[Mon Jul 22 00:07:07 2013] Detection parameters:
  Position = (326.0, 309.0) = 15 3 28.06 -42 4 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 777.4 +/- 46.8
  Background counts = 377.9
  Rate = 0.01 +/- 0.0007

[Mon Jul 22 00:07:10 2013] Off-axis axis estimate = 2.14'
[Mon Jul 22 00:09:39 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:39 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Mon Jul 22 00:09:39 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Mon Jul 22 00:09:39 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 7.50"
[Mon Jul 22 00:09:41 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src45.ximg exists
[Mon Jul 22 00:09:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src45.csv
[Mon Jul 22 00:09:41 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon Jul 22 00:09:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src45.csv
[Mon Jul 22 00:09:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon Jul 22 00:09:42 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Mon Jul 22 00:10:33 2013] Spatial fit model total counts = 6612.790000, observed total counts = 6592.000000
[Mon Jul 22 00:10:33 2013] Offset between fit and detection position for source 240 = 0.352634 pixels
[Mon Jul 22 00:10:33 2013] 6501.867000 total counts/ 5812.880000 bgd. counts: snr = 9.036814
Spatial fit parameters:
  Offset between fit and detection position for source 240 = 0.352634 pixels
  Position = (326.4, 309.1) = 15 3 27.93 -42 4 28.3
  Extent = 11.2 (8.9-14.2)", rotation angle = 0
  Source counts = 689.0 +/- 80.6
  Background counts = 5812.9
  Rate = 0.01 +/- 0.001
[Mon Jul 22 00:10:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:34 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:10:34 2013] Source does appear to be extended
[Mon Jul 22 00:10:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:12:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:00 2013] Initial guess for spatial extent in simple fitting = 11.18"
[Mon Jul 22 00:12:00 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Mon Jul 22 00:12:00 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 11.18"
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src44.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src44.csv
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src44_1.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src44.csv
[Mon Jul 22 00:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Mon Jul 22 00:12:03 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Mon Jul 22 00:12:53 2013] Warning, spatial fit 44 centroid is now closest to src. 256
[Mon Jul 22 00:12:54 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:54 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:12:54 2013] Source does appear to be extended
[Mon Jul 22 00:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:05 2013] XMMSAS src. selection expression = ellipse(28346.582800, 26844.505400, 671.028019, 671.028019, 0.000000, X, Y)
[Mon Jul 22 00:15:05 2013] Not overwriting source region fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src240_src.reg
[Mon Jul 22 00:15:05 2013] Extracting stamp from image fullrun_mos1_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (288, 271) - (365, 348)
[Mon Jul 22 00:15:05 2013] XMMSAS bgd. selection expression = annulus(28346.582800, 26844.505400, 1118.380032, 2236.760064, X, Y) && !ellipse(29076.919320, 25742.692200, 719.445621, 719.445621, 0.000000, X, Y) && !ellipse(26333.911800, 25478.862200, 656.804019, 656.804019, 0.000000, X, Y) && !ellipse(24743.474000, 26750.984000, 2207.424064, 2207.424064, 0.000000, X, Y) && !ellipse(25449.308000, 23555.246000, 1164.512034, 1164.512034, 0.000000, X, Y) && !ellipse(26814.441254, 24765.916229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25362.126000, 28261.971200, 1177.240034, 1177.240034, 0.000000, X, Y) && !ellipse(26710.296600, 28777.491200, 1229.000035, 1229.000035, 0.000000, X, Y) && !ellipse(31341.601600, 29656.462600, 1007.816029, 1007.816029, 0.000000, X, Y) && !ellipse(28979.121155, 24773.302521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29615.027800, 30455.270000, 1423.912041, 1423.912041, 0.000000, X, Y) && !ellipse(26873.244800, 24289.152000, 1125.856032, 1125.856032, 0.000000, X, Y) && !ellipse(26153.904480, 27720.071747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25801.414825, 23843.853760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25724.852000, 23019.760000, 2329.024067, 2329.024067, 0.000000, X, Y) && !ellipse(27290.145508, 26232.044647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.197845, 24368.275146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.490540, 26488.459412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26330.793152, 23878.897491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31396.212036, 25786.528076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30665.322296, 26283.772583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.261658, 28323.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26828.016418, 25964.587616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27337.030670, 25806.252289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.716064, 25708.326843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27934.521118, 27849.998260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30463.096680, 29874.659882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.074951, 28765.696625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.690521, 28335.911102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28802.604187, 27562.137329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.595917, 28852.778931, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:05 2013] Writing fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src240.gif