.00348, arf fullrun_mos1_xmm0555650201_pi300-10000_pass1_cl_src49.arf
[Mon Feb 20 03:09:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 03:09:52 2012] Updating source flux to 5.6e-14
[Mon Feb 20 03:09:59 2012] Flag c found in src. 49 procflags, skipping spectral fitting