[Mon Jul 22 00:07:11 2013] Detection parameters:
  Position = (217.1, 443.0) = 15 4 10.53 -41 54 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1433.6 +/- 51.8
  Background counts = 149.0
  Rate = 0.02 +/- 0.0008

[Mon Jul 22 00:07:27 2013] Off-axis axis estimate = 12.03'
[Mon Jul 22 00:09:43 2013] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:43 2013] Initial guess for spatial extent in simple fitting = 12.44"
[Mon Jul 22 00:09:43 2013] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.886
[Mon Jul 22 00:09:43 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 12.44"
[Mon Jul 22 00:09:44 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src15.ximg exists
[Mon Jul 22 00:09:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src15.csv
[Mon Jul 22 00:09:44 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Jul 22 00:09:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src15.csv
[Mon Jul 22 00:09:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:45 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Jul 22 00:09:45 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jul 22 00:09:45 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Jul 22 00:10:50 2013] Warning, spatial fit 15 centroid is now closest to src. 27
[Mon Jul 22 00:10:51 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:51 2013] Assessing source extent using major
[Mon Jul 22 00:10:51 2013] Source does appear to be extended
[Mon Jul 22 00:10:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:51 2013] Source is confused with source 13
[Mon Jul 22 00:10:51 2013] Source is confused with source 15
[Mon Jul 22 00:12:04 2013] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:04 2013] Initial guess for spatial extent in simple fitting = 12.44"
[Mon Jul 22 00:12:04 2013] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.886
[Mon Jul 22 00:12:04 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 12.44"
[Mon Jul 22 00:12:05 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src15.ximg exists
[Mon Jul 22 00:12:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src15.csv
[Mon Jul 22 00:12:05 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Jul 22 00:12:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src15.csv
[Mon Jul 22 00:12:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:06 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Jul 22 00:12:06 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jul 22 00:12:06 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Jul 22 00:13:10 2013] Warning, spatial fit 15 centroid is now closest to src. 27
[Mon Jul 22 00:13:10 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 10.564031 pixels away
[Mon Jul 22 00:13:11 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:13:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:13:11 2013] Assessing source extent using major
[Mon Jul 22 00:13:11 2013] Source does appear to be extended
[Mon Jul 22 00:13:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:24 2013] Counts = 1433.647461, rescaling region sizes by 2.000000
[Mon Jul 22 00:15:24 2013] XMMSAS src. selection expression = ellipse(18843.151215, 38496.076324, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:24 2013] Not overwriting source region fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src14_src.reg
[Mon Jul 22 00:15:24 2013] Extracting stamp from image fullrun_mos2_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (142, 368) - (292, 518)
[Mon Jul 22 00:15:24 2013] XMMSAS bgd. selection expression = annulus(18843.151215, 38496.076324, 4350.000000, 8700.000000, X, Y) && !ellipse(19582.955200, 41969.122000, 1747.424050, 1747.424050, 0.000000, X, Y) && !ellipse(22453.468018, 32844.987183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19370.874000, 40899.266000, 1814.736052, 1814.736052, 0.000000, X, Y) && !ellipse(19862.678000, 42420.162000, 1675.696048, 1675.696048, 0.000000, X, Y) && !ellipse(18912.526000, 40167.192000, 2108.472061, 2108.472061, 0.000000, X, Y) && !ellipse(19987.816000, 42236.694000, 2109.096061, 758.215222, 50.166000, X, Y) && !ellipse(26348.579193, 29687.721924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27005.319275, 41337.231140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19970.764725, 42921.957062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18671.215500, 33534.389435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20961.622986, 31013.054138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18818.691757, 38913.587646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18846.294769, 31357.568085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18953.435400, 37864.642000, 1925.536055, 1925.536055, 0.000000, X, Y) && !ellipse(23556.149000, 28575.004000, 1238.096036, 1238.096036, 0.000000, X, Y) && !ellipse(24100.069800, 30142.882800, 1489.752043, 1489.752043, 0.000000, X, Y) && !ellipse(20512.129181, 43395.741730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.966400, 29906.840800, 1296.848037, 1296.848037, 0.000000, X, Y) && !ellipse(18908.612289, 36400.679413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.232000, 30185.634000, 744.292821, 744.292821, 0.000000, X, Y) && !ellipse(20592.064311, 28754.803408, 1093.823913, 710.478756, 339.491368, X, Y) && !ellipse(20762.929886, 42842.377869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18847.085968, 37363.586853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18804.036000, 30796.960000, 1546.064044, 1546.064044, 0.000000, X, Y) && !ellipse(19168.113525, 30262.748169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19697.218384, 33795.824860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26442.997345, 28995.874390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20746.514000, 35268.142000, 1767.936051, 1767.936051, 0.000000, X, Y) && !ellipse(20753.935974, 41279.529388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19501.399353, 38677.911316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23214.895905, 33881.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24840.180560, 30525.882200, 570.680016, 570.680016, 0.000000, X, Y) && !ellipse(18762.087860, 36929.160339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19949.520508, 31934.896240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18705.838600, 34371.182000, 1794.272052, 1773.208051, 43.571000, X, Y) && !ellipse(20083.184000, 30504.001180, 1529.000044, 1529.000044, 0.000000, X, Y) && !ellipse(23767.033142, 33295.479279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21106.065872, 42149.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18236.632339, 35970.070831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23312.287689, 30490.079742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22211.650604, 34301.833618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25359.126770, 34934.479309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19582.543686, 38131.086792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18100.922000, 36372.394000, 1486.960043, 1486.960043, 0.000000, X, Y) && !ellipse(23151.427429, 34753.106293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20718.229813, 32154.562744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.679932, 34641.916321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.432098, 37878.808563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20411.901825, 37184.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18220.589325, 37192.337463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21289.448746, 43184.871338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25394.728058, 38317.039734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21287.599518, 29980.977875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23935.112427, 34925.651337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23717.145142, 36931.581726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19370.608627, 32366.861542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17791.828644, 29096.800018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19484.299637, 36416.617554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21435.450134, 41198.051849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.270355, 37456.496948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24439.440552, 37196.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22150.760162, 29197.138885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20754.424500, 34578.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.628723, 39977.561432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18696.831223, 32404.528442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20246.631561, 32683.810974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22173.325256, 42242.131500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.054000, 28803.672000, 2632.440076, 2632.440076, 0.000000, X, Y) && !ellipse(22439.587524, 34933.696075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21457.903717, 34051.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26341.482300, 38267.053497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.466522, 29756.447357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22597.601593, 31190.712769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.797119, 36688.922668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.293060, 38750.369720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25041.287903, 36989.424194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25243.662201, 37901.049744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20044.566574, 29526.442169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19496.482239, 29700.251007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21473.588303, 39617.608490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21504.806137, 38955.900848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22024.655563, 43026.127136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.152954, 37796.781433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22154.420120, 43954.561676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19680.564713, 35350.020599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.344269, 37428.273987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22782.327911, 41463.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.468475, 35321.545410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19876.213821, 35886.578125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22206.871552, 31433.860352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16045.925186, 31019.723572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22895.888824, 44157.379364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.606842, 34559.913086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27293.820068, 34702.421783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22115.756256, 43449.747681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.677414, 34998.107086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.311218, 30353.802399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21627.921173, 40610.939911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20735.518036, 30141.102692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22068.243179, 39494.412476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.506256, 32775.767914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.001328, 38673.203949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26669.110260, 33342.444092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27332.684387, 33597.820740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23214.763153, 38325.620789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22808.421539, 43808.718262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25236.663544, 38884.087616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23974.053741, 38399.053589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20403.785400, 36042.393829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22294.529999, 39014.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26180.393707, 38741.387756, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:24 2013] Writing fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src14.gif