[Mon Jul 22 00:06:56 2013] Detection parameters:
  Position = (232.7, 497.9) = 15 4 4.44 -41 50 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1740.8 +/- 57.8
  Background counts = 110.3
  Rate = 0.03 +/- 0.0009

[Mon Jul 22 00:07:10 2013] Off-axis axis estimate = 15.23'
[Mon Jul 22 00:09:39 2013] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 22 00:09:39 2013] Initial guess for spatial extent in simple fitting = 14.04"
[Mon Jul 22 00:09:39 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.007
[Mon Jul 22 00:09:39 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 14.04"
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jul 22 00:09:40 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src10 appears to have run properly
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jul 22 00:09:42 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jul 22 00:10:33 2013] Spatial fit model total counts = 10954.000000, observed total counts = 11101.000000
[Mon Jul 22 00:10:33 2013] Offset between fit and detection position for source 18 = 1.425040 pixels
[Mon Jul 22 00:10:33 2013] Warning, changing simple spatial fit ID from 10 to 3
[Mon Jul 22 00:10:33 2013] 10635.190000 total counts/ 3191.780000 bgd. counts: snr = 131.751469
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.425040 pixels
  Position = (232.4, 496.5) = 15 4 4.54 -41 50 52.9
  Extent = 27.8 (27.8-55.6)", rotation angle = 0
  Source counts = 7443.4 +/- 103.1
  Background counts = 3191.8
  Rate = 0.1 +/- 0.002
[Mon Jul 22 00:10:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:34 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:10:34 2013] Source does appear to be extended
[Mon Jul 22 00:10:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:34 2013] Source is confused with source 5
[Mon Jul 22 00:12:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 22 00:12:00 2013] Initial guess for spatial extent in simple fitting = 27.82"
[Mon Jul 22 00:12:00 2013] source mask rpix=6.4, npix_max = 190, mask sum = 162, frac = 0.852
[Mon Jul 22 00:12:00 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 27.82"
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src10.csv
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src10.csv
[Mon Jul 22 00:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jul 22 00:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jul 22 00:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jul 22 00:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:53 2013] Spatial fit model total counts = 18242.300000, observed total counts = 18372.000000
[Mon Jul 22 00:12:53 2013] Offset between fit and detection position for source 18 = 1.431783 pixels
[Mon Jul 22 00:12:53 2013] Warning, changing simple spatial fit ID from 10 to 2
[Mon Jul 22 00:12:53 2013] 9777.980000 total counts/ 5662.280000 bgd. counts: snr = 54.695052
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.431783 pixels
  Position = (233.7, 497.2) = 15 4 4.05 -41 50 49.9
  Extent = 20.5 (20.5-20.5)", rotation angle = 0
  Source counts = 4115.7 +/- 98.9
  Background counts = 5662.3
  Rate = 0.06 +/- 0.002
[Mon Jul 22 00:12:54 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:54 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:12:54 2013] Source does appear to be extended
[Mon Jul 22 00:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:01 2013] Counts = 4115.700000, rescaling region sizes by 2.000000
[Mon Jul 22 00:15:01 2013] XMMSAS src. selection expression = ellipse(20282.766000, 43209.646000, 2461.416071, 2461.416071, 0.000000, X, Y)
[Mon Jul 22 00:15:01 2013] Not overwriting source region fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src18_src.reg
[Mon Jul 22 00:15:01 2013] Extracting stamp from image fullrun_mos1_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (92, 356) - (375, 595)
[Mon Jul 22 00:15:01 2013] XMMSAS bgd. selection expression = annulus(20282.766000, 43209.646000, 8204.720236, 16409.440472, X, Y) && !ellipse(19292.531316, 40921.264196, 2096.712060, 1110.891559, 305.858011, X, Y) && !ellipse(19715.166000, 42336.197000, 2202.520063, 836.920024, 113.621300, X, Y) && !ellipse(19890.192000, 42651.688000, 2177.824063, 2177.824063, 0.000000, X, Y) && !ellipse(19113.995800, 40427.976000, 1391.656040, 1391.656040, 0.000000, X, Y) && !ellipse(19558.948000, 41958.932000, 911.936026, 911.936026, 0.000000, X, Y) && !ellipse(33191.553467, 32752.703674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32509.034380, 28335.626200, 607.854417, 607.854417, 0.000000, X, Y) && !ellipse(26990.995392, 41341.131378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23699.115680, 27665.755200, 711.625620, 711.625620, 0.000000, X, Y) && !ellipse(18822.075592, 33364.879089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18890.989532, 39104.741791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19185.720000, 41293.180000, 1823.872052, 1823.872052, 0.000000, X, Y) && !ellipse(18759.678421, 34581.371033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18676.963638, 38408.210785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23687.174020, 28271.194400, 523.510415, 523.510415, 0.000000, X, Y) && !ellipse(18839.559047, 36059.763253, 1476.296042, 766.596196, 90.000000, X, Y) && !ellipse(21023.849200, 30999.312000, 1476.296042, 1476.296042, 0.000000, X, Y) && !ellipse(24360.933000, 26707.726000, 1019.352029, 1019.352029, 0.000000, X, Y) && !ellipse(18941.273132, 37618.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18692.502600, 33582.316000, 1585.088046, 1585.088046, 0.000000, X, Y) && !ellipse(18695.081800, 32493.325400, 744.210421, 744.210421, 0.000000, X, Y) && !ellipse(18871.044952, 31014.349792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18740.977140, 34106.024000, 1750.544050, 1750.544050, 0.000000, X, Y) && !ellipse(24777.497000, 29902.816400, 1276.160037, 902.696026, 189.978000, X, Y) && !ellipse(21969.361000, 27655.352000, 1293.704037, 1293.704037, 0.000000, X, Y) && !ellipse(18854.705902, 32104.701294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19472.676000, 32760.640000, 937.792027, 937.792027, 0.000000, X, Y) && !ellipse(19025.728287, 30493.