[Mon Jul 22 00:06:55 2013] Detection parameters:
  Position = (226.4, 483.0) = 15 4 6.90 -41 51 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1926.0 +/- 60.8
  Background counts = 107.1
  Rate = 0.03 +/- 0.0009

[Mon Jul 22 00:07:10 2013] Off-axis axis estimate = 14.37'
[Mon Jul 22 00:09:39 2013] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:39 2013] Initial guess for spatial extent in simple fitting = 13.61"
[Mon Jul 22 00:09:39 2013] source mask rpix=3.1, npix_max = 52, mask sum = 55, frac = 1.044
[Mon Jul 22 00:09:39 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.61"
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jul 22 00:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src5.csv
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jul 22 00:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src5.csv
[Mon Jul 22 00:09:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jul 22 00:09:42 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jul 22 00:10:33 2013] Warning, spatial fit 5 centroid is now closest to src. 5
[Mon Jul 22 00:10:33 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.280202 pixels away
[Mon Jul 22 00:10:33 2013] Spatial fit model total counts = 10697.100000, observed total counts = 10403.000000
[Mon Jul 22 00:10:33 2013] Offset between fit and detection position for source 3 = 1.054664 pixels
[Mon Jul 22 00:10:33 2013] Warning, changing simple spatial fit ID from 5 to 13
[Mon Jul 22 00:10:33 2013] 10895.930000 total counts/ 9893.970000 bgd. counts: snr = 10.073145
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.054664 pixels
  Position = (225.4, 482.8) = 15 4 7.30 -41 51 52.4
  Extent = 11.4 (10.3-12.7)", rotation angle = 0
  Source counts = 1002.0 +/- 104.4
  Background counts = 9894.0
  Rate = 0.02 +/- 0.002
[Mon Jul 22 00:10:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:34 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:10:34 2013] Source does appear to be extended
[Mon Jul 22 00:10:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:34 2013] Source is confused with source 5
[Mon Jul 22 00:12:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:00 2013] Initial guess for spatial extent in simple fitting = 11.40"
[Mon Jul 22 00:12:00 2013] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.899
[Mon Jul 22 00:12:00 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.40"
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src5.csv
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src5.csv
[Mon Jul 22 00:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jul 22 00:12:03 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jul 22 00:12:53 2013] Warning, spatial fit 5 centroid is now closest to src. 6
[Mon Jul 22 00:12:54 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:54 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:12:54 2013] Source does appear to be extended
[Mon Jul 22 00:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:00 2013] Counts = 1001.960000, rescaling region sizes by 2.000000
[Mon Jul 22 00:15:00 2013] XMMSAS src. selection expression = ellipse(19558.948000, 41958.932000, 1367.904039, 1367.904039, 0.000000, X, Y)
[Mon Jul 22 00:15:00 2013] Not overwriting source region fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src3_src.reg
[Mon Jul 22 00:15:00 2013] Extracting stamp from image fullrun_mos1_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (147, 404) - (304, 561)
[Mon Jul 22 00:15:00 2013] XMMSAS bgd. selection expression = annulus(19558.948000, 41958.932000, 4559.680131, 9119.360262, X, Y) && !ellipse(19292.531316, 40921.264196, 2096.712060, 1110.891559, 305.858011, X, Y) && !ellipse(19715.166000, 42336.197000, 2202.520063, 836.920024, 113.621300, X, Y) && !ellipse(19890.192000, 42651.688000, 2177.824063, 2177.824063, 0.000000, X, Y) && !ellipse(19113.995800, 40427.976000, 1391.656040, 1391.656040, 0.000000, X, Y) && !ellipse(26990.995392, 41341.131378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20282.766000, 43209.646000, 1640.944047, 1640.944047, 0.000000, X, Y) && !ellipse(18822.075592, 33364.879089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18890.989532, 39104.741791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19185.720000, 41293.180000, 1823.872052, 1823.872052, 0.000000, X, Y) && !ellipse(18759.678421, 34581.371033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18676.963638, 38408.210785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18839.559047, 36059.763253, 1476.296042, 766.596196, 90.000000, X, Y) && !ellipse(18941.273132, 37618.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18692.502600, 33582.316000, 1585.088046, 1585.088046, 0.000000, X, Y) && !ellipse(18695.081800, 32493.325400, 744.210421, 744.210421, 0.000000, X, Y) && !ellipse(18740.977140, 34106.024000, 1750.544050, 1750.544050, 0.000000, X, Y) && !ellipse(18854.705902, 32104.701294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19472.676000, 32760.640000, 937.792027, 937.792027, 0.000000, X, Y) && !ellipse(19344.568100, 38572.227875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19993.748500, 34066.393800, 1300.168037, 1300.168037, 0.000000, X, Y) && !ellipse(20852.164093, 41193.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20692.582230, 34134.574738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18101.778860, 36644.879000, 1912.672055, 503.523214, 95.952690, X, Y) && !ellipse(22374.775604, 34141.939789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19531.062668, 37189.982452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21106.144196, 33989.238434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27603.322144, 32998.798340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.424072, 38839.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18059.332400, 35929.961000, 370.165611, 370.165611, 0.000000, X, Y) && !ellipse(21673.801407, 43856.532684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18235.103043, 35448.426605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19725.459930, 35012.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23307.654663, 34924.363647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.446075, 34603.102448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.964661, 37869.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.083038, 36057.814240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22749.054000, 34650.940000, 934.136027, 934.136027, 0.000000, X, Y) && !ellipse(20349.644043, 37179.420746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.528000, 31368.976000, 2523.776073, 2523.776073, 0.000000, X, Y) && !ellipse(18235.474747, 34756.515350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28305.898651, 36925.599945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23334.069550, 33965.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21528.758484, 39717.796021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28813.003937, 32498.447449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21045.885651, 35703.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19888.814800, 33925.858000, 1685.504048, 1685.504048, 0.000000, X, Y) && !ellipse(27010.369141, 35625.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.055389, 36934.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20849.749344, 34938.307861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21734.945404, 35598.226013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.833771, 35312.807709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24990.534363, 38313.920074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.342346, 37187.672577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28475.616089, 38054.587433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20456.340378, 35369.083710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20453.253906, 39455.009186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.994690, 36837.529968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.731293, 36483.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25384.471680, 38875.129547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23305.320892, 38376.666382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.448000, 40584.810000, 2094.472060, 2094.472060, 0.000000, X, Y) && !ellipse(22457.933777, 44035.457764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.264008, 34572.232422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20718.139542, 36322.488800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.763489, 33606.800049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25172.695923, 34919.858063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22166.155350, 42673.260468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.481720, 37356.606781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22039.744095, 35555.615448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21604.798523, 34657.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21391.189468, 39188.144226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25129.806580, 37899.592133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25558.949585, 38490.989288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22495.398895, 40401.075775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29171.523163, 37370.577545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.168716, 41624.895599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24250.556458, 38322.532990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.211884, 36498.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22541.070709, 32586.209442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28540.945740, 36338.233124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22992.531891, 41531.613800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20898.635071, 32846.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27510.512939, 34046.393250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26418.613556, 38326.725281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.369904, 34060.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23949.157532, 37641.791443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.840332, 38148.349792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21594.362930, 38232.779724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23051.460266, 32900.312683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22963.007965, 39970.889343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21276.370071, 32400.532623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29238.116608, 39188.247772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22527.957520, 38690.987335, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:00 2013] Writing fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src3.gif