[Thu Jun  6 19:27:57 2013] Detection parameters:
  Position = (254.4, 339.0) = 15 2 11.57 -41 47 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 457.0 +/- 41.1
  Background counts = 439.5
  Rate = 0.004 +/- 0.0004

[Thu Jun  6 19:28:14 2013] Off-axis axis estimate = 4.34'
[Thu Jun  6 19:30:43 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:43 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Thu Jun  6 19:30:43 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.815
[Thu Jun  6 19:30:43 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 8.60"
[Thu Jun  6 19:30:46 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src63.ximg exists
[Thu Jun  6 19:30:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src63.csv
[Thu Jun  6 19:30:46 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src63_1.ximg exists
[Thu Jun  6 19:30:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src63.csv
[Thu Jun  6 19:30:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:30:48 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Thu Jun  6 19:30:48 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Thu Jun  6 19:30:48 2013] Fit fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Thu Jun  6 19:32:03 2013] Spatial fit model total counts = 6544.200000, observed total counts = 6544.000000
[Thu Jun  6 19:32:03 2013] Offset between fit and detection position for source 83 = 1.796350 pixels
[Thu Jun  6 19:32:03 2013] 6589.013000 total counts/ 6112.830000 bgd. counts: snr = 6.090497
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 1.796350 pixels
  Position = (253.0, 337.9) = 15 2 12.14 -41 47 26.6
  Extent = 11.9 (8.0-17.2)", rotation angle = 0
  Source counts = 476.2 +/- 81.2
  Background counts = 6112.8
  Rate = 0.004 +/- 0.0006
[Thu Jun  6 19:32:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:32:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:32:03 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 19:32:03 2013] Source does appear to be extended
[Thu Jun  6 19:32:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:32:03 2013] Source is confused with source 74
[Thu Jun  6 19:33:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:26 2013] Initial guess for spatial extent in simple fitting = 11.88"
[Thu Jun  6 19:33:26 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.862
[Thu Jun  6 19:33:26 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 11.88"
[Thu Jun  6 19:33:28 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src62.ximg exists
[Thu Jun  6 19:33:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src62.csv
[Thu Jun  6 19:33:28 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src62_1.ximg exists
[Thu Jun  6 19:33:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src62.csv
[Thu Jun  6 19:33:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:33:30 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Thu Jun  6 19:33:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src62.csv
[Thu Jun  6 19:33:30 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Thu Jun  6 19:33:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src62.csv
[Thu Jun  6 19:33:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:34:49 2013] Warning, spatial fit 62 centroid is now closest to src. 74
[Thu Jun  6 19:34:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:49 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 19:34:49 2013] Source does appear to be extended
[Thu Jun  6 19:34:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:38:30 2013] XMMSAS src. selection expression = ellipse(21959.336200, 29351.706800, 712.938021, 712.938021, 0.000000, X, Y)
[Thu Jun  6 19:38:30 2013] Not overwriting source region fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src83_src.reg
[Thu Jun  6 19:38:30 2013] Extracting stamp from image fullrun_mos2_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (212, 297) - (294, 379)
[Thu Jun  6 19:38:30 2013] XMMSAS bgd. selection expression = annulus(21959.336200, 29351.706800, 1188.230034, 2376.460068, X, Y) && !ellipse(20859.601641, 32099.766144, 3063.280088, 1689.711709, 39.717915, X, Y) && !ellipse(21456.120000, 31355.724000, 2470.160071, 2470.160071, 0.000000, X, Y) && !ellipse(22799.194000, 30563.118000, 1417.592041, 766.840022, 228.307000, X, Y) && !ellipse(22260.892000, 30710.222000, 2069.216060, 1658.160048, 352.498430, X, Y) && !ellipse(19290.862000, 33026.700000, 1707.544049, 1707.544049, 0.000000, X, Y) && !ellipse(18786.098000, 33320.588000, 1746.552050, 1746.552050, 0.000000, X, Y) && !ellipse(23007.318000, 30332.600000, 1344.216039, 1344.216039, 0.000000, X, Y) && !ellipse(23136.144000, 29927.850000, 2644.256076, 2644.256076, 0.000000, X, Y) && !ellipse(23442.008000, 29998.076400, 1322.128038, 588.004817, 52.810700, X, Y) && !ellipse(24348.416000, 29218.438000, 1322.128038, 1322.128038, 0.000000, X, Y) && !ellipse(24910.392000, 28644.100000, 1257.240036, 1257.240036, 0.000000, X, Y) && !ellipse(17949.446759, 33821.030671, 3493.104101, 1841.044082, 32.002341, X, Y) && !ellipse(23751.476000, 28789.416000, 1182.936034, 1182.936034, 0.000000, X, Y) && !ellipse(23843.657288, 30688.967987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.472412, 31178.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.928400, 25832.085800, 1456.312042, 1456.312042, 0.000000, X, Y) && !ellipse(24137.182000, 31185.810000, 1375.488040, 1375.488040, 0.000000, X, Y) && !ellipse(23220.389160, 31697.555206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20258.579193, 26404.873779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21438.386597, 29788.198853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22351.249390, 27562.171844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24773.629089, 29698.222565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.067413, 30325.887421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23228.802948, 32367.318207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23842.669617, 28058.829590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19746.011185, 31380.196899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22999.896942, 29109.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.095306, 32547.783203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18835.375961, 29283.007843, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 19:38:30 2013] Writing fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src83.gif