[Mon Jul 22 00:07:23 2013] Detection parameters:
  Position = (281.0, 290.8) = 15 3 45.67 -42 5 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 589.9 +/- 40.5
  Background counts = 242.8
  Rate = 0.01 +/- 0.0007

[Mon Jul 22 00:07:27 2013] Off-axis axis estimate = 1.38'
[Mon Jul 22 00:09:43 2013] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:43 2013] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Jul 22 00:09:43 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.876
[Mon Jul 22 00:09:43 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 7.12"
[Mon Jul 22 00:09:44 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src69.ximg exists
[Mon Jul 22 00:09:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src69.csv
[Mon Jul 22 00:09:44 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src69_1.ximg exists
[Mon Jul 22 00:09:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src69.csv
[Mon Jul 22 00:09:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:46 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Mon Jul 22 00:09:46 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Mon Jul 22 00:09:46 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Mon Jul 22 00:10:50 2013] Spatial fit model total counts = 5648.950000, observed total counts = 5653.000000
[Mon Jul 22 00:10:50 2013] Offset between fit and detection position for source 256 = 2.314050 pixels
[Mon Jul 22 00:10:50 2013] Warning, changing simple spatial fit ID from 69 to 53
[Mon Jul 22 00:10:50 2013] 5644.552000 total counts/ 5152.130000 bgd. counts: snr = 6.860315
Spatial fit parameters:
  Offset between fit and detection position for source 256 = 2.314050 pixels
  Position = (282.3, 288.9) = 15 3 45.17 -42 5 56.1
  Extent = 14.5 (14.5-29.1)", rotation angle = 0
  Source counts = 492.4 +/- 75.1
  Background counts = 5152.1
  Rate = 0.008 +/- 0.001
[Mon Jul 22 00:10:50 2013] Spatial fit model total counts = 5882.970000, observed total counts = 5885.000000
[Mon Jul 22 00:10:50 2013] Offset between fit and detection position for source 256 = 1.089796 pixels
[Mon Jul 22 00:10:50 2013] Warning, changing simple spatial fit ID from 53 to 69
[Mon Jul 22 00:10:50 2013] 5855.007000 total counts/ 5105.870000 bgd. counts: snr = 10.483985
Spatial fit parameters:
  Offset between fit and detection position for source 256 = 1.089796 pixels
  Position = (282.6, 287.9) = 15 3 45.03 -42 6 0.6
  Extent = 14.2 (14.2-28.5)", rotation angle = 0
  Source counts = 749.1 +/- 76.5
  Background counts = 5105.9
  Rate = 0.01 +/- 0.001
[Mon Jul 22 00:10:51 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:51 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:10:51 2013] Source does appear to be extended
[Mon Jul 22 00:10:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:51 2013] Source is confused with source 260
[Mon Jul 22 00:12:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:04 2013] Initial guess for spatial extent in simple fitting = 14.24"
[Mon Jul 22 00:12:04 2013] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.983
[Mon Jul 22 00:12:04 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 14.24"
[Mon Jul 22 00:12:05 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src68.ximg exists
[Mon Jul 22 00:12:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src68.csv
[Mon Jul 22 00:12:05 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src68_1.ximg exists
[Mon Jul 22 00:12:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src68.csv
[Mon Jul 22 00:12:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:07 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Mon Jul 22 00:12:07 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Mon Jul 22 00:12:07 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Mon Jul 22 00:13:11 2013] Spatial fit model total counts = 5654.950000, observed total counts = 5653.000000
[Mon Jul 22 00:13:11 2013] Offset between fit and detection position for source 256 = 1.427471 pixels
[Mon Jul 22 00:13:11 2013] Warning, changing simple spatial fit ID from 68 to 53
[Mon Jul 22 00:13:11 2013] 5165.420000 total counts/ 4573.890000 bgd. counts: snr = 8.746492
Spatial fit parameters:
  Offset between fit and detection position for source 256 = 1.427471 pixels
  Position = (282.0, 289.2) = 15 3 45.29 -42 5 55.1
  Extent = 14.5 (14.5-14.5)", rotation angle = 0
  Source counts = 591.5 +/- 71.9
  Background counts = 4573.9
  Rate = 0.009 +/- 0.001
[Mon Jul 22 00:13:11 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:13:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:13:11 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:13:11 2013] Source does appear to be extended
[Mon Jul 22 00:13:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:33 2013] XMMSAS src. selection expression = ellipse(24482.158000, 25109.554000, 871.884025, 871.884025, 0.000000, X, Y)
[Mon Jul 22 00:15:33 2013] Not overwriting source region fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src256_src.reg
[Mon Jul 22 00:15:33 2013] Extracting stamp from image fullrun_mos2_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (232, 239) - (332, 339)
[Mon Jul 22 00:15:33 2013] XMMSAS bgd. selection expression = annulus(24482.158000, 25109.554000, 1453.140042, 2906.280084, X, Y) && !ellipse(27660.994690, 26588.291168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23723.472200, 27664.270000, 626.789618, 626.789618, 0.000000, X, Y) && !ellipse(24265.552063, 26836.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24085.888000, 24013.556000, 1206.584035, 1206.584035, 0.000000, X, Y) && !ellipse(24799.300000, 27935.712000, 577.640817, 577.640817, 0.000000, X, Y) && !ellipse(23556.149000, 28575.004000, 1238.096036, 1238.096036, 0.000000, X, Y) && !ellipse(21497.384000, 27750.364400, 1331.104038, 1331.104038, 0.000000, X, Y) && !ellipse(20592.064311, 28754.803408, 1093.823913, 710.478756, 339.491368, X, Y) && !ellipse(26288.514600, 22666.338800, 719.715221, 719.715221, 0.000000, X, Y) && !ellipse(28545.854000, 26741.888600, 1240.688036, 1240.688036, 0.000000, X, Y) && !ellipse(21841.946600, 27702.110300, 2047.344059, 823.840024, 5.814000, X, Y) && !ellipse(23903.250000, 25359.276000, 2390.176069, 2390.176069, 0.000000, X, Y) && !ellipse(25326.530000, 26536.990200, 1098.088032, 1098.088032, 0.000000, X, Y) && !ellipse(26909.318726, 28762.109680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24401.938263, 23715.647705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.084000, 27967.682000, 1416.224041, 1416.224041, 0.000000, X, Y) && !ellipse(23003.734800, 26608.177000, 583.860817, 583.860817, 0.000000, X, Y) && !ellipse(26338.591200, 25493.575200, 616.618418, 616.618418, 0.000000, X, Y) && !ellipse(27685.460785, 21964.995728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.674000, 25560.178400, 1195.088034, 1195.088034, 0.000000, X, Y) && !ellipse(25005.073303, 23874.824677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.793213, 23526.375977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22216.469482, 26321.035919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25721.402863, 24031.213867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.644043, 23522.494324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.879242, 22230.652649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27466.227051, 26125.588593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22240.672729, 24415.513428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22463.729706, 27099.041809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26742.261627, 24656.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21953.864517, 26922.009766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23236.993713, 24668.495239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25105.951141, 22585.587585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26574.089417, 28555.147491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.054000, 28803.672000, 2632.440076, 2632.440076, 0.000000, X, Y) && !ellipse(25690.652313, 22309.305237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21443.691345, 24019.502533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21428.373154, 26756.630646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25298.586792, 25699.265228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28010.258484, 27416.004517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.317749, 24144.857086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.544403, 25102.576599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.562683, 27800.965179, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:33 2013] Writing fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src256.gif