[Mon Jul 22 00:06:57 2013] Detection parameters:
  Position = (279.0, 309.0) = 15 3 46.46 -42 4 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1140.4 +/- 51.2
  Background counts = 281.8
  Rate = 0.02 +/- 0.0009

[Mon Jul 22 00:07:10 2013] Off-axis axis estimate = 1.61'
[Mon Jul 22 00:09:39 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:39 2013] Initial guess for spatial extent in simple fitting = 7.23"
[Mon Jul 22 00:09:39 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Mon Jul 22 00:09:39 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 7.23"
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src19.ximg exists
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Jul 22 00:09:40 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src19 appears to have run properly
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Jul 22 00:09:42 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Jul 22 00:10:33 2013] Source 40 is offset by 5.291318 and -7.648580 pixels which is larger than
2 X fitted extent = 3.077228 x 3.077228, not incorporating fit results
[Mon Jul 22 00:10:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:34 2013] Assessing source extent using major
[Mon Jul 22 00:10:34 2013] Source does appear to be extended
[Mon Jul 22 00:10:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:34 2013] Source is confused with source 235
[Mon Jul 22 00:12:00 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:00 2013] Initial guess for spatial extent in simple fitting = 7.23"
[Mon Jul 22 00:12:00 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Mon Jul 22 00:12:00 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 7.23"
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src19.csv
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src19.csv
[Mon Jul 22 00:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jul 22 00:12:03 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Jul 22 00:12:53 2013] Source 40 is offset by 3.238092 and -7.648580 pixels which is larger than
2 X fitted extent = 1.619467 x 1.619467, not incorporating fit results
[Mon Jul 22 00:12:53 2013] Spatial fit model total counts = 13714.500000, observed total counts = 13703.000000
[Mon Jul 22 00:12:53 2013] Offset between fit and detection position for source 40 = 2.169818 pixels
[Mon Jul 22 00:12:53 2013] Warning, changing simple spatial fit ID from 19 to 33
[Mon Jul 22 00:12:53 2013] 12996.757000 total counts/ 12366.100000 bgd. counts: snr = 5.671225
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.169818 pixels
  Position = (280.6, 307.5) = 15 3 45.83 -42 4 35.2
  Extent = 12.7 (10.3-15.1)", rotation angle = 0
  Source counts = 630.7 +/- 114.0
  Background counts = 12366.1
  Rate = 0.01 +/- 0.002
[Mon Jul 22 00:12:54 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:54 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:12:54 2013] Source does appear to be extended
[Mon Jul 22 00:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:02 2013] XMMSAS src. selection expression = ellipse(24360.933000, 26707.726000, 764.514022, 764.514022, 0.000000, X, Y)
[Mon Jul 22 00:15:02 2013] Not overwriting source region fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src40_src.reg
[Mon Jul 22 00:15:02 2013] Extracting stamp from image fullrun_mos1_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (237, 264) - (325, 351)
[Mon Jul 22 00:15:02 2013] XMMSAS bgd. selection expression = annulus(24360.933000, 26707.726000, 1274.190037, 2548.380073, X, Y) && !ellipse(23699.115680, 27665.755200, 711.625620, 711.625620, 0.000000, X, Y) && !ellipse(23687.174020, 28271.194400, 523.510415, 523.510415, 0.000000, X, Y) && !ellipse(23972.602000, 23986.940000, 1222.864035, 1222.864035, 0.000000, X, Y) && !ellipse(24777.497000, 29902.816400, 1276.160037, 902.696026, 189.978000, X, Y) && !ellipse(21969.361000, 27655.352000, 1293.704037, 1293.704037, 0.000000, X, Y) && !ellipse(24423.772400, 27711.572000, 1186.928034, 1186.928034, 0.000000, X, Y) && !ellipse(20548.424000, 28691.195000, 1804.176052, 896.696026, 347.590000, X, Y) && !ellipse(24490.519000, 24901.416000, 1137.864033, 880.320025, 90.000000, X, Y) && !ellipse(23618.880000, 28341.398000, 1281.520037, 892.792026, 230.842000, X, Y) && !ellipse(21738.626000, 27655.352000, 688.704020, 688.704020, 0.000000, X, Y) && !ellipse(26333.911800, 25478.862200, 656.804019, 656.804019, 0.000000, X, Y) && !ellipse(24743.474000, 26750.984000, 2207.424064, 2207.424064, 0.000000, X, Y) && !ellipse(23588.218200, 25422.058000, 2378.480068, 1509.400043, -0.000000, X, Y) && !ellipse(24476.241913, 23381.262695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23883.703400, 30234.943800, 1348.448039, 1348.448039, 0.000000, X, Y) && !ellipse(21219.030731, 30072.759583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.981200, 26604.624400, 726.484021, 726.484021, 0.000000, X, Y) && !ellipse(23459.258000, 30583.536000, 1424.016041, 1424.016041, 0.000000, X, Y) && !ellipse(25449.308000, 23555.246000, 1164.512034, 1164.512034, 0.000000, X, Y) && !ellipse(22200.881600, 26366.911600, 858.536025, 858.536025, 0.000000, X, Y) && !ellipse(26814.441254, 24765.916229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25362.126000, 28261.971200, 1177.240034, 1177.240034, 0.000000, X, Y) && !ellipse(26710.296600, 28777.491200, 1229.000035, 1229.000035, 0.000000, X, Y) && !ellipse(25101.835846, 24746.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.528000, 31368.976000, 2523.776073, 2523.776073, 0.000000, X, Y) && !ellipse(22067.332504, 26919.585724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22848.769000, 25410.139200, 630.961618, 630.961618, 0.000000, X, Y) && !ellipse(22237.863708, 24403.000275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26873.244800, 24289.152000, 1125.856032, 1125.856032, 0.000000, X, Y) && !ellipse(26153.904480, 27720.071747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25801.414825, 23843.853760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25724.852000, 23019.760000, 2329.024067, 2329.024067, 0.000000, X, Y) && !ellipse(22179.589798, 29092.400635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27290.145508, 26232.044647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.197845, 24368.275146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23240.166473, 24668.227081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.490540, 26488.459412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26330.793152, 23878.897491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21951.897141, 29691.277008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.261658, 28323.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24294.308685, 26234.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21122.690338, 29335.537598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26828.016418, 25964.587616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21361.478363, 26831.744080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27337.030670, 25806.252289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.716064, 25708.326843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.595917, 28852.778931, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:02 2013] Writing fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src40.gif