[Mon Jul 22 00:07:19 2013] Detection parameters:
  Position = (229.3, 350.1) = 15 4 5.83 -42 1 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.8 +/- 32.0
  Background counts = 182.7
  Rate = 0.009 +/- 0.0007

[Mon Jul 22 00:07:27 2013] Off-axis axis estimate = 6.26'
[Mon Jul 22 00:09:43 2013] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:43 2013] Initial guess for spatial extent in simple fitting = 9.56"
[Mon Jul 22 00:09:43 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Mon Jul 22 00:09:43 2013] Giving source the simple spatial ID 86 for pass 0, mean size = 9.56"
[Mon Jul 22 00:09:45 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src86.ximg exists
[Mon Jul 22 00:09:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src86.csv
[Mon Jul 22 00:09:45 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src86_1.ximg exists
[Mon Jul 22 00:09:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src86.csv
[Mon Jul 22 00:09:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:46 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Mon Jul 22 00:09:46 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Mon Jul 22 00:09:46 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src86 appears to have run properly
[Mon Jul 22 00:10:51 2013] Spatial fit model total counts = 3503.470000, observed total counts = 3510.000000
[Mon Jul 22 00:10:51 2013] Offset between fit and detection position for source 179 = 2.366078 pixels
[Mon Jul 22 00:10:51 2013] 3377.091000 total counts/ 2570.500000 bgd. counts: snr = 15.909062
Spatial fit parameters:
  Offset between fit and detection position for source 179 = 2.366078 pixels
  Position = (231.4, 351.2) = 15 4 5.02 -42 1 25.2
  Extent = 19.1 (19.1-38.2)", rotation angle = 0
  Source counts = 806.6 +/- 58.1
  Background counts = 2570.5
  Rate = 0.01 +/- 0.0009
[Mon Jul 22 00:10:51 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:51 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:10:51 2013] Source does appear to be extended
[Mon Jul 22 00:10:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:51 2013] Source is confused with source 39
[Mon Jul 22 00:12:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:04 2013] Initial guess for spatial extent in simple fitting = 19.11"
[Mon Jul 22 00:12:04 2013] source mask rpix=4.4, npix_max = 95, mask sum = 90, frac = 0.940
[Mon Jul 22 00:12:04 2013] Giving source the simple spatial ID 85 for pass 1, mean size = 19.11"
[Mon Jul 22 00:12:06 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src85.ximg exists
[Mon Jul 22 00:12:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src85.csv
[Mon Jul 22 00:12:06 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src85_1.ximg exists
[Mon Jul 22 00:12:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src85.csv
[Mon Jul 22 00:12:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:08 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Mon Jul 22 00:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src85.csv
[Mon Jul 22 00:12:08 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Mon Jul 22 00:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src85.csv
[Mon Jul 22 00:12:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:13:11 2013] Warning, spatial fit 85 centroid is now closest to src. 201
[Mon Jul 22 00:13:11 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:13:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:13:11 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:13:11 2013] Source does appear to be extended
[Mon Jul 22 00:13:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:34 2013] XMMSAS src. selection expression = ellipse(20083.184000, 30504.001180, 1146.750033, 1146.750033, 0.000000, X, Y)
[Mon Jul 22 00:15:34 2013] Not overwriting source region fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src179_src.reg
[Mon Jul 22 00:15:34 2013] Extracting stamp from image fullrun_mos2_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (165, 285) - (297, 417)
[Mon Jul 22 00:15:34 2013] XMMSAS bgd. selection expression = annulus(20083.184000, 30504.001180, 1911.250055, 3822.500110, X, Y) && !ellipse(22453.468018, 32844.987183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23723.472200, 27664.270000, 626.789618, 626.789618, 0.000000, X, Y) && !ellipse(18671.215500, 33534.389435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.552063, 26836.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20961.622986, 31013.054138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18846.294769, 31357.568085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23556.149000, 28575.004000, 1238.096036, 1238.096036, 0.000000, X, Y) && !ellipse(24100.069800, 30142.882800, 1489.752043, 1489.752043, 0.000000, X, Y) && !ellipse(24757.966400, 29906.840800, 1296.848037, 1296.848037, 0.000000, X, Y) && !ellipse(23957.232000, 30185.634000, 744.292821, 744.292821, 0.000000, X, Y) && !ellipse(21497.384000, 27750.364400, 1331.104038, 1331.104038, 0.000000, X, Y) && !ellipse(20592.064311, 28754.803408, 1093.823913, 710.478756, 339.491368, X, Y) && !ellipse(18804.036000, 30796.960000, 1546.064044, 1546.064044, 0.000000, X, Y) && !ellipse(21841.946600, 27702.110300, 2047.344059, 823.840024, 5.814000, X, Y) && !ellipse(19168.113525, 30262.748169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23903.250000, 25359.276000, 2390.176069, 2390.176069, 0.000000, X, Y) && !ellipse(19697.218384, 33795.824860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20746.514000, 35268.142000, 1767.936051, 1767.936051, 0.000000, X, Y) && !ellipse(23214.895905, 33881.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19949.520508, 31934.896240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23003.734800, 26608.177000, 583.860817, 583.860817, 0.000000, X, Y) && !ellipse(18705.838600, 34371.182000, 1794.272052, 1773.208051, 43.571000, X, Y) && !ellipse(23767.033142, 33295.479279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.674000, 25560.178400, 1195.088034, 1195.088034, 0.000000, X, Y) && !ellipse(23312.287689, 30490.079742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22211.650604, 34301.833618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.427429, 34753.106293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20718.229813, 32154.562744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22216.469482, 26321.035919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.679932, 34641.916321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21287.599518, 29980.977875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23935.112427, 34925.651337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19779.349060, 28419.948090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19370.608627, 32366.861542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17791.828644, 29096.800018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22463.729706, 27099.041809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21953.864517, 26922.009766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22150.760162, 29197.138885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24563.486176, 28911.423218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20754.424500, 34578.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18696.831223, 32404.528442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20246.631561, 32683.810974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.054000, 28803.672000, 2632.440076, 2632.440076, 0.000000, X, Y) && !ellipse(22439.587524, 34933.696075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21457.903717, 34051.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22597.601593, 31190.712769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20044.566574, 29526.442169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19496.482239, 29700.251007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21428.373154, 26756.630646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22206.871552, 31433.860352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16045.925186, 31019.723572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.606842, 34559.913086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.677414, 34998.107086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.311218, 30353.802399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20735.518036, 30141.102692, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:34 2013] Writing fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src179.gif