[Thu Jun  6 19:27:55 2013] Detection parameters:
  Position = (240.0, 369.0) = 15 2 17.15 -41 45 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1315.3 +/- 54.0
  Background counts = 296.3
  Rate = 0.02 +/- 0.0006

[Thu Jun  6 19:28:14 2013] Off-axis axis estimate = 6.64'
[Thu Jun  6 19:30:43 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:43 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Thu Jun  6 19:30:43 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.198
[Thu Jun  6 19:30:43 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 9.75"
[Thu Jun  6 19:30:44 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jun  6 19:30:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src12.csv
[Thu Jun  6 19:30:44 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jun  6 19:30:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src12.csv
[Thu Jun  6 19:30:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:30:47 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jun  6 19:30:47 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jun  6 19:30:47 2013] Fit fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Jun  6 19:32:02 2013] Warning, spatial fit 12 centroid is now closest to src. 57
[Thu Jun  6 19:32:03 2013] Spatial fit model total counts = 4793.450000, observed total counts = 3300.000000
[Thu Jun  6 19:32:03 2013] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 19:32:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:32:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:32:03 2013] Assessing source extent using major
[Thu Jun  6 19:32:03 2013] Source does appear to be extended
[Thu Jun  6 19:32:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:32:03 2013] Source is confused with source 56
[Thu Jun  6 19:33:26 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:26 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Thu Jun  6 19:33:26 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.198
[Thu Jun  6 19:33:26 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.75"
[Thu Jun  6 19:33:26 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun  6 19:33:26 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun  6 19:33:26 2013] Fit fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu Jun  6 19:33:29 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun  6 19:33:29 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun  6 19:33:29 2013] Fit fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jun  6 19:34:48 2013] Warning, spatial fit 11 centroid is now closest to src. 37
[Thu Jun  6 19:34:48 2013] Spatial fit model total counts = 21194.400000, observed total counts = 21172.000000
[Thu Jun  6 19:34:48 2013] Offset between fit and detection position for source 52 = 0.568776 pixels
[Thu Jun  6 19:34:48 2013] Warning, changing simple spatial fit ID from 11 to 12
[Thu Jun  6 19:34:48 2013] 21029.680000 total counts/ 12592.400000 bgd. counts: snr = 75.187944
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.568776 pixels
  Position = (240.3, 369.5) = 15 2 17.04 -41 45 9.1
  Extent = 38.3" x 21.1", rotation angle = 40
  Source counts = 8437.3 +/- 145.0
  Background counts = 12592.4
  Rate = 0.07 +/- 0.001
[Thu Jun  6 19:34:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:49 2013] Assessing source extent using major
[Thu Jun  6 19:34:49 2013] Source does appear to be extended
[Thu Jun  6 19:34:49 2013] Computing asymmetry using major and minor axis, asym = 1.81
[Thu Jun  6 19:34:49 2013] Source is asymmetric
[Thu Jun  6 19:38:21 2013] Counts = 8437.280000, rescaling region sizes by 2.000000
[Thu Jun  6 19:38:21 2013] XMMSAS src. selection expression = ellipse(20859.601641, 32099.766144, 4594.920132, 2534.567563, 39.717915, X, Y)
[Thu Jun  6 19:38:21 2013] Not overwriting source region fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src52_src.reg
[Thu Jun  6 19:38:21 2013] Extracting stamp from image fullrun_mos2_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (0, 105) - (504, 595)
[Thu Jun  6 19:38:22 2013] XMMSAS bgd. selection expression = annulus(20859.601641, 32099.766144, 15316.400441, 30632.800881, X, Y) && !ellipse(31169.209686, 15961.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26580.813540, 27612.062400, 1156.032033, 691.331220, 64.011200, X, Y) && !ellipse(31252.997101, 16569.677505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28175.228729, 24811.301300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30943.123322, 17960.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30961.730200, 19646.333200, 1340.760039, 1340.760039, 0.000000, X, Y) && !ellipse(30655.976593, 14371.207047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30902.997864, 17438.440262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31021.040466, 15286.155365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30862.213800, 20761.238600, 1357.568039, 674.428019, 75.084200, X, Y) && !ellipse(21456.120000, 31355.724000, 2470.160071, 2470.160071, 0.000000, X, Y) && !ellipse(22799.194000, 30563.118000, 1417.592041, 766.840022, 228.307000, X, Y) && !ellipse(27342.988556, 10144.168091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22260.892000, 30710.222000, 2069.216060, 1658.160048, 352.498430, X, Y) && !ellipse(18206.250000, 33621.272000, 1782.840051, 1782.840051, 0.000000, X, Y) && !ellipse(19290.862000, 33026.700000, 1707.544049, 1707.544049, 0.000000, X, Y) && !ellipse(18786.098000, 33320.588000, 1746.552050, 1746.552050, 0.000000, X, Y) && !ellipse(27920.606110, 10319.685440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23007.318000, 30332.600000, 1344.216039, 1344.216039, 0.000000, X, Y) && !ellipse(28940.190000, 22491.650000, 2609.200075, 2609.200075, 0.000000, X, Y) && !ellipse(23136.144000, 29927.850000, 2644.256076, 2644.256076, 0.000000, X, Y) && !ellipse(29387.560200, 22449.231800, 804.088023, 804.088023, 0.000000, X, Y) && !ellipse(26765.790497, 17692.407089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.740692, 13441.595001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29559.326000, 