[Thu Jun  6 19:27:36 2013] Detection parameters:
  Position = (311.7, 247.9) = 15 1 49.29 -41 53 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 737.4 +/- 42.5
  Background counts = 331.3
  Rate = 0.008 +/- 0.0005

[Thu Jun  6 19:27:51 2013] Off-axis axis estimate = 3.79'
[Thu Jun  6 19:30:38 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:30:38 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Thu Jun  6 19:30:38 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.073
[Thu Jun  6 19:30:38 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.32"
[Thu Jun  6 19:30:39 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src17.ximg exists
[Thu Jun  6 19:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src17.csv
[Thu Jun  6 19:30:39 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Jun  6 19:30:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src17.csv
[Thu Jun  6 19:30:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:30:42 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Jun  6 19:30:42 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Jun  6 19:30:42 2013] Fit fullrun_mos1_xmm0555630501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Jun  6 19:31:44 2013] Spatial fit model total counts = 6089.740000, observed total counts = 5808.000000
[Thu Jun  6 19:31:44 2013] Offset between fit and detection position for source 47 = 0.529316 pixels
[Thu Jun  6 19:31:44 2013] 5805.299000 total counts/ 5398.460000 bgd. counts: snr = 5.537167
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.529316 pixels
  Position = (312.2, 247.9) = 15 1 49.08 -41 53 58.3
  Extent = 8.2 (6.7-10.2)", rotation angle = 0
  Source counts = 406.8 +/- 76.2
  Background counts = 5398.5
  Rate = 0.003 +/- 0.0006
[Thu Jun  6 19:31:44 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:31:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:31:44 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 19:31:44 2013] Source does appear to be extended
[Thu Jun  6 19:31:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:31:44 2013] Source is confused with source 43
[Thu Jun  6 19:33:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 19:33:19 2013] Initial guess for spatial extent in simple fitting = 8.16"
[Thu Jun  6 19:33:19 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.886
[Thu Jun  6 19:33:19 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.16"
[Thu Jun  6 19:33:20 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jun  6 19:33:20 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jun  6 19:33:20 2013] Fit fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_src17 appears to have run properly
[Thu Jun  6 19:33:23 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jun  6 19:33:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu Jun  6 19:33:23 2013] fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jun  6 19:33:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu Jun  6 19:33:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555630501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 19:34:26 2013] Warning, spatial fit 17 centroid is now closest to src. 233
[Thu Jun  6 19:34:27 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 19:34:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 19:34:27 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 19:34:27 2013] Source does appear to be extended
[Thu Jun  6 19:34:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 19:37:09 2013] XMMSAS src. selection expression = ellipse(27113.698200, 21518.732800, 489.618014, 489.618014, 0.000000, X, Y)
[Thu Jun  6 19:37:09 2013] Not overwriting source region fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_src.reg
[Thu Jun  6 19:37:09 2013] Extracting stamp from image fullrun_mos1_xmm0555630501_pi300-10000_cl_sm2.00.img.gz, (284, 220) - (340, 276)
[Thu Jun  6 19:37:09 2013] XMMSAS bgd. selection expression = annulus(27113.698200, 21518.732800, 816.030023, 1632.060047, X, Y) && !ellipse(26549.364000, 27771.242000, 6603.696190, 6603.696190, 0.000000, X, Y) && !ellipse(28655.214000, 22889.458000, 1529.224044, 1529.224044, 0.000000, X, Y) && !ellipse(26337.284698, 21881.617188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29287.502000, 22253.620000, 1531.912044, 1531.912044, 0.000000, X, Y) && !ellipse(26833.053009, 21978.106262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27964.611600, 23701.071200, 744.890421, 744.890421, 0.000000, X, Y) && !ellipse(26107.162600, 24348.044400, 2291.768066, 2291.768066, 0.000000, X, Y) && !ellipse(29624.126000, 24402.038000, 2701.984078, 878.160025, 66.913000, X, Y) && !ellipse(27700.734800, 22470.898600, 1283.344037, 691.737620, -0.000000, X, Y) && !ellipse(28847.681274, 21891.434158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24875.136000, 23012.446280, 1057.136030, 1057.136030, 0.000000, X, Y) && !ellipse(24844.676000, 20921.484000, 1395.224040, 1395.224040, 0.000000, X, Y) && !ellipse(28304.074646, 21711.691330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23598.764000, 23950.946000, 2383.928069, 2383.928069, 0.000000, X, Y) && !ellipse(26049.325531, 20939.576950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.539400, 21111.962000, 1329.712038, 621.064018, 90.000000, X, Y) && !ellipse(27345.928000, 23194.318000, 1196.824034, 1196.824034, 0.000000, X, Y) && !ellipse(25891.964000, 22129.924400, 1298.960037, 1298.960037, 0.000000, X, Y) && !ellipse(25150.181274, 22297.877991, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 19:37:09 2013] Writing fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47.gif
[Thu Jun  6 19:37:28 2013] ../../xmm0555630501/products/events/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0555630501/products/events/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create
[Thu Jun  6 19:37:28 2013] Mean detx,y = (-5955.23, -1636.28) 
[Thu Jun  6 19:37:28 2013] ../../xmm0555630501/products/images/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_src.img and ../../xmm0555630501/products/images/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create
[Thu Jun  6 19:37:28 2013] ../../xmm0555630501/products/spectra/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0555630501/products/spectra/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create
[Thu Jun  6 19:37:28 2013] Setting source spectrum file to fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Thu Jun  6 19:37:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Thu Jun  6 19:37:28 2013] ../../xmm0555630501/products/lightcurves/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0555630501/products/lightcurves/fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create
[Thu Jun  6 19:38:19 2013] fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47.rmf exists, delete to re-create
[Thu Jun  6 19:38:19 2013] fullrun_mos1_xmm0555630501_pi300-10000_pass1_cl_src47.arf exists, delete to re-create