[Mon Jul 22 00:07:02 2013] Detection parameters:
  Position = (341.3, 389.4) = 15 3 22.14 -41 58 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 470.8 +/- 30.7
  Background counts = 372.8
  Rate = 0.01 +/- 0.0007

[Mon Jul 22 00:07:10 2013] Off-axis axis estimate = 7.29'
[Mon Jul 22 00:09:39 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:39 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Mon Jul 22 00:09:39 2013] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.599
[Mon Jul 22 00:09:39 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 10.07"
[Mon Jul 22 00:09:41 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src55.ximg exists
[Mon Jul 22 00:09:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src55.csv
[Mon Jul 22 00:09:41 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Jul 22 00:09:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src55.csv
[Mon Jul 22 00:09:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:09:43 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Jul 22 00:09:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src55.csv
[Mon Jul 22 00:09:43 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Jul 22 00:09:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src55.csv
[Mon Jul 22 00:09:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:10:33 2013] Warning, spatial fit 55 centroid is now closest to src. 156
[Mon Jul 22 00:10:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:34 2013] Assessing source extent using major
[Mon Jul 22 00:10:34 2013] Source does appear to be extended
[Mon Jul 22 00:10:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:12:00 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:00 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Mon Jul 22 00:12:00 2013] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.599
[Mon Jul 22 00:12:00 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 10.07"
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src54.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src54.csv
[Mon Jul 22 00:12:01 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon Jul 22 00:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src54.csv
[Mon Jul 22 00:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon Jul 22 00:12:03 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon Jul 22 00:12:03 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Mon Jul 22 00:12:53 2013] Spatial fit model total counts = 4145.620000, observed total counts = 3732.000000
[Mon Jul 22 00:12:53 2013] Poor agreement between spatial fit and data for source 140
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 22 00:12:54 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:54 2013] Assessing source extent using major
[Mon Jul 22 00:12:54 2013] Source does appear to be extended
[Mon Jul 22 00:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:06 2013] XMMSAS src. selection expression = ellipse(29640.828796, 33826.384247, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 22 00:15:06 2013] Not overwriting source region fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src140_src.reg
[Mon Jul 22 00:15:06 2013] Extracting stamp from image fullrun_mos1_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (304, 352) - (379, 427)
[Mon Jul 22 00:15:06 2013] XMMSAS bgd. selection expression = annulus(29640.828796, 33826.384247, 1087.500000, 2175.000000, X, Y) && !ellipse(27603.322144, 32998.798340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.446075, 34603.102448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29816.623596, 32437.703033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29615.027800, 30455.270000, 1423.912041, 1423.912041, 0.000000, X, Y) && !ellipse(29991.805084, 35771.392334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28813.003937, 32498.447449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.369141, 35625.118805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29958.452606, 34997.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32326.651123, 32223.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31522.079010, 31376.713501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.994690, 36837.529968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.731293, 36483.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30304.705597, 31957.195831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31204.561401, 32443.676849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.264008, 34572.232422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.763489, 33606.800049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28956.834839, 31515.104248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29376.956055, 31061.986328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30250.338562, 36462.050415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32487.537933, 32744.619110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28540.945740, 36338.233124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27510.512939, 34046.393250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30980.030884, 30914.042786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.369904, 34060.300293, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:06 2013] Writing fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src140.gif