[Thu Jun  6 19:28:14 2013] Detection parameters:
  Position = (314.8, 117.2) = 15 1 48.04 -42 3 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1627.7 +/- 53.6
  Background counts = 163.5
  Rate = 0.01 +/- 0.0004

[Thu Jun  6 19:28:14 2013] Off-axis axis estimate = 13.20'
[Thu Jun  6 19:30:43 2013] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  6 19:30:43 2013] Initial guess for spatial extent in simple fitting = 13.03"
[Thu Jun  6 19:30:43 2013] source mask rpix=3.0, npix_max = 48, mask sum = 46, frac = 0.942
[Thu Jun  6 19:30:43 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.03"
[Thu Jun  6 19:30:45 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun  6 19:30:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src15.csv
[Thu Jun  6 19:30:45 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun  6 19:30:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src15.csv
[Thu Jun  6 19:30:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:30:47 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun  6 19:30:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun  6 19:30:47 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun  6 19:30:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun  6 19:30:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:32:02 2013] Spatial fit model total counts = 8473.800000, observed total counts = 6605.000000
[Thu Jun  6 19:32:02 2013] Poor agreement between spatial fit and data for source 306
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 19:32:02 2013] Spatial fit model total counts = 10279.900000, observed total counts = 7568.000000
[Thu Jun  6 19:32:02 2013] Poor agreement between spatial fit and data for source 306
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 19:32:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:32:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:32:03 2013] Assessing source extent using major
[Thu Jun  6 19:32:03 2013] Source does appear to be extended
[Thu Jun  6 19:32:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:32:03 2013] Source is confused with source 49
[Thu Jun  6 19:32:03 2013] Source is confused with source 300
[Thu Jun  6 19:33:26 2013] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:26 2013] Initial guess for spatial extent in simple fitting = 13.03"
[Thu Jun  6 19:33:26 2013] source mask rpix=3.0, npix_max = 48, mask sum = 46, frac = 0.942
[Thu Jun  6 19:33:26 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 13.03"
[Thu Jun  6 19:33:27 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src14.ximg exists
[Thu Jun  6 19:33:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src14.csv
[Thu Jun  6 19:33:27 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Jun  6 19:33:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src14.csv
[Thu Jun  6 19:33:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:33:29 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Jun  6 19:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu Jun  6 19:33:29 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Jun  6 19:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu Jun  6 19:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:34:48 2013] Warning, spatial fit 14 centroid is now closest to src. 301
[Thu Jun  6 19:34:48 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 306 at 11.552969 pixels away
[Thu Jun  6 19:34:49 2013] Spatial fit model total counts = 7497.460000, observed total counts = 6481.000000
[Thu Jun  6 19:34:49 2013] Poor agreement between spatial fit and data for source 306
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 19:34:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:49 2013] Assessing source extent using major
[Thu Jun  6 19:34:49 2013] Source does appear to be extended
[Thu Jun  6 19:34:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:38:22 2013] Counts = 1627.747559, rescaling region sizes by 2.000000
[Thu Jun  6 19:38:22 2013] XMMSAS src. selection expression = ellipse(27342.988556, 10144.168091, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun  6 19:38:22 2013] Not overwriting source region fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src306_src.reg
[Thu Jun  6 19:38:22 2013] Extracting stamp from image fullrun_mos2_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (240, 42) - (390, 192)
[Thu Jun  6 19:38:22 2013] XMMSAS bgd. selection expression = annulus(27342.988556, 10144.168091, 4350.000000, 8700.000000, X, Y) && !ellipse(31169.209686, 15961.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31252.997101, 16569.677505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30943.123322, 17960.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30961.730200, 19646.333200, 1340.760039, 1340.760039, 0.000000, X, Y) && !ellipse(30655.976593, 14371.207047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30902.997864, 17438.440262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31021.040466, 15286.155365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.606110, 10319.685440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.790497, 17692.407089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.740692, 13441.595001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29500.742000, 12821.368000, 1966.616057, 1966.616057, 0.000000, X, Y) && !ellipse(27010.995728, 17002.135315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29155.526611, 12222.704239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28376.600000, 10881.132000, 2002.248058, 2002.248058, 0.000000, X, Y) && !ellipse(25822.384000, 11295.720000, 2040.336059, 2040.336059, 0.000000, X, Y) && !ellipse(28701.188000, 11516.590000, 11426.496329, 11426.496329, 0.000000, X, Y) && !ellipse(26490.933899, 11346.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26444.449646, 10748.243011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31001.608000, 12064.798000, 1667.400048, 1667.400048, 0.000000, X, Y) && !ellipse(28944.369476, 19606.854462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.848511, 15514.641876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29564.172791, 19671.700897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30180.243134, 16627.428375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31586.463470, 13539.142105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19597.930000, 20098.424000, 1608.880046, 1608.880046, 0.000000, X, Y) && !ellipse(30145.353394, 16110.909683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23024.630000, 11828.134800, 1973.184057, 1973.184057, 0.000000, X, Y) && !ellipse(25699.243988, 17342.168900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26779.421417, 18657.786362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21705.617950, 11616.738937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25254.346000, 10916.582000, 2014.528058, 2014.528058, 0.000000, X, Y) && !ellipse(18475.664627, 17520.735550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25736.363953, 19140.177307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23872.530731, 11440.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22709.932000, 11302.096800, 2024.488058, 727.584821, 16.565500, X, Y) && !ellipse(31053.500854, 13156.604156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.404846, 11682.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29096.656647, 15782.206436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.526978, 12658.726425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24101.996948, 11028.593529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19869.260300, 19374.295135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25962.824677, 12406.768127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18132.332169, 18090.842026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21914.990906, 18639.393646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23382.784027, 11192.753326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22274.763306, 18888.400879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.041534, 12828.358902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20324.882000, 19756.722000, 1581.920046, 1581.920046, 0.000000, X, Y) && !ellipse(25884.023407, 12038.551407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.813644, 12655.126205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.716583, 11780.377686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.053070, 17275.051086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23564.114563, 12472.774811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21934.178802, 17808.777023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27683.172150, 17897.591736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25360.964050, 12636.089645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18389.673538, 19713.242813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35041.291138, 14815.919144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29913.686157, 17068.564148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20483.140244, 19174.335587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20513.278809, 12124.541168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20016.585220, 12381.461716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27485.582214, 12160.220779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.262451, 11789.512314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27206.843964, 13213.677994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21265.670303, 12200.925034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19121.015961, 17919.992218, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 19:38:22 2013] Writing fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src306.gif