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24423.772400, 27711.572000, 1186.928034, 1186.928034, 0.000000, X, Y) && !ellipse(19344.568100, 38572.227875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20548.424000, 28691.195000, 1804.176052, 896.696026, 347.590000, X, Y) && !ellipse(37652.316711, 25909.524618, 1804.176052, 1161.398338, 52.373054, X, Y) && !ellipse(19993.748500, 34066.393800, 1300.168037, 1300.168037, 0.000000, X, Y) && !ellipse(20852.164093, 41193.333862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20692.582230, 34134.574738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28346.582800, 26844.505400, 894.704026, 894.704026, 0.000000, X, Y) && !ellipse(23618.880000, 28341.398000, 1281.520037, 892.792026, 230.842000, X, Y) && !ellipse(21738.626000, 27655.352000, 688.704020, 688.704020, 0.000000, X, Y) && !ellipse(24743.474000, 26750.984000, 2207.424064, 2207.424064, 0.000000, X, Y) && !ellipse(18101.778860, 36644.879000, 1912.672055, 503.523214, 95.952690, X, Y) && !ellipse(22374.775604, 34141.939789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.828796, 33826.384247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23588.218200, 25422.058000, 2378.480068, 1509.400043, -0.000000, X, Y) && !ellipse(37535.845154, 26834.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23883.703400, 30234.943800, 1348.448039, 1348.448039, 0.000000, X, Y) && !ellipse(20384.099686, 31940.174438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19531.062668, 37189.982452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36100.310638, 26668.966888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21106.144196, 33989.238434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27603.322144, 32998.798340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.424072, 38839.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.686200, 30569.074000, 617.760818, 617.760818, 0.000000, X, Y) && !ellipse(19954.756226, 30434.836548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21219.030731, 30072.759583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.981200, 26604.624400, 726.484021, 726.484021, 0.000000, X, Y) && !ellipse(23459.258000, 30583.536000, 1424.016041, 1424.016041, 0.000000, X, Y) && !ellipse(18059.332400, 35929.961000, 370.165611, 370.165611, 0.000000, X, Y) && !ellipse(21673.801407, 43856.532684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18235.103043, 35448.426605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19725.459930, 35012.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22200.881600, 26366.911600, 858.536025, 858.536025, 0.000000, X, Y) && !ellipse(23307.654663, 34924.363647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.446075, 34603.102448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25362.126000, 28261.971200, 1177.240034, 1177.240034, 0.000000, X, Y) && !ellipse(35443.692000, 28801.522400, 1652.928048, 1652.928048, 0.000000, X, Y) && !ellipse(26710.296600, 28777.491200, 1229.000035, 1229.000035, 0.000000, X, Y) && !ellipse(36935.580200, 26831.114838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.964661, 37869.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29816.623596, 32437.703033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.083038, 36057.814240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22749.054000, 34650.940000, 934.136027, 934.136027, 0.000000, X, Y) && !ellipse(31341.601600, 29656.462600, 1007.816029, 1007.816029, 0.000000, X, Y) && !ellipse(20349.644043, 37179.420746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.528000, 31368.976000, 2523.776073, 2523.776073, 0.000000, X, Y) && !ellipse(22067.332504, 26919.585724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29615.027800, 30455.270000, 1423.912041, 1423.912041, 0.000000, X, Y) && !ellipse(19755.891200, 28516.383200, 937.816027, 937.816027, 0.000000, X, Y) && !ellipse(18235.474747, 34756.515350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29991.805084, 35771.392334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28305.898651, 36925.599945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26153.904480, 27720.071747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22179.589798, 29092.400635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17802.049179, 29103.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20499.666473, 28075.954529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34244.937790, 28421.468479, 1749.981810, 799.913908, 88.941870, X, Y) && !ellipse(23334.069550, 33965.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21528.758484, 39717.796021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27290.145508, 26232.044647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28813.003937, 32498.447449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34580.242645, 27278.983765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19459.167130, 31596.180878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32898.156799, 30165.313904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21045.885651, 35703.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19888.814800, 33925.858000, 1685.504048, 1685.504048, 0.000000, X, Y) && !ellipse(27010.369141, 35625.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25045.055389, 36934.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16053.230499, 30838.408966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.490540, 26488.459412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20849.749344, 34938.307861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21951.897141, 29691.277008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36571.915527, 26749.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21734.945404, 35598.226013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.833771, 35312.807709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24990.534363, 38313.920074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.342346, 37187.672577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29958.452606, 34997.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28475.616089, 38054.587433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30665.322296, 26283.772583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.261658, 28323.