[Thu Jun  6 19:28:07 2013] Detection parameters:
  Position = (245.2, 243.7) = 15 2 15.19 -41 54 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.0 +/- 31.1
  Background counts = 282.9
  Rate = 0.004 +/- 0.0004

[Thu Jun  6 19:28:14 2013] Off-axis axis estimate = 5.54'
[Thu Jun  6 19:30:43 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:43 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Thu Jun  6 19:30:43 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Thu Jun  6 19:30:43 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 9.20"
[Thu Jun  6 19:30:46 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src70.ximg exists
[Thu Jun  6 19:30:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src70.csv
[Thu Jun  6 19:30:46 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src70_1.ximg exists
[Thu Jun  6 19:30:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src70.csv
[Thu Jun  6 19:30:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:30:48 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Thu Jun  6 19:30:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src70.csv
[Thu Jun  6 19:30:48 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Thu Jun  6 19:30:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src70.csv
[Thu Jun  6 19:30:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:32:03 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 211 at 10.920365 pixels away
[Thu Jun  6 19:32:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:32:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:32:03 2013] Assessing source extent using major
[Thu Jun  6 19:32:03 2013] Source does appear to be extended
[Thu Jun  6 19:32:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:32:03 2013] Source is confused with source 209
[Thu Jun  6 19:33:26 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:26 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Thu Jun  6 19:33:26 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Thu Jun  6 19:33:26 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 9.20"
[Thu Jun  6 19:33:28 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src69.ximg exists
[Thu Jun  6 19:33:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src69.csv
[Thu Jun  6 19:33:28 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src69_1.ximg exists
[Thu Jun  6 19:33:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src69.csv
[Thu Jun  6 19:33:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:33:30 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Thu Jun  6 19:33:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src69.csv
[Thu Jun  6 19:33:30 2013] fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Thu Jun  6 19:33:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src69.csv
[Thu Jun  6 19:33:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:34:49 2013] Warning, spatial fit 69 centroid is now closest to src. 193
[Thu Jun  6 19:34:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:49 2013] Assessing source extent using major
[Thu Jun  6 19:34:49 2013] Source does appear to be extended
[Thu Jun  6 19:34:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:38:31 2013] XMMSAS src. selection expression = ellipse(21283.838669, 21152.475784, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 19:38:31 2013] Not overwriting source region fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src211_src.reg
[Thu Jun  6 19:38:31 2013] Extracting stamp from image fullrun_mos2_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (208, 206) - (283, 281)
[Thu Jun  6 19:38:31 2013] XMMSAS bgd. selection expression = annulus(21283.838669, 21152.475784, 1087.500000, 2175.000000, X, Y) && !ellipse(28701.188000, 11516.590000, 11426.496329, 11426.496329, 0.000000, X, Y) && !ellipse(23195.171692, 20461.370331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18073.103000, 20627.122000, 1597.616046, 1597.616046, 0.000000, X, Y) && !ellipse(19597.930000, 20098.424000, 1608.880046, 1608.880046, 0.000000, X, Y) && !ellipse(17557.222000, 24024.740000, 1592.288046, 1592.288046, 0.000000, X, Y) && !ellipse(18109.930400, 22831.797846, 1001.104029, 1001.104029, 0.000000, X, Y) && !ellipse(18911.876648, 20919.957611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20050.638626, 20042.092087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.104218, 21174.034622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18677.057892, 22747.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18806.498535, 21957.933350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19679.115067, 22625.574982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19869.260300, 19374.295135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19411.624847, 21792.031189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19832.424423, 21429.954224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19955.767792, 21895.051636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21914.990906, 18639.393646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19467.576935, 22841.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22274.763306, 18888.400879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18484.689072, 23344.373718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24095.362030, 23979.881531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20324.882000, 19756.722000, 1581.920046, 1581.920046, 0.000000, X, Y) && !ellipse(20644.982864, 21089.940552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23806.776276, 23034.484009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19717.850000, 20816.230800, 1596.896046, 1596.896046, 0.000000, X, Y) && !ellipse(23587.011536, 24155.065674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18389.673538, 19713.242813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20483.140244, 19174.335587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18152.766460, 21841.592000, 1631.432047, 1631.432047, 0.000000, X, Y)
[Thu Jun  6 19:38:31 2013] Writing fullrun_mos2_xmm0555630501_pi300-10000_pass1_cl_src211.gif