[Thu Jun  6 19:27:08 2013] Detection parameters:
  Position = (356.2, 216.0) = 15 1 31.95 -41 56 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5355.4 +/- 102.2
  Background counts = 710.7
  Rate = 0.04 +/- 0.0008

[Thu Jun  6 19:27:32 2013] Off-axis axis estimate = 7.30'
[Thu Jun  6 19:30:31 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:31 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Thu Jun  6 19:30:31 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135
[Thu Jun  6 19:30:31 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.08"
[Thu Jun  6 19:30:33 2013] fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun  6 19:30:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_src9.csv
[Thu Jun  6 19:30:33 2013] fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun  6 19:30:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_src9.csv
[Thu Jun  6 19:30:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:30:36 2013] fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun  6 19:30:36 2013] fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun  6 19:30:36 2013] Fit fullrun_pn_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jun  6 19:31:21 2013] Warning, spatial fit 9 centroid is now closest to src. 18
[Thu Jun  6 19:31:21 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 10.257185 pixels away
[Thu Jun  6 19:31:23 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:31:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:31:23 2013] Assessing source extent using major
[Thu Jun  6 19:31:23 2013] Source does appear to be extended
[Thu Jun  6 19:31:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:31:23 2013] Source is confused with source 19
[Thu Jun  6 19:31:23 2013] Source is confused with source 29
[Thu Jun  6 19:33:13 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:13 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Thu Jun  6 19:33:13 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135
[Thu Jun  6 19:33:13 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.08"
[Thu Jun  6 19:33:14 2013] fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun  6 19:33:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_src9.csv
[Thu Jun  6 19:33:14 2013] fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun  6 19:33:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_src9.csv
[Thu Jun  6 19:33:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:33:17 2013] fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun  6 19:33:17 2013] fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun  6 19:33:17 2013] Fit fullrun_pn_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jun  6 19:34:04 2013] Spatial fit model total counts = 26790.000000, observed total counts = 26790.000000
[Thu Jun  6 19:34:04 2013] Offset between fit and detection position for source 14 = 0.854874 pixels
[Thu Jun  6 19:34:04 2013] 18254.620000 total counts/ 15911.800000 bgd. counts: snr = 18.572881
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.854874 pixels
  Position = (356.7, 216.6) = 15 1 31.72 -41 56 14.2
  Extent = 10.6 (9.5-12.5)", rotation angle = 0
  Source counts = 2342.8 +/- 135.1
  Background counts = 15911.8
  Rate = 0.02 +/- 0.001
[Thu Jun  6 19:34:05 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:05 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 19:34:05 2013] Source does appear to be extended
[Thu Jun  6 19:34:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:36:08 2013] Counts = 2342.820000, rescaling region sizes by 2.000000
[Thu Jun  6 19:36:08 2013] XMMSAS src. selection expression = ellipse(30987.223200, 18798.119000, 1274.628037, 1274.628037, 0.000000, X, Y)
[Thu Jun  6 19:36:08 2013] Not overwriting source region fullrun_pn_xmm0555630501_pi300-10000_pass1_cl_src14_src.reg
[Thu Jun  6 19:36:08 2013] Extracting stamp from image fullrun_pn_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (283, 143) - (430, 290)
[Thu Jun  6 19:36:08 2013] XMMSAS bgd. selection expression = annulus(30987.223200, 18798.119000, 4248.760122, 8497.520245, X, Y) && !ellipse(26457.627800, 27807.152420, 4407.672127, 4407.672127, 0.000000, X, Y) && !ellipse(25916.712128, 17321.041504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31212.395490, 16869.521510, 2321.648067, 1089.381526, 90.000000, X, Y) && !ellipse(30957.958000, 15120.346000, 5541.552159, 5541.552159, 0.000000, X, Y) && !ellipse(30818.952400, 14762.782000, 6964.944200, 3834.912110, 90.000000, X, Y) && !ellipse(26898.725159, 14118.080536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31059.252523, 15822.192943, 1768.024051, 897.450308, 110.693232, X, Y) && !ellipse(24441.992035, 26808.225830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30853.515400, 18295.822000, 1663.920048, 1663.920048, 0.000000, X, Y) && !ellipse(22417.909210, 27781.904724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20695.595000, 32113.395600, 9528.912274, 3424.392099, 215.751000, X, Y) && !ellipse(30938.307098, 19789.893509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30991.596400, 18299.990200, 1636.080047, 1162.824033, 89.966331, X, Y) && !ellipse(19427.554000, 32926.484000, 9283.920267, 9283.920267, 0.000000, X, Y) && !ellipse(28586.587860, 22891.773800, 1137.112033, 1137.112033, 0.000000, X, Y) && !ellipse(30832.002380, 20828.376358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30986.639252, 19264.245499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26554.489400, 17846.612000, 4737.960136, 2687.856077, 0.069397, X, Y) && !ellipse(23394.020111, 11705.325317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14226.040000, 35286.658000, 13023.960375, 13023.960375, 0.000000, X, Y) && !ellipse(24764.258000, 28764.654000, 1553.512045, 285.783208, 359.594226, X, Y) && !ellipse(28854.727722, 27085.753387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27893.407990, 27288.788788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22695.436768, 27228.662994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23808.881714, 27456.737976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22097.210876, 27036.776062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24616.151337, 27112.091278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.000000, 26325.589294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29269.345062, 26668.350922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33552.807373, 26319.079163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32600.790863, 26409.960815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24438.516602, 25957.753571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28658.805145, 25694.411835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22043.494324, 25865.663879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.280029, 25708.223297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27085.968445, 25966.557648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35682.398407, 25619.040863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34464.557709, 25101.