[Mon Jul 22 00:07:03 2013] Detection parameters:
  Position = (217.3, 369.6) = 15 4 10.52 -42 0 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 536.8 +/- 34.0
  Background counts = 128.1
  Rate = 0.02 +/- 0.001

[Mon Jul 22 00:07:10 2013] Off-axis axis estimate = 7.82'
[Mon Jul 22 00:09:39 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:39 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Mon Jul 22 00:09:39 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.815
[Mon Jul 22 00:09:39 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.34"
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src29.ximg exists
[Mon Jul 22 00:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src29.csv
[Mon Jul 22 00:09:40 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Jul 22 00:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src29.csv
[Mon Jul 22 00:09:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Jul 22 00:09:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jul 22 00:09:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Jul 22 00:09:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:10:33 2013] Source 163 is offset by 9.521401 and 2.333854 pixels which is larger than
2 X fitted extent = 9.243173 x 9.243173, not incorporating fit results
[Mon Jul 22 00:10:33 2013] Warning, spatial fit 29 centroid is now closest to src. 159
[Mon Jul 22 00:10:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:34 2013] Assessing source extent using major
[Mon Jul 22 00:10:34 2013] Source does appear to be extended
[Mon Jul 22 00:10:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:34 2013] Source is confused with source 31
[Mon Jul 22 00:12:00 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:00 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Mon Jul 22 00:12:00 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.815
[Mon Jul 22 00:12:00 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 10.34"
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src29.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src29.csv
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src29.csv
[Mon Jul 22 00:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Jul 22 00:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Jul 22 00:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon Jul 22 00:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:53 2013] Source 163 is offset by 9.521401 and 2.333854 pixels which is larger than
2 X fitted extent = 9.243173 x 9.243173, not incorporating fit results
[Mon Jul 22 00:12:53 2013] Spatial fit model total counts = 4182.700000, observed total counts = 3737.000000
[Mon Jul 22 00:12:53 2013] Poor agreement between spatial fit and data for source 163
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 22 00:12:54 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:54 2013] Assessing source extent using major
[Mon Jul 22 00:12:54 2013] Source does appear to be extended
[Mon Jul 22 00:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:04 2013] XMMSAS src. selection expression = ellipse(18854.705902, 32104.701294, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 22 00:15:04 2013] Not overwriting source region fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src163_src.reg
[Mon Jul 22 00:15:04 2013] Extracting stamp from image fullrun_mos1_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (180, 332) - (255, 407)
[Mon Jul 22 00:15:04 2013] XMMSAS bgd. selection expression = annulus(18854.705902, 32104.701294, 1087.500000, 2175.000000, X, Y) && !ellipse(18822.075592, 33364.879089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18759.678421, 34581.371033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21023.849200, 30999.312000, 1476.296042, 1476.296042, 0.000000, X, Y) && !ellipse(18692.502600, 33582.316000, 1585.088046, 1585.088046, 0.000000, X, Y) && !ellipse(18695.081800, 32493.325400, 744.210421, 744.210421, 0.000000, X, Y) && !ellipse(18871.044952, 31014.349792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18740.977140, 34106.024000, 1750.544050, 1750.544050, 0.000000, X, Y) && !ellipse(19472.676000, 32760.640000, 937.792027, 937.792027, 0.000000, X, Y) && !ellipse(19025.728287, 30493.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20548.424000, 28691.195000, 1804.176052, 896.696026, 347.590000, X, Y) && !ellipse(19993.748500, 34066.393800, 1300.168037, 1300.168037, 0.000000, X, Y) && !ellipse(20692.582230, 34134.574738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20384.099686, 31940.174438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21106.144196, 33989.238434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19954.756226, 30434.836548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21219.030731, 30072.759583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19725.459930, 35012.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.528000, 31368.976000, 2523.776073, 2523.776073, 0.000000, X, Y) && !ellipse(18235.474747, 34756.515350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17802.049179, 29103.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19459.167130, 31596.180878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19888.814800, 33925.858000, 1685.504048, 1685.504048, 0.000000, X, Y) && !ellipse(16053.230499, 30838.408966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20849.749344, 34938.307861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20440.000000, 30224.563538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21122.690338, 29335.537598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21604.798523, 34657.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20067.600281, 29582.574799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20898.635071, 32846.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.165802, 29945.780151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21276.370071, 32400.532623, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:04 2013] Writing fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src163.gif