[Mon Jul 22 00:06:57 2013] Detection parameters:
  Position = (382.1, 377.0) = 15 3 6.22 -41 59 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1283.2 +/- 47.3
  Background counts = 252.3
  Rate = 0.03 +/- 0.001

[Mon Jul 22 00:07:10 2013] Off-axis axis estimate = 8.32'
[Mon Jul 22 00:09:39 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:39 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Mon Jul 22 00:09:39 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.610
[Mon Jul 22 00:09:39 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.59"
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jul 22 00:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src6.csv
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jul 22 00:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src6.csv
[Mon Jul 22 00:09:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jul 22 00:09:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jul 22 00:09:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Jul 22 00:09:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:10:33 2013] Warning, spatial fit 6 centroid is now closest to src. 157
[Mon Jul 22 00:10:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:34 2013] Assessing source extent using major
[Mon Jul 22 00:10:34 2013] Source does appear to be extended
[Mon Jul 22 00:10:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:34 2013] Source is confused with source 157
[Mon Jul 22 00:12:00 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:00 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Mon Jul 22 00:12:00 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.610
[Mon Jul 22 00:12:00 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.59"
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src6.csv
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src6.csv
[Mon Jul 22 00:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jul 22 00:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jul 22 00:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jul 22 00:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:53 2013] Spatial fit model total counts = 5925.960000, observed total counts = 5248.000000
[Mon Jul 22 00:12:53 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 22 00:12:54 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:54 2013] Assessing source extent using major
[Mon Jul 22 00:12:54 2013] Source does appear to be extended
[Mon Jul 22 00:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:00 2013] Counts = 1283.152466, rescaling region sizes by 2.000000
[Mon Jul 22 00:15:00 2013] XMMSAS src. selection expression = ellipse(33191.553467, 32752.703674, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:00 2013] Not overwriting source region fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src32_src.reg
[Mon Jul 22 00:15:00 2013] Extracting stamp from image fullrun_mos1_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (307, 302) - (457, 452)
[Mon Jul 22 00:15:00 2013] XMMSAS bgd. selection expression = annulus(33191.553467, 32752.703674, 4350.000000, 8700.000000, X, Y) && !ellipse(32509.034380, 28335.626200, 607.854417, 607.854417, 0.000000, X, Y) && !ellipse(26990.995392, 41341.131378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24360.933000, 26707.726000, 1019.352029, 1019.352029, 0.000000, X, Y) && !ellipse(23972.602000, 23986.940000, 1222.864035, 1222.864035, 0.000000, X, Y) && !ellipse(24777.497000, 29902.816400, 1276.160037, 902.696026, 189.978000, X, Y) && !ellipse(32765.004425, 24827.003143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24423.772400, 27711.572000, 1186.928034, 1186.928034, 0.000000, X, Y) && !ellipse(37652.316711, 25909.524618, 1804.176052, 1161.398338, 52.373054, X, Y) && !ellipse(31015.858940, 23665.352800, 488.976814, 488.976814, 0.000000, X, Y) && !ellipse(24490.519000, 24901.416000, 1137.864033, 880.320025, 90.000000, X, Y) && !ellipse(33450.482544, 23663.773743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28346.582800, 26844.505400, 894.704026, 894.704026, 0.000000, X, Y) && !ellipse(23618.880000, 28341.398000, 1281.520037, 892.792026, 230.842000, X, Y) && !ellipse(29076.919320, 25742.692200, 719.445621, 719.445621, 0.000000, X, Y) && !ellipse(26333.911800, 25478.862200, 656.804019, 656.804019, 0.000000, X, Y) && !ellipse(24743.474000, 26750.984000, 2207.424064, 2207.424064, 0.000000, X, Y) && !ellipse(29640.828796, 33826.384247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23588.218200, 25422.058000, 2378.480068, 1509.400043, -0.000000, X, Y) && !ellipse(37535.845154, 26834.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24476.241913, 23381.262695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23883.703400, 30234.943800, 1348.448039, 1348.448039, 0.000000, X, Y) && !ellipse(41495.835400, 24888.812600, 874.000025, 874.000025, 0.000000, X, Y) && !ellipse(36100.310638, 26668.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27603.322144, 32998.798340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.424072, 38839.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.686200, 30569.074000, 617.760818, 617.760818, 0.000000, X, Y) && !ellipse(23459.258000, 30583.536000, 1424.016041, 1424.016041, 0.000000, X, Y) && !ellipse(25449.308000, 23555.246000, 1164.512034, 1164.512034, 0.000000, X, Y) && !ellipse(27125.446075, 34603.102448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26814.441254, 24765.916229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25362.126000, 28261.971200, 1177.240034, 1177.240034, 0.000000, X, Y) && !ellipse(35443.692000, 28801.522400, 1652.928048, 1652.928048, 0.000000, X, Y) && !ellipse(26710.296600, 28777.491200, 1229.000035, 1229.000035, 0.000000, X, Y) && !ellipse(36935.580200, 26831.114838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25101.835846, 24746.258392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.964661, 37869.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39411.082000, 25227.518000, 2458.000071, 2449.560070, 0.000000, X, Y) && !ellipse(29816.623596, 32437.703033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.083038, 36057.814240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31341.601600, 29656.462600, 1007.816029, 1007.816029, 0.000000, X, Y) && !ellipse(28979.121155, 24773.302521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.528000, 31368.976000, 2523.776073, 2523.776073, 0.000000, X, Y) && !ellipse(29615.027800, 30455.270000, 1423.912041, 1423.912041, 0.000000, X, Y) && !ellipse(26873.244800, 24289.152000, 1125.856032, 1125.856032, 0.000000, X, Y) && !ellipse(29991.805084, 35771.392334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28305.898651, 36925.599945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26153.904480, 27720.071747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39007.514618, 26669.102295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25801.414825, 23843.853760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25724.852000, 23019.760000, 2329.024067, 2329.024067, 0.000000, X, Y) && !ellipse(31563.046112, 25097.529388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34244.937790, 28421.468479, 1749.981810, 799.913908, 88.941870, X, Y) && !ellipse(27290.145508, 26232.044647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28813.003937, 32498.447449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.197845, 24368.275146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34580.242645, 27278.983765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32898.156799, 30165.313904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.369141, 35625.