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20456.340378, 35369.083710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20453.253906, 39455.009186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32326.651123, 32223.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31522.079010, 31376.713501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24294.308685, 26234.041229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.994690, 36837.529968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20440.000000, 30224.563538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.731293, 36483.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30304.705597, 31957.195831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21122.690338, 29335.537598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36495.461304, 27431.026672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26828.016418, 25964.587616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21361.478363, 26831.744080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25384.471680, 38875.129547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23305.320892, 38376.666382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.448000, 40584.810000, 2094.472060, 2094.472060, 0.000000, X, Y) && !ellipse(31204.561401, 32443.676849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22457.933777, 44035.457764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.264008, 34572.232422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22114.809738, 30415.701752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20718.139542, 36322.488800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.763489, 33606.800049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28956.834839, 31515.104248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25172.695923, 34919.858063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22166.155350, 42673.260468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.481720, 37356.606781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29376.956055, 31061.986328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22039.744095, 35555.615448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32550.029358, 29007.638824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21604.798523, 34657.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21391.189468, 39188.144226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25129.806580, 37899.592133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30700.525330, 30498.230682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37145.566467, 30049.440460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.007965, 29037.441528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.740479, 28911.569244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36316.764557, 39275.736298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30250.338562, 36462.050415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25558.949585, 38490.989288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22495.398895, 40401.075775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29171.523163, 37370.577545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20067.600281, 29582.574799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33052.326385, 32124.361786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.168716, 41624.895599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32487.537933, 32744.619110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33307.849060, 34546.401642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24250.556458, 38322.532990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.211884, 36498.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22541.070709, 32586.209442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28540.945740, 36338.233124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22992.531891, 41531.613800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36587.535065, 34929.817078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20898.635071, 32846.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27510.512939, 34046.393250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30980.030884, 30914.042786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31911.064697, 40407.939026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26418.613556, 38326.725281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.165802, 29945.780151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.369904, 34060.300293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23949.157532, 37641.791443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.840332, 38148.349792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21594.362930, 38232.779724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36407.062103, 38147.404602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27934.521118, 27849.998260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32829.415436, 31279.088074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33918.155334, 29506.670166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23051.460266, 32900.312683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.784912, 40384.973022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30463.096680, 29874.659882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11674.935852, 29641.598755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35669.598511, 38787.449860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.074951, 28765.696625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.690521, 28335.911102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32336.846436, 40841.274323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22963.007965, 39970.889343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21276.370071, 32400.532623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29238.116608, 39188.247772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28802.604187, 27562.137329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.595917, 28852.778931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22527.957520, 38690.987335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36311.746552, 38660.714691, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:01 2013] Writing fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src18.gif