[Thu Jun  6 19:27:39 2013] Detection parameters:
  Position = (298.4, 334.1) = 15 1 54.44 -41 47 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 494.8 +/- 35.7
  Background counts = 334.1
  Rate = 0.005 +/- 0.0003

[Thu Jun  6 19:27:51 2013] Off-axis axis estimate = 2.59'
[Thu Jun  6 19:30:38 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:38 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Jun  6 19:30:38 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Thu Jun  6 19:30:38 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 7.72"
[Thu Jun  6 19:30:40 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src39.ximg exists
[Thu Jun  6 19:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src39.csv
[Thu Jun  6 19:30:40 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Jun  6 19:30:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src39.csv
[Thu Jun  6 19:30:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:30:42 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Jun  6 19:30:42 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Jun  6 19:30:42 2013] Fit fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Jun  6 19:31:44 2013] Warning, spatial fit 39 centroid is now closest to src. 200
[Thu Jun  6 19:31:44 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:31:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:31:44 2013] Assessing source extent using major
[Thu Jun  6 19:31:44 2013] Source does appear to be extended
[Thu Jun  6 19:31:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:31:44 2013] Source is confused with source 200
[Thu Jun  6 19:33:19 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:19 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Jun  6 19:33:19 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Thu Jun  6 19:33:19 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 7.72"
[Thu Jun  6 19:33:21 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src39.ximg exists
[Thu Jun  6 19:33:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src39.csv
[Thu Jun  6 19:33:21 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Jun  6 19:33:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src39.csv
[Thu Jun  6 19:33:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:33:23 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Jun  6 19:33:23 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Jun  6 19:33:23 2013] Fit fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Jun  6 19:34:27 2013] Warning, spatial fit 39 centroid is now closest to src. 200
[Thu Jun  6 19:34:27 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:27 2013] Assessing source extent using major
[Thu Jun  6 19:34:27 2013] Source does appear to be extended
[Thu Jun  6 19:34:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:37:12 2013] XMMSAS src. selection expression = ellipse(25916.266083, 29021.129028, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 19:37:12 2013] Not overwriting source region fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_src.reg
[Thu Jun  6 19:37:12 2013] Extracting stamp from image fullrun_mos1_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (261, 297) - (336, 372)
[Thu Jun  6 19:37:12 2013] XMMSAS bgd. selection expression = annulus(25916.266083, 29021.129028, 1087.500000, 2175.000000, X, Y) && !ellipse(26549.364000, 27771.242000, 6603.696190, 6603.696190, 0.000000, X, Y) && !ellipse(26738.178600, 27294.102000, 1648.568047, 1648.568047, 0.000000, X, Y) && !ellipse(24884.730591, 28700.172614, 1079.280748, 407.314636, 167.556815, X, Y) && !ellipse(23197.222000, 30132.542000, 2572.352074, 778.780022, 41.274000, X, Y) && !ellipse(23416.058000, 29997.464000, 1402.672040, 1402.672040, 0.000000, X, Y) && !ellipse(23760.352800, 28487.014000, 733.138421, 733.138421, 0.000000, X, Y) && !ellipse(27176.005798, 28317.299347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23886.251400, 31476.974200, 464.915213, 464.915213, 0.000000, X, Y) && !ellipse(27892.866364, 27289.821594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23088.758118, 31198.969910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29624.126000, 24402.038000, 2701.984078, 878.160025, 66.913000, X, Y) && !ellipse(26862.409800, 26687.008000, 1102.088032, 1102.088032, 0.000000, X, Y) && !ellipse(22327.502000, 32693.620000, 1531.912044, 1531.912044, 0.000000, X, Y) && !ellipse(23878.414000, 27523.484000, 840.992024, 840.992024, 0.000000, X, Y) && !ellipse(27000.229584, 26138.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22490.247000, 27242.252000, 1279.072037, 1279.072037, 0.000000, X, Y) && !ellipse(25068.470093, 29324.612152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.598938, 31778.822998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28471.247000, 29433.980400, 1036.816030, 1036.816030, 0.000000, X, Y) && !ellipse(24366.363525, 30628.173126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28581.118988, 28248.650909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24797.776581, 31847.742249, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24510.651093, 29788.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23047.169739, 29095.464539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28939.003662, 28641.523560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17464.826000, 34188.940000, 10267.032295, 10267.032295, 0.000000, X, Y) && !ellipse(25633.454000, 29714.306000, 1235.616036, 1235.616036, 0.000000, X, Y) && !ellipse(26133.378448, 26154.382385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25356.530151, 30998.576263, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 19:37:12 2013] Writing fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87.gif
[Thu Jun  6 19:37:31 2013] ../../xmm0555630501/products/events/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_src.evt and ../../xmm0555630501/products/events/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_bgd.evt exist, delete to re-create
[Thu Jun  6 19:37:31 2013] Mean detx,y = (1429.37, -464.32) 
[Thu Jun  6 19:37:31 2013] ../../xmm0555630501/products/images/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_src.img and ../../xmm0555630501/products/images/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_bgd.img exist, delete to re-create
[Thu Jun  6 19:37:31 2013] ../../xmm0555630501/products/spectra/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_src_b10.pi.gz and ../../xmm0555630501/products/spectra/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_bgd.pi exist, delete to re-create
[Thu Jun  6 19:37:31 2013] Setting source spectrum file to fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Thu Jun  6 19:37:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Thu Jun  6 19:37:31 2013] ../../xmm0555630501/products/lightcurves/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_src.lc and ../../xmm0555630501/products/lightcurves/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87_bgd.lc exist, delete to re-create
[Thu Jun  6 19:38:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun  6 19:38:19 2013] rmf not generated due to insufficient counts
[Thu Jun  6 19:38:19 2013] fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src87.arf exists, delete to re-create