24425.793600, 683.712820, 683.712820, 0.000000, X, Y) && !ellipse(29646.780000, 22415.771400, 1608.176046, 1608.176046, 0.000000, X, Y) && !ellipse(23442.008000, 29998.076400, 1322.128038, 588.004817, 52.810700, X, Y) && !ellipse(30311.208000, 21647.022000, 1446.272042, 1446.272042, 0.000000, X, Y) && !ellipse(27244.444489, 28319.909241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29500.742000, 12821.368000, 1966.616057, 1966.616057, 0.000000, X, Y) && !ellipse(24348.416000, 29218.438000, 1322.128038, 1322.128038, 0.000000, X, Y) && !ellipse(27010.995728, 17002.135315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23082.015040, 24587.463000, 334.878410, 334.878410, 0.000000, X, Y) && !ellipse(30951.407013, 31122.911285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28637.034000, 24030.996000, 729.800021, 729.800021, 0.000000, X, Y) && !ellipse(29155.526611, 12222.704239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.392000, 28644.100000, 1257.240036, 1257.240036, 0.000000, X, Y) && !ellipse(28376.600000, 10881.132000, 2002.248058, 2002.248058, 0.000000, X, Y) && !ellipse(24455.479200, 25136.901800, 1137.480033, 1137.480033, 0.000000, X, Y) && !ellipse(18239.745361, 32487.511383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17949.446759, 33821.030671, 3493.104101, 1841.044082, 32.002341, X, Y) && !ellipse(25822.384000, 11295.720000, 2040.336059, 2040.336059, 0.000000, X, Y) && !ellipse(28858.766022, 20226.843628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.514618, 23611.376740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28801.534210, 23183.123169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27895.794861, 27288.111755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28701.188000, 11516.590000, 11426.496329, 11426.496329, 0.000000, X, Y) && !ellipse(26490.933899, 11346.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32383.240417, 40760.051666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26444.449646, 10748.243011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26116.244200, 24539.618000, 1936.152056, 1026.760030, 75.747300, X, Y) && !ellipse(31001.608000, 12064.798000, 1667.400048, 1667.400048, 0.000000, X, Y) && !ellipse(28944.369476, 19606.854462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.067566, 26402.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26929.531000, 21545.283000, 1321.536038, 1321.536038, 0.000000, X, Y) && !ellipse(20681.433762, 33066.788330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.848511, 15514.641876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29564.172791, 19671.700897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30180.243134, 16627.428375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23195.171692, 20461.370331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28174.410980, 21730.445129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.336200, 29351.706800, 950.584027, 950.584027, 0.000000, X, Y) && !ellipse(18073.103000, 20627.122000, 1597.616046, 1597.616046, 0.000000, X, Y) && !ellipse(23751.476000, 28789.416000, 1182.936034, 1182.936034, 0.000000, X, Y) && !ellipse(31586.463470, 13539.142105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.342804, 24740.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19597.930000, 20098.424000, 1608.880046, 1608.880046, 0.000000, X, Y) && !ellipse(17557.222000, 24024.740000, 1592.288046, 1592.288046, 0.000000, X, Y) && !ellipse(21283.838669, 21152.475784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29498.382000, 24420.306000, 1323.520038, 1323.520038, 0.000000, X, Y) && !ellipse(29289.045380, 20893.082077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27196.870000, 21982.696000, 1281.168037, 1281.168037, 0.000000, X, Y) && !ellipse(30145.353394, 16110.909683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23024.630000, 11828.134800, 1973.184057, 1973.184057, 0.000000, X, Y) && !ellipse(25699.243988, 17342.168900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11254.351334, 34043.594849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26779.421417, 18657.786362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18109.930400, 22831.797846, 1001.104029, 1001.104029, 0.000000, X, Y) && !ellipse(21705.617950, 11616.738937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23843.657288, 30688.967987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25254.346000, 10916.582000, 2014.528058, 2014.528058, 0.000000, X, Y) && !ellipse(18475.664627, 17520.735550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29882.155029, 21065.589951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41771.370911, 31100.614349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.472412, 31178.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23687.615906, 24632.224884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25736.363953, 19140.177307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33198.772491, 35339.164185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.928400, 25832.085800, 1456.312042, 1456.312042, 0.000000, X, Y) && !ellipse(18911.876648, 20919.957611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24137.182000, 31185.810000, 1375.488040, 1375.488040, 0.000000, X, Y) && !ellipse(23872.530731, 11440.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22709.932000, 11302.096800, 2024.488058, 727.584821, 16.565500, X, Y) && !ellipse(26010.985000, 24068.224000, 1181.400034, 1181.400034, 0.000000, X, Y) && !ellipse(31053.500854, 13156.604156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.404846, 11682.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15888.920029, 35194.289856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23220.389160, 31697.555206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20050.638626, 20042.092087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.104218, 21174.034622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18214.582321, 25354.159210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29096.656647, 15782.206436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18677.057892, 22747.