[Mon Jul 22 00:07:18 2013] Detection parameters:
  Position = (286.2, 350.9) = 15 3 43.62 -42 1 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 547.1 +/- 42.6
  Background counts = 411.8
  Rate = 0.01 +/- 0.0007

[Mon Jul 22 00:07:27 2013] Off-axis axis estimate = 3.91'
[Mon Jul 22 00:09:43 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:43 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Mon Jul 22 00:09:43 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.061
[Mon Jul 22 00:09:43 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 8.38"
[Mon Jul 22 00:09:44 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src73.ximg exists
[Mon Jul 22 00:09:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src73.csv
[Mon Jul 22 00:09:44 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src73_1.ximg exists
[Mon Jul 22 00:09:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src73.csv
[Mon Jul 22 00:09:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:46 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Mon Jul 22 00:09:46 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Jul 22 00:09:46 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Mon Jul 22 00:10:50 2013] Source 170 is offset by 3.507947 and -4.813952 pixels which is larger than
2 X fitted extent = 0.964667 x 0.964667, not incorporating fit results
[Mon Jul 22 00:10:50 2013] Spatial fit model total counts = 6561.210000, observed total counts = 6560.000000
[Mon Jul 22 00:10:50 2013] Offset between fit and detection position for source 170 = 0.551264 pixels
[Mon Jul 22 00:10:50 2013] 6316.938000 total counts/ 6060.530000 bgd. counts: snr = 3.293641
Spatial fit parameters:
  Offset between fit and detection position for source 170 = 0.551264 pixels
  Position = (286.1, 351.4) = 15 3 43.68 -42 1 24.3
  Extent = 7.1 (5.4-9.7)", rotation angle = 0
  Source counts = 256.4 +/- 79.5
  Background counts = 6060.5
  Rate = 0.004 +/- 0.001
[Mon Jul 22 00:10:51 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:51 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:10:51 2013] Source does appear to be extended
[Mon Jul 22 00:10:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:12:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:04 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Mon Jul 22 00:12:04 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.098
[Mon Jul 22 00:12:04 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 7.11"
[Mon Jul 22 00:12:05 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src72.ximg exists
[Mon Jul 22 00:12:05 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src72_1.ximg exists
[Mon Jul 22 00:12:05 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src72 appears to have run properly
[Mon Jul 22 00:12:07 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Mon Jul 22 00:12:07 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Mon Jul 22 00:12:07 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Mon Jul 22 00:13:11 2013] Spatial fit model total counts = 6569.050000, observed total counts = 6560.000000
[Mon Jul 22 00:13:11 2013] Offset between fit and detection position for source 170 = 0.024110 pixels
[Mon Jul 22 00:13:11 2013] 6333.302000 total counts/ 6073.030000 bgd. counts: snr = 3.339833
Spatial fit parameters:
  Offset between fit and detection position for source 170 = 0.024110 pixels
  Position = (286.1, 351.4) = 15 3 43.68 -42 1 24.3
  Extent = 7.1 (5.4-9.7)", rotation angle = 0
  Source counts = 260.3 +/- 79.6
  Background counts = 6073.0
  Rate = 0.004 +/- 0.001
[Mon Jul 22 00:13:11 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:13:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:13:11 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:13:11 2013] Source does appear to be extended
[Mon Jul 22 00:13:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:13:11 2013] Source is confused with source 190
[Mon Jul 22 00:15:33 2013] XMMSAS src. selection expression = ellipse(24840.180560, 30525.882200, 428.010012, 428.010012, 0.000000, X, Y)
[Mon Jul 22 00:15:33 2013] Not overwriting source region fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src170_src.reg
[Mon Jul 22 00:15:33 2013] Extracting stamp from image fullrun_mos2_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (261, 327) - (311, 376)
[Mon Jul 22 00:15:33 2013] XMMSAS bgd. selection expression = annulus(24840.180560, 30525.882200, 713.350021, 1426.700041, X, Y) && !ellipse(26348.579193, 29687.721924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23556.149000, 28575.004000, 1238.096036, 1238.096036, 0.000000, X, Y) && !ellipse(24100.069800, 30142.882800, 1489.752043, 1489.752043, 0.000000, X, Y) && !ellipse(24757.966400, 29906.840800, 1296.848037, 1296.848037, 0.000000, X, Y) && !ellipse(23957.232000, 30185.634000, 744.292821, 744.292821, 0.000000, X, Y) && !ellipse(21841.946600, 27702.110300, 2047.344059, 823.840024, 5.814000, X, Y) && !ellipse(26442.997345, 28995.874390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26909.318726, 28762.109680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.084000, 27967.682000, 1416.224041, 1416.224041, 0.000000, X, Y) && !ellipse(23312.287689, 30490.079742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24563.486176, 28911.423218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26574.089417, 28555.147491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.466522, 29756.447357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22597.601593, 31190.712769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.112518, 28923.769104, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:33 2013] Writing fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src170.gif