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.055389, 36934.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.490540, 26488.459412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26330.793152, 23878.897491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36571.915527, 26749.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37810.624756, 27266.162628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.833771, 35312.807709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24990.534363, 38313.920074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29958.452606, 34997.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28475.616089, 38054.587433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31396.212036, 25786.528076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30665.322296, 26283.772583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.261658, 28323.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32326.651123, 32223.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31522.079010, 31376.713501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24294.308685, 26234.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.994690, 36837.529968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.731293, 36483.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30304.705597, 31957.195831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34177.668518, 23968.000275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36495.461304, 27431.026672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26828.016418, 25964.587616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25384.471680, 38875.129547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31204.561401, 32443.676849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27337.030670, 25806.252289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.264008, 34572.232422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.716064, 25708.326843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.763489, 33606.800049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28956.834839, 31515.104248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25172.695923, 34919.858063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.481720, 37356.606781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29376.956055, 31061.986328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38164.635742, 28408.504913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32550.029358, 29007.638824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25129.806580, 37899.592133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30700.525330, 30498.230682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37145.566467, 30049.440460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.007965, 29037.441528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42322.828461, 24054.479889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.740479, 28911.569244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36316.764557, 39275.736298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30250.338562, 36462.050415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25558.949585, 38490.989288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29171.523163, 37370.577545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33052.326385, 32124.361786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32487.537933, 32744.619110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33307.849060, 34546.401642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24250.556458, 38322.532990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.211884, 36498.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28540.945740, 36338.233124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36587.535065, 34929.817078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37807.985657, 30349.142822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27510.512939, 34046.393250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30980.030884, 30914.042786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31911.064697, 40407.939026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26418.613556, 38326.725281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40955.533508, 29960.088104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.369904, 34060.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32194.892639, 24485.741608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23949.157532, 37641.791443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.840332, 38148.349792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36407.062103, 38147.404602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27934.521118, 27849.998260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32829.415436, 31279.088074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33918.155334, 29506.670166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38812.577057, 24935.511536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42480.040710, 26022.977020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37962.784485, 26566.907562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41576.685577, 25931.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.784912, 40384.973022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30463.096680, 29874.659882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35669.598511, 38787.449860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.074951, 28765.696625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.690521, 28335.911102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32336.846436, 40841.274323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40066.512878, 27065.506134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29238.116608, 39188.247772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37621.368958, 36441.816437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28802.604187, 27562.137329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39506.803497, 28906.707886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.595917, 28852.778931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36311.746552, 38660.714691, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:00 2013] Writing fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src32.gif