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37530.404999, 25012.844574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28717.712280, 25083.561279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.820892, 25167.346039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23800.643158, 24593.565002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35653.981628, 24165.226471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29597.527924, 24470.605286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31963.650208, 24054.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28639.264130, 23959.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29864.443329, 23787.251190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26919.038788, 23695.838531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23904.871643, 24066.039886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.835052, 24561.917053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28136.536987, 23529.970886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.351318, 23437.137787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22781.881866, 23407.597931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26199.193970, 24224.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23796.485382, 23349.936005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27240.884094, 23264.611328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37418.901733, 23017.178528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26390.066681, 22743.251190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27702.431732, 22399.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30054.469086, 22576.085236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24867.088776, 22927.470398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25955.674683, 21602.335983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24054.217041, 22297.073517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29349.264099, 22407.992676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30065.431702, 21356.007675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28071.018829, 21093.139862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26002.652771, 21162.360458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.082886, 20639.023651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29263.219910, 20482.852173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22308.837952, 11606.904709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.178223, 21269.001038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.453918, 21611.787888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25528.302582, 20150.283203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27786.203217, 20224.708984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23198.198425, 20465.991409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24785.319183, 20137.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26268.992035, 20737.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28827.842896, 20225.717896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24542.158325, 19536.010315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29661.352173, 19712.263107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27853.529449, 19095.388290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22189.085510, 19170.880066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23115.319031, 19010.380890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.246216, 18744.423950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25577.062195, 19021.630249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22013.426117, 18387.134003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26748.224823, 18555.746948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.388458, 18661.415787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24821.085083, 18653.947189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28910.990448, 17617.093201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27664.679871, 17894.680496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21835.464813, 17872.813675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27876.705200, 17110.825577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37236.275543, 16935.170166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.288635, 16483.803238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28756.704041, 16134.495636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26909.961243, 16999.455063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.432861, 16137.729462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29067.355743, 14561.458481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.027679, 14471.045441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22157.210556, 14264.139008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.924011, 14042.179886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.184662, 13334.148621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22107.544250, 13258.006363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.003571, 12872.396545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.622864, 12808.387772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24063.273346, 12819.654388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22063.979202, 12652.253464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26178.729004, 12527.005112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23838.379089, 12321.452744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.972382, 12367.841415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24842.351868, 12083.305908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.686432, 11927.470291, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 19:36:08 2013] Writing fullrun_pn_xmm0555630501_pi300-10000_pass1_cl_src14.gif