[Thu Jun  6 19:27:56 2013] Detection parameters:
  Position = (256.2, 353.1) = 15 2 10.87 -41 46 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1294.0 +/- 54.5
  Background counts = 350.9
  Rate = 0.01 +/- 0.0006

[Thu Jun  6 19:28:14 2013] Off-axis axis estimate = 5.01'
[Thu Jun  6 19:30:43 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:43 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Thu Jun  6 19:30:43 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.959
[Thu Jun  6 19:30:43 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 8.93"
[Thu Jun  6 19:30:45 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src14.ximg exists
[Thu Jun  6 19:30:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src14.csv
[Thu Jun  6 19:30:45 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Jun  6 19:30:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src14.csv
[Thu Jun  6 19:30:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:30:47 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Jun  6 19:30:47 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Jun  6 19:30:47 2013] Fit fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Jun  6 19:32:02 2013] Spatial fit model total counts = 9440.970000, observed total counts = 9431.000000
[Thu Jun  6 19:32:02 2013] Offset between fit and detection position for source 70 = 3.023643 pixels
[Thu Jun  6 19:32:02 2013] 9187.880000 total counts/ 6020.870000 bgd. counts: snr = 40.815001
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 3.023643 pixels
  Position = (258.7, 351.3) = 15 2 9.92 -41 46 28.6
  Extent = 17.9 (17.8-35.7)", rotation angle = 0
  Source counts = 3167.0 +/- 95.9
  Background counts = 6020.9
  Rate = 0.02 +/- 0.0008
[Thu Jun  6 19:32:02 2013] Spatial fit model total counts = 8398.550000, observed total counts = 8385.000000
[Thu Jun  6 19:32:02 2013] Offset between fit and detection position for source 70 = 1.673678 pixels
[Thu Jun  6 19:32:02 2013] Warning, changing simple spatial fit ID from 14 to 21
[Thu Jun  6 19:32:02 2013] 8305.340000 total counts/ 5512.740000 bgd. counts: snr = 37.611875
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 1.673678 pixels
  Position = (259.1, 352.9) = 15 2 9.76 -41 46 21.6
  Extent = 17.2 (17.2-34.5)", rotation angle = 0
  Source counts = 2792.6 +/- 91.1
  Background counts = 5512.7
  Rate = 0.02 +/- 0.0007
[Thu Jun  6 19:32:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:32:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:32:03 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 19:32:03 2013] Source does appear to be extended
[Thu Jun  6 19:32:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:32:03 2013] Source is confused with source 58
[Thu Jun  6 19:32:03 2013] Source is confused with source 67
[Thu Jun  6 19:32:03 2013] Source is confused with source 78
[Thu Jun  6 19:33:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:26 2013] Initial guess for spatial extent in simple fitting = 17.24"
[Thu Jun  6 19:33:26 2013] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.016
[Thu Jun  6 19:33:26 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 17.24"
[Thu Jun  6 19:33:27 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun  6 19:33:27 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun  6 19:33:27 2013] Fit fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src13 appears to have run properly
[Thu Jun  6 19:33:29 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun  6 19:33:29 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun  6 19:33:29 2013] Fit fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jun  6 19:34:48 2013] Warning, spatial fit 13 centroid is now closest to src. 56
[Thu Jun  6 19:34:49 2013] Spatial fit model total counts = 5110.760000, observed total counts = 5107.000000
[Thu Jun  6 19:34:49 2013] Offset between fit and detection position for source 70 = 3.690161 pixels
[Thu Jun  6 19:34:49 2013] Warning, changing simple spatial fit ID from 13 to 86
[Thu Jun  6 19:34:49 2013] 5034.962000 total counts/ 4663.510000 bgd. counts: snr = 5.439340
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 3.690161 pixels
  Position = (262.6, 351.9) = 15 2 8.38 -41 46 26.1
  Extent = 17.7 (10.9-35.4)" x 9.6 (6.8-13.8)", rotation angle = 228 (23-88) degrees
  Source counts = 371.5 +/- 71.0
  Background counts = 4663.5
  Rate = 0.003 +/- 0.0006
[Thu Jun  6 19:34:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:49 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 19:34:49 2013] Source does appear to be extended
[Thu Jun  6 19:34:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Thu Jun  6 19:38:22 2013] XMMSAS src. selection expression = ellipse(22799.194000, 30563.118000, 1063.194031, 575.130017, 228.307000, X, Y)
[Thu Jun  6 19:38:22 2013] Not overwriting source region fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src70_src.reg
[Thu Jun  6 19:38:22 2013] Extracting stamp from image fullrun_mos2_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (202, 291) - (324, 413)
[Thu Jun  6 19:38:22 2013] XMMSAS bgd. selection expression = annulus(22799.194000, 30563.118000, 1771.990051, 3543.980102, X, Y) && !ellipse(26580.813540, 27612.062400, 1156.032033, 691.331220, 64.011200, X, Y) && !ellipse(20859.601641, 32099.766144, 3063.280088, 1689.711709, 39.717915, X, Y) && !ellipse(21456.120000, 31355.724000, 2470.160071, 2470.160071, 0.000000, X, Y) && !ellipse(22260.892000, 30710.222000, 2069.216060, 1658.160048, 352.498430, X, Y) && !ellipse(18206.250000, 33621.272000, 1782.840051, 1782.840051, 0.000000, X, Y) && !ellipse(19290.862000, 33026.700000, 1707.544049, 1707.544049, 0.000000, X, Y) && !ellipse(18786.098000, 33320.588000, 1746.552050, 1746.552050, 0.000000, X, Y) && !ellipse(23007.318000, 30332.600000, 1344.216039, 1344.216039, 0.000000, X, Y) && !ellipse(23136.144000, 29927.850000, 2644.256076, 2644.256076, 0.000000, X, Y) && !ellipse(23442.008000, 29998.076400, 1322.128038, 588.004817, 52.810700, X, Y) && !ellipse(24348.416000, 29218.438000, 1322.128038, 1322.128038, 0.000000, X, Y) && !ellipse(24910.392000, 28644.100000, 1257.240036, 1257.240036, 0.000000, X, Y) && !ellipse(17949.446759, 33821.030671, 3493.104101, 1841.044082, 32.002341, X, Y) && !ellipse(27115.067566, 26402.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20681.433762, 33066.788330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.336200, 29351.706800, 950.584027, 950.584027, 0.000000, X, Y) && !ellipse(23751.476000, 28789.416000, 1182.936034, 1182.936034, 0.000000, X, Y) && !ellipse(23843.657288, 30688.967987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.472412, 31178.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.928400, 25832.085800, 1456.312042, 1456.312042, 0.000000, X, Y) && !ellipse(24137.182000, 31185.810000, 1375.488040, 1375.488040, 0.000000, X, Y) && !ellipse(23220.389160, 31697.555206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20258.579193, 26404.873779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21438.386597, 29788.198853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22351.249390, 27562.171844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24773.629089, 29698.222565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.067413, 30325.887421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23228.802948, 32367.318207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.909729, 29272.979797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23842.669617, 28058.829590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19746.011185, 31380.196899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21085.456207, 33185.555756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22999.896942, 29109.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.095306, 32547.783203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.480316, 30742.267700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18835.375961, 29283.007843, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 19:38:22 2013] Writing fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src70.gif