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30382.561676, 28567.849152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18806.498535, 21957.933350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19679.115067, 22625.574982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35677.576874, 25639.343872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20258.579193, 26404.873779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.526978, 12658.726425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24101.996948, 11028.593529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19869.260300, 19374.295135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19411.624847, 21792.031189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19807.195007, 38470.734070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19832.424423, 21429.954224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24714.167053, 20596.787445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25962.824677, 12406.768127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16851.459747, 24052.711639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21438.386597, 29788.198853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22351.249390, 27562.171844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24773.629089, 29698.222565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.067413, 30325.887421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18132.332169, 18090.842026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19955.767792, 21895.051636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13343.459808, 27004.666138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21914.990906, 18639.393646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13337.728928, 35449.106293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12999.995926, 21349.218765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28565.887085, 29361.782562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26758.497131, 23780.064026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19467.576935, 22841.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23382.784027, 11192.753326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18846.918701, 25353.121094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31938.116791, 32912.743530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14735.993469, 35703.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23228.802948, 32367.318207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15592.134216, 23348.969574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24807.825867, 23013.559723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22274.763306, 18888.400879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.041534, 12828.358902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.909729, 29272.979797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23842.669617, 28058.829590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18484.689072, 23344.373718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24095.362030, 23979.881531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20324.882000, 19756.722000, 1581.920046, 1581.920046, 0.000000, X, Y) && !ellipse(25884.023407, 12038.551407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37506.153961, 22995.221436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20644.982864, 21089.940552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39077.543671, 37676.134247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18071.810776, 24489.344482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.813644, 12655.126205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.716583, 11780.377686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33202.032867, 36065.904114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16168.442841, 34411.932373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28834.368958, 28643.594482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17566.922440, 32687.299683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23806.776276, 23034.484009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19746.011185, 31380.196899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.053070, 17275.051086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21085.456207, 33185.555756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17407.252000, 34248.252000, 1782.840051, 1782.840051, 0.000000, X, Y) && !ellipse(14251.786484, 17533.487656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19717.850000, 20816.230800, 1596.896046, 1596.896046, 0.000000, X, Y) && !ellipse(29207.838654, 30598.351837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.481049, 35909.921143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22999.896942, 29109.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14218.323822, 35625.562195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17405.991821, 18228.469452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13906.085739, 17001.430405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12937.625305, 27005.061737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23564.114563, 12472.774811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12450.646469, 36644.835907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13359.782928, 17370.419739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21934.178802, 17808.777023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14532.989929, 17095.572433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28553.620850, 28236.472290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31254.648529, 33583.414551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20024.352509, 24782.746460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27683.172150, 17897.591736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16430.786285, 18575.059631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.095306, 32547.783203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16992.265244, 21683.481644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23587.011536, 24155.065674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25360.964050, 12636.089645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18389.673538, 19713.242813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19549.764694, 24201.244598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13566.997345, 35874.736694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35041.291138, 14815.919144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20734.775955, 25798.388092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29913.686157, 17068.564148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14254.648605, 25612.137787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24876.774323, 21048.799545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15382.270081, 22930.088257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14231.176819, 27098.064758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20483.140244, 19174.335587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15947.468735, 25883.078217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20513.278809, 12124.541168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40680.445923, 24846.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11606.552917, 27802.826355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16083.055771, 28493.529572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16674.752945, 33983.182312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34237.507568, 24729.319305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15586.712646, 24219.404999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20016.585220, 12381.461716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15569.813385, 32090.287140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16571.729843, 27781.158661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14154.616394, 18396.751846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27485.582214, 12160.220779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.262451, 11789.512314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.480316, 30742.267700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10503.234253, 24999.118073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15727.264587, 34437.659607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11356.942993, 22417.048981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27206.843964, 13213.677994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.865173, 26861.337036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17200.548309, 19408.995041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12892.228287, 26577.169250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12903.737839, 36665.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30595.688843, 26841.896912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12267.806549, 20877.774506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13031.394302, 20145.039520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22277.944031, 41170.269623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16430.620346, 22147.510406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11713.733795, 35008.326294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38423.580750, 16152.845871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17578.924500, 14040.557663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12883.633957, 35542.860687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28899.135742, 25021.940704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11233.274384, 24680.341980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11500.630524, 22887.565308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16468.974899, 34846.765106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11907.605362, 35797.716949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15874.707657, 27979.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15285.666840, 34779.539764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16211.354752, 25183.231079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21265.670303, 12200.925034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19121.015961, 17919.992218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.811981, 39277.241699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11101.754852, 23000.523529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14749.065506, 27183.304474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15857.031799, 18917.156174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16534.426682, 33158.808990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18152.766460, 21841.592000, 1631.432047, 1631.432047, 0.000000, X, Y) && !ellipse(16167.173737, 28909.694794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16612.776596, 23570.491943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10811.458595, 22632.552399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18835.375961, 29283.007843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12869.169357, 36119.957855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17147.344177, 21174.312073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15878.164505, 22593.831451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15545.326050, 27262.233185, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 19:38:22 2013] Writing fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src52.gif
[Thu Jun  6 19:38:46 2013] ../../xmm0555630501/products/events/fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src52_src.evt and ../../xmm0555630501/products/events/fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src52_bgd.evt exist, delete to re-create
[Thu Jun  6 19:38:46 2013] Mean detx,y = (4383.59, 5397.75)