[Mon Jul 22 00:06:40 2013] Detection parameters:
  Position = (285.9, 350.9) = 15 3 43.73 -42 1 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3216.2 +/- 90.1
  Background counts = 1076.3
  Rate = 0.07 +/- 0.002

[Mon Jul 22 00:06:55 2013] Off-axis axis estimate = 3.91'
[Mon Jul 22 00:09:35 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:35 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Mon Jul 22 00:09:35 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.849
[Mon Jul 22 00:09:35 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 8.38"
[Mon Jul 22 00:09:37 2013] fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_src35.ximg exists
[Mon Jul 22 00:09:37 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_src35.csv
[Mon Jul 22 00:09:37 2013] fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon Jul 22 00:09:37 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_src35.csv
[Mon Jul 22 00:09:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:38 2013] fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon Jul 22 00:09:38 2013] fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Jul 22 00:09:39 2013] Fit fullrun_pn_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Mon Jul 22 00:10:16 2013] Spatial fit model total counts = 27002.300000, observed total counts = 27016.000000
[Mon Jul 22 00:10:16 2013] Offset between fit and detection position for source 42 = 0.785932 pixels
[Mon Jul 22 00:10:16 2013] 26197.410000 total counts/ 25049.200000 bgd. counts: snr = 7.254782
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.785932 pixels
  Position = (286.0, 351.7) = 15 3 43.70 -42 1 23.2
  Extent = 7.3 (6.3-8.3)", rotation angle = 0
  Source counts = 1148.2 +/- 161.9
  Background counts = 25049.2
  Rate = 0.02 +/- 0.003
[Mon Jul 22 00:10:16 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:16 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:10:16 2013] Source does appear to be extended
[Mon Jul 22 00:10:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:16 2013] Source is confused with source 49
[Mon Jul 22 00:11:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:11:57 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Mon Jul 22 00:11:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.048
[Mon Jul 22 00:11:57 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.33"
[Mon Jul 22 00:11:58 2013] fullrun_pn_xmm0555631001_pi300-10000_cl_pass1_src35.ximg exists
[Mon Jul 22 00:11:58 2013] fullrun_pn_xmm0555631001_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon Jul 22 00:11:58 2013] Fit fullrun_pn_xmm0555631001_pi300-10000_cl_pass1_src35 appears to have run properly
[Mon Jul 22 00:11:59 2013] fullrun_pn_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon Jul 22 00:11:59 2013] fullrun_pn_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon Jul 22 00:11:59 2013] Fit fullrun_pn_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Mon Jul 22 00:12:36 2013] Spatial fit model total counts = 27007.700000, observed total counts = 27016.000000
[Mon Jul 22 00:12:36 2013] Offset between fit and detection position for source 42 = 0.008844 pixels
[Mon Jul 22 00:12:36 2013] 26202.150000 total counts/ 25064.100000 bgd. counts: snr = 7.188450
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.008844 pixels
  Position = (286.0, 351.7) = 15 3 43.71 -42 1 23.3
  Extent = 7.3 (6.1-8.4)", rotation angle = 0
  Source counts = 1138.0 +/- 161.9
  Background counts = 25064.1
  Rate = 0.02 +/- 0.003
[Mon Jul 22 00:12:36 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:36 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:12:36 2013] Source does appear to be extended
[Mon Jul 22 00:12:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:14:22 2013] Counts = 1138.050000, rescaling region sizes by 2.000000
[Mon Jul 22 00:14:22 2013] XMMSAS src. selection expression = ellipse(24832.762406, 30546.349800, 872.397625, 872.397625, 0.000000, X, Y)
[Mon Jul 22 00:14:22 2013] Not overwriting source region fullrun_pn_xmm0555631001_pi300-10000_pass1_cl_src42_src.reg
[Mon Jul 22 00:14:22 2013] Extracting stamp from image fullrun_pn_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (236, 302) - (336, 402)
[Mon Jul 22 00:14:22 2013] XMMSAS bgd. selection expression = annulus(24832.762406, 30546.349800, 2907.992084, 5815.984167, X, Y) && !ellipse(19644.606925, 41797.718000, 6632.304191, 6632.304191, 356.937000, X, Y) && !ellipse(18933.925339, 37174.939056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18831.206238, 36137.597870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27314.481506, 33904.760712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25917.750244, 30621.806366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20386.754715, 37215.778717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30223.830750, 36389.793793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18826.208145, 34925.744263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18298.229019, 35013.925751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19611.334000, 33638.842000, 1698.920049, 1698.920049, 0.000000, X, Y) && !ellipse(18299.047020, 34336.964000, 1908.736055, 1300.784037, 107.137000, X, Y) && !ellipse(19912.474000, 33973.378000, 1119.168032, 1119.168032, 0.000000, X, Y) && !ellipse(18864.727000, 33370.930000, 1275.976037, 1275.976037, 0.000000, X, Y) && !ellipse(27838.180725, 32680.266510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20736.435800, 32259.663400, 1576.304045, 1576.304045, 0.000000, X, Y) && !ellipse(18821.122437, 31881.105347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.677000, 32182.316400, 1115.272032, 1115.272032, 0.000000, X, Y) && !ellipse(18775.569200, 31615.042600, 617.376818, 617.376818, 0.000000, X, Y) && !ellipse(18178.191162, 31359.739899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23258.337494, 30670.212860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21057.932800, 30744.296000, 754.157622, 380.952811, 0.000000, X, Y) && !ellipse(20267.014000, 30578.176800, 1530.016044, 1530.016044, 0.000000, X, Y) && !ellipse(21251.135800, 29880.026000, 902.608026, 902.608026, 0.000000, X, Y) && !ellipse(18916.366302, 31015.865814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.153800, 30147.370600, 1340.784039, 1340.784039, 0.000000, X, Y) && !ellipse(24811.166400, 30029.301600, 4895.088141, 4895.088141, 0.000000, X, Y) && !ellipse(30966.997345, 29428.006958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.565430, 29146.449066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22068.867111, 29007.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.634857, 28607.438293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.103241, 28598.151001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20574.035000, 28738.670600, 866.392025, 866.392025, 0.000000, X, Y) && !ellipse(25716.549469, 28116.988007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.772522, 27686.995392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.418580, 27799.408200, 1154.800033, 735.168821, 212.528000, X, Y) && !ellipse(23677.988770, 27360.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22041.826300, 27482.726000, 1312.432038, 1312.432038, 0.000000, X, Y) && !ellipse(23985.528778, 26644.232635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23080.947021, 26678.291351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28447.425200, 26817.717000, 1199.216035, 1199.216035, 0.000000, X, Y) && !ellipse(25087.153534, 26580.493347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.180847, 26053.536407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22222.378250, 26321.572235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23610.022675, 25617.033661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29170.447120, 25524.452000, 1244.920036, 1244.920036, 0.000000, X, Y) && !ellipse(26370.718000, 25596.408000, 571.917616, 571.917616, 0.000000, X, Y) && !ellipse(24459.847107, 25170.686066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.788757, 25134.298889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.143000, 24662.769600, 994.240029, 994.240029, 0.000000, X, Y) && !ellipse(26420.015411, 23880.763977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.657562, 24224.590271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.123749, 24226.719604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26677.074000, 22863.324000, 3812.808110, 3812.808110, 0.000000, X, Y) && !ellipse(28365.400000, 21878.750000, 8260.056238, 8260.056238, 0.000000, X, Y) && !ellipse(29883.163940, 36906.252747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28702.477722, 36921.280212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23742.373230, 37186.684906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20706.303421, 36496.616241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23746.002655, 36622.836334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28229.247955, 37016.274506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26624.720825, 35965.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28332.310883, 36340.561584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.312637, 35699.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30003.163300, 35875.936768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26967.466522, 35444.199799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22068.596298, 34995.213104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21133.496307, 35718.015625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27228.323151, 34756.563141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22573.666504, 34750.536224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23285.463928, 34921.716583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29979.084839, 35006.619110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28073.583588, 34578.931061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21647.261734, 34335.494080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29595.563202, 33973.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.209625, 33876.813873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30905.626343, 33887.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22268.165558, 34231.366486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23377.296082, 33799.536591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22825.166809, 32912.807251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29855.410919, 32219.154297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.229523, 32761.959106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30312.840607, 32049.497925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24660.867340, 31867.551422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.048981, 31351.902252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29092.772339, 31612.618164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22972.582001, 31191.628754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29611.172119, 30736.822235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30199.335449, 30015.501221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20373.509600, 29106.766000, 1246.024036, 1246.024036, 22.246300, X, Y) && !ellipse(26446.610840, 29640.029633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31245.687805, 29724.037415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19631.571457, 29534.314331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19778.255188, 28584.546631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20497.752197, 28062.474945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31418.893951, 25802.954742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.179138, 25716.068909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25284.156708, 25711.186310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22916.369720, 25169.459442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.341095, 25181.266357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27960.789978, 24820.254059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29027.790200, 24968.038000, 7469.520215, 7469.520215, 0.000000, X, Y) && !ellipse(23128.121582, 24636.202118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28039.827545, 24231.822571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21459.686569, 24033.499847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22243.946381, 24484.512329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23305.490814, 24223.326477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.580231, 37116.610718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21163.192810, 37099.164520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25477.384430, 35974.934845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.061737, 33452.439301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.233398, 33270.134369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26924.157684, 33262.267517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31347.848022, 32577.835480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.522369, 31291.237488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30130.389648, 31270.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30852.982422, 31117.649017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28640.594299, 28401.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27933.387421, 27772.718323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.376831, 35427.552765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28748.056610, 34175.042694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30283.866272, 33367.696075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29051.566284, 23921.255829, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:14:22 2013] Writing fullrun_pn_xmm0555631001_pi300-10000_pass1_cl_src42.gif