[Mon Jul 22 00:07:01 2013] Detection parameters:
  Position = (259.2, 401.0) = 15 3 54.16 -41 57 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.9 +/- 31.7
  Background counts = 283.1
  Rate = 0.008 +/- 0.0008

[Mon Jul 22 00:07:10 2013] Off-axis axis estimate = 7.96'
[Mon Jul 22 00:09:39 2013] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:09:39 2013] Initial guess for spatial extent in simple fitting = 10.41"
[Mon Jul 22 00:09:39 2013] source mask rpix=2.4, npix_max = 33, mask sum = 31, frac = 0.926
[Mon Jul 22 00:09:39 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 10.41"
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src95.ximg exists
[Mon Jul 22 00:09:42 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src95_1.ximg exists
[Mon Jul 22 00:09:42 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_src95 appears to have run properly
[Mon Jul 22 00:09:43 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Mon Jul 22 00:09:43 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Mon Jul 22 00:09:43 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Mon Jul 22 00:10:33 2013] Spatial fit model total counts = 4013.710000, observed total counts = 4015.000000
[Mon Jul 22 00:10:33 2013] Offset between fit and detection position for source 120 = 3.589299 pixels
[Mon Jul 22 00:10:33 2013] Warning, changing simple spatial fit ID from 95 to 54
[Mon Jul 22 00:10:33 2013] 3970.471000 total counts/ 3704.860000 bgd. counts: snr = 4.363753
Spatial fit parameters:
  Offset between fit and detection position for source 120 = 3.589299 pixels
  Position = (262.0, 398.8) = 15 3 53.08 -41 57 58.3
  Extent = 11.1 (8.0-20.3)", rotation angle = 0
  Source counts = 265.6 +/- 63.0
  Background counts = 3704.9
  Rate = 0.004 +/- 0.001
[Mon Jul 22 00:10:34 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:10:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:10:34 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:10:34 2013] Source does appear to be extended
[Mon Jul 22 00:10:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:10:34 2013] Source is confused with source 137
[Mon Jul 22 00:12:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 22 00:12:00 2013] Initial guess for spatial extent in simple fitting = 11.12"
[Mon Jul 22 00:12:00 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.964
[Mon Jul 22 00:12:00 2013] Giving source the simple spatial ID 91 for pass 1, mean size = 11.12"
[Mon Jul 22 00:12:02 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src91.ximg exists
[Mon Jul 22 00:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src91.csv
[Mon Jul 22 00:12:02 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src91_1.ximg exists
[Mon Jul 22 00:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src91.csv
[Mon Jul 22 00:12:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 22 00:12:04 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Mon Jul 22 00:12:04 2013] fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Mon Jul 22 00:12:04 2013] Fit fullrun_mos1_xmm0555631001_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Mon Jul 22 00:12:53 2013] Spatial fit model total counts = 4014.470000, observed total counts = 4015.000000
[Mon Jul 22 00:12:53 2013] Offset between fit and detection position for source 120 = 0.110731 pixels
[Mon Jul 22 00:12:53 2013] Warning, changing simple spatial fit ID from 91 to 53
[Mon Jul 22 00:12:53 2013] 3967.140000 total counts/ 3684.500000 bgd. counts: snr = 4.656336
Spatial fit parameters:
  Offset between fit and detection position for source 120 = 0.110731 pixels
  Position = (262.0, 398.8) = 15 3 53.05 -41 57 58.0
  Extent = 11.7 (8.0-20.3)", rotation angle = 0
  Source counts = 282.6 +/- 63.0
  Background counts = 3684.5
  Rate = 0.004 +/- 0.001
[Mon Jul 22 00:12:54 2013] Vigneting correction estimate = 1.000000
[Mon Jul 22 00:12:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 22 00:12:54 2013] Assessing source extent using major axis lower bound
[Mon Jul 22 00:12:54 2013] Source does appear to be extended
[Mon Jul 22 00:12:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 22 00:15:09 2013] XMMSAS src. selection expression = ellipse(22749.054000, 34650.940000, 700.602020, 700.602020, 0.000000, X, Y)
[Mon Jul 22 00:15:09 2013] Not overwriting source region fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src120_src.reg
[Mon Jul 22 00:15:09 2013] Extracting stamp from image fullrun_mos1_xmm0555631001_pi300-10000_cl_sm2.00.img.gz, (222, 359) - (302, 439)
[Mon Jul 22 00:15:10 2013] XMMSAS bgd. selection expression = annulus(22749.054000, 34650.940000, 1167.670034, 2335.340067, X, Y) && !ellipse(21023.849200, 30999.312000, 1476.296042, 1476.296042, 0.000000, X, Y) && !ellipse(18740.977140, 34106.024000, 1750.544050, 1750.544050, 0.000000, X, Y) && !ellipse(19993.748500, 34066.393800, 1300.168037, 1300.168037, 0.000000, X, Y) && !ellipse(20692.582230, 34134.574738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22374.775604, 34141.939789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20384.099686, 31940.174438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21106.144196, 33989.238434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19725.459930, 35012.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23307.654663, 34924.363647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.083038, 36057.814240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20349.644043, 37179.420746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22229.528000, 31368.976000, 2523.776073, 2523.776073, 0.000000, X, Y) && !ellipse(23334.069550, 33965.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21045.885651, 35703.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19888.814800, 33925.858000, 1685.504048, 1685.504048, 0.000000, X, Y) && !ellipse(25045.055389, 36934.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20849.749344, 34938.307861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21734.945404, 35598.226013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.833771, 35312.807709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.342346, 37187.672577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20456.340378, 35369.083710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20718.139542, 36322.488800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25172.695923, 34919.858063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.481720, 37356.606781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22039.744095, 35555.615448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21604.798523, 34657.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.211884, 36498.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22541.070709, 32586.209442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20898.635071, 32846.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23949.157532, 37641.791443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23051.460266, 32900.312683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21276.370071, 32400.532623, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 22 00:15:10 2013] Writing fullrun_mos1_xmm0555631001_pi300-10000_pass1_cl_src120.gif