[Mon Jul 22 00:07:17 2013] Detection parameters:
  Position = (255.9, 394.8) = 15 3 55.45 -41 58 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.5 +/- 26.2
  Background counts = 260.7
  Rate = 0.008 +/- 0.0007

[Mon Jul 22 00:07:27 2013] Off-axis axis estimate = 7.64'
[Mon Jul 22 00:09:43 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:43 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Mon Jul 22 00:09:43 2013] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.828
[Mon Jul 22 00:09:43 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 10.25"
[Mon Jul 22 00:09:45 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src100.ximg exists
[Mon Jul 22 00:09:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src100.csv
[Mon Jul 22 00:09:45 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src100_1.ximg exists
[Mon Jul 22 00:09:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src100.csv
[Mon Jul 22 00:09:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:46 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Mon Jul 22 00:09:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src100.csv
[Mon Jul 22 00:09:46 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Mon Jul 22 00:09:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src100.csv
[Mon Jul 22 00:09:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:10:51 2013] Warning, spatial fit 100 centroid is now closest to src. 138
[Mon Jul 22 00:10:51 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:51 2013] Assessing source extent using major
[Mon Jul 22 00:10:51 2013] Source does appear to be extended
[Mon Jul 22 00:10:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:51 2013] Source is confused with source 133
[Mon Jul 22 00:12:04 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:04 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Mon Jul 22 00:12:04 2013] source mask rpix=2.4, npix_max = 32, mask sum = 27, frac = 0.828
[Mon Jul 22 00:12:04 2013] Giving source the simple spatial ID 99 for pass 1, mean size = 10.25"
[Mon Jul 22 00:12:06 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src99.ximg exists
[Mon Jul 22 00:12:06 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src99_1.ximg exists
[Mon Jul 22 00:12:06 2013] Fit fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_src99 appears to have run properly
[Mon Jul 22 00:12:08 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src99.ximg exists
[Mon Jul 22 00:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src99.csv
[Mon Jul 22 00:12:08 2013] fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src99_1.ximg exists
[Mon Jul 22 00:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src99.csv
[Mon Jul 22 00:12:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src99_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:13:11 2013] Warning, spatial fit 99 centroid is now closest to src. 139
[Mon Jul 22 00:13:11 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:13:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:13:11 2013] Assessing source extent using major
[Mon Jul 22 00:13:11 2013] Source does appear to be extended
[Mon Jul 22 00:13:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:35 2013] XMMSAS src. selection expression = ellipse(22211.650604, 34301.833618, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 22 00:15:35 2013] Not overwriting source region fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src137_src.reg
[Mon Jul 22 00:15:35 2013] Extracting stamp from image fullrun_mos2_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (218, 357) - (293, 432)
[Mon Jul 22 00:15:35 2013] XMMSAS bgd. selection expression = annulus(22211.650604, 34301.833618, 1087.500000, 2175.000000, X, Y) && !ellipse(22453.468018, 32844.987183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18953.435400, 37864.642000, 1925.536055, 1925.536055, 0.000000, X, Y) && !ellipse(18804.036000, 30796.960000, 1546.064044, 1546.064044, 0.000000, X, Y) && !ellipse(19697.218384, 33795.824860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20746.514000, 35268.142000, 1767.936051, 1767.936051, 0.000000, X, Y) && !ellipse(23214.895905, 33881.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19949.520508, 31934.896240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18705.838600, 34371.182000, 1794.272052, 1773.208051, 43.571000, X, Y) && !ellipse(23767.033142, 33295.479279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.427429, 34753.106293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20718.229813, 32154.562744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.679932, 34641.916321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20411.901825, 37184.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23935.112427, 34925.651337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23717.145142, 36931.581726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19370.608627, 32366.861542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19484.299637, 36416.617554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24439.440552, 37196.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20754.424500, 34578.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20246.631561, 32683.810974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22439.587524, 34933.696075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21457.903717, 34051.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25041.287903, 36989.424194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19680.564713, 35350.020599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.468475, 35321.545410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19876.213821, 35886.578125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22206.871552, 31433.860352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.606842, 34559.913086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.677414, 34998.107086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20403.785400, 36042.393829, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:35 2013] Writing fullrun_mos2_xmm0555631001_pi300-10000_pass1_cl